-
Passed ICND1 Today
Scored a 903/1000. I want to say I studied off and on for 2 months. Other certifications and and some previous experience allowed me to pickup networking theory pretty fast and allowed me to re-learn a lot of the commands and outputs. I primary used Pularsight ICND1 course and CBT nuggets for topics I couldn't properly…
-
CCNA Security Simulator / Labs
Hello. I utilized Wendell Odom's ICND1 network simulator to help me get the "hands on" experience while not spending a fortune on setting up a physical lab. Are there any similar software packages out there like that for the 210-260 route? If I have to buckle down and purchase the equipment off eBay, then I guess I have no…
-
Question about ICND2 syllabus
Hi guys! I passed ICND1 in December and I'm now preparing for ICND2. My question is: In ICND2 syllabus ACLs,DHCP,NAT etc. are not included because they are ICND1's topics. If so, the ICND2 test will or will not have questions regarding these topics,like config a DHCP pool,tshoot ACL?
-
Failed ICND 1 today
scored 769/804. What are the chances of the same questions re-appearing if I were to resit the exam next week or next month?
-
Debug
Hello Are debugs only in ICND2 becuz their arnt any commands in the ccent book?
-
what license does a asa5505 need for doing the security certs
What asa license does one need to study for the ccna:s? security plus or base license, number of users, VPNs, etc? What would be good for the ccnp:s? Thanks
-
what layer of the IOS model is CRC erro
what layer of the IOS model is CRC erro
-
Redundant network help
Hello guys, im working on a university project and ive tried to create a basic large network that simulates HSRP between two sites, active and DR. i was just trying to simulate a ping between the two PCs between active and DR, i was then going to shut down some of the routers and through HSRP the packets should switch…
-
3560G upgrade to 15 help quesitons
I have 3560G 48TS-S, 32 flash, etc. I tried upgrade to 15.2, even Se8 and keeps failing, is there a specific image to use , I have used the archive overwrite, tried just bin, and tar that I had, but nothing appears to work. Any one have 3560G with 15 on it? which version, and is there a trick to load?
-
CCENT Scheduled 13 May
I bought ExSim Max today for Boson just to do a bit of a progress check. Results were -Exam A 759/1000 (That got me feeling a little cocky since I was a month out). -Exam C 554/1000 (And that made me feel like scheduling the actual exam was a big mistake ). I think I'm going to save Exam B for about a week out. Does anyone…
-
Is a Lab Necessary?
I am currently a Help Desk Support Tech for about 250 users. I do minor Cisco tasks right now (backups, configuring ports, etc.) and I enjoy it, so this is the route I have decided to take. I have no other certs and have been racking my brain back and forth for weeks as to what to start with. I have finally decided to take…
-
Squeaked by...ICND2 (Recert)
Wow. I squeaked by on my ICND2 to recertify my CCNA. I was dreading retaking the test, putting off studying. But a pass is a pass man. All I kept thinking when I saw the score was...wow and then 3 MORE YEARS kept repeating in my mind on the way out. Welp, my Network+ is due next year, wonder if ICND2 will count as full CE…
-
CCENT scheduled mid April
Been using Laz/udemy and the h2p site. any tips or suggestions? This will be my 2nd attempt. My first attempt was in 08 for the CCNA....649-801 (I think it was)
-
Practice labs, Scenerios, and CCNA Sec
Putting my lab together, as to work hands on. I have to renew my CCNA, so going to do the Security, but as I upgrade some of my equipment, I been looking for good lab scenerios, for ccna, np, and sec in general. I know cert kits here sells some stuff, but their sec stuff is for old exam, I am looking for good scenario…
-
ICDN1 Exam - Does it include SDM related questions?
Hi, I can't see it in the objectives so i'm guessing it doesn't, but wanted to clarify, does the ICND1 exam include any question relating to Cisco SDM? Thanks
-
Will this switch work?
Hey all, I just got a used 3524 XL PWR switch from a friend who was trying to get rid of them from an office seeing they don't need them. Got it for a good $50 deal and haven't been home yet with it to plug it in and test it. Seeing I have 2x 2960s, will a 3524 do me any good with the CCENT/CCNA exams?
-
Enterprise IP Addressing
Got a quick question if I may. How does the enterprise IP scheme look like on the external side of things, (Not the private addresses i.e. 192.168x.x, 172.16.x.x, or the 10.x.x.x) But the public IP addresses. Take a fictional company ABC LLC. who has multiple sites all over the US would their IP scheme all fall into the…
-
Why the router drop the 2nd ping???!!!!
Hey guys How r u all ? I just waiting my flight in the Airport and I just do the little topology from my mind I putted : 1 ISP 2 Company's Router 2 Switch 2 PC I did the configuration with Redundancy, But the first ping from the PC to the ISP the First ping is hit it the second ping dropped and the 3rd and 4th hit it My…
-
Cisco UCS
In plain English, what the heck is Cisco UCS? How does it tie into ESX, Hyper-V? (is it a competitor to these products?) If i wanted to study for it; which cert would i start with? (the Data Center track?) Is the only way to get real experience through a job that uses the hardware? Any insight is appreciated!
-
Help with job search!
So I still need to finish up my CCNA with studying for test 200-101. In the meantime I have been scoping out the job market. After getting no response from managers in my own company's IT department, I started searching elsewhere. Most of the major companies require DoD security clearances and some even list DoD 8570 IAT…
-
Should i change my CCNA Lab Routers?
I have the following setup: 2621 - 16 MB flash - 64 MB ram - nm8 a/s - wic1t s 2610xm - 16 MB flash - 16 MB flash - 32 MB ram - wic1t s - wic1b s/t 2620xm 16 MB flash - 32MB ram - wic1b s/t - 1nm4t 1801 - 32 MB flash - 128 MB ram c2950 x2 c2924 3560G - 16 MB flash - 128 MB ram As2509 Rj with transceiver I'm noticing a lack…
-
Shortened Commands on CCENT
Question and hopefully this does not violate NDA. I have a question about the simulations on the ICND 100-101. Do you have to spell out entire commands? For example: show vice sh, or will the shortened version be excepted. Will that tab key or ? work as well. I've been using simulators for practice labs which allow me to…
-
ccna 3 scaling networks HSRP question
hello, i'm currently in my ccna 3. we have to make a project.i have a question for my project. we have to make 3 sites. i have made networks with vlans configured everything routers & switches. added dhcp pools for vlans. added switch security. added rapid pvst and etherchannel. i have made everything in packet tracer and…
-
IP Route Command help
Hi, I am working on some of my commands, getting ready for testing. One I am having some trouble with is IP route/ static routes. I thought I had a good understanding of it, but it seems like I cannot actually apply when I try to do it in Packet Tracer. The command is: ip route (destination/remote network id and…
-
Cisco CCNA Security 210-260 exam labs
Hi guys, somebody can share the link to site from where I can see how is look the new labs for the Cisco CCNA Security 210-260. Thank you.
-
does switches perform arp broadcast?
415 831.476675 Private_66:68:02 Broadcast ARP 64 Who has 10.0.0.1? Tell 10.0.0.3 [ETHERNET FRAME CHECK SEQUENCE INCORRECT] 416 831.477150 Private_66:68:00 Private_66:68:02 ARP 64 10.0.0.1 is at 00:50:79:66:68:00 [ETHERNET FRAME CHECK SEQUENCE INCORRECT] 417 831.477650 10.0.0.3 10.0.0.1 ICMP 98 Echo (ping) request…
-
cross over cable for switch to hub? and router to server?
Hi, I knew that you should use a straight through cable for host to switch, switch to router, and host to router. plus a rolled cable for console access to network devices. However I recently encountered an exam practice question that asked when a cross over cable should be used, two of the three correct answers were: when…
-
Pearson Vue no extra 30 minutes for ICND1
Just had a chat with a Pearson Vue customer service agent.It ended up that if i'm a no-English native speaker but i live in a English speaking country i'm not allowed for the extra 30 minutes: "Thanks again for waiting, unfortunately since English is an official language in Ireland, you will not be able to receive this…
-
200-355
What equipment do you need to pass this exam?
-
How to use TFTP for my Cisco lab?
Hi! I wanted to know how to download and use TFTP for my Cisco switches. The book I have really doesn't go into detail on how to actually install such a program on your computer. Thanks so much for the help!
-
Video Conference over Call Manager Express
Hi guys. Just want to ask if it's possible to implement video over Call Manager Express to support video conference on 9XXX series IP Phones. Thank you.
-
practice exam question on root bridge ?
Hi yesterday did practice exam for semester 3 and this question came up,hope image shows up,but basically what got me was the way arrows were positioned and question asked which ports are what,so looking at chart based on arrows-they are same as per exam,thus my answer was alternate,designated,designated,root.But of course…
-
Should I invest in another sw for STP ?
Hey all, I currently have 2 layer 3 3650s sw's for my lab at home, but I'm contemplating picking up a 3rd for STP labbin. I would actully be looking at a layer 3 that is smaller (possibly fanless) for using as my home device after I'm done with the main lab. If not just for STP is it worth picking up a 3rd sw for CCNA, and…
-
What is the passing score for CCENT?
It is out of 1000? What is passing 750? Thanks
-
3550
Will the 3550 last me a good amount of time or should I buy the 3560 or 3750 instead? 3550's are way cheaper and I want something that I won't have to turn and throw away in a year or two. Thanks
-
200-120 good practice exam?
Something affordable? I've already sunk enough money into books and videos that I could fail the test several times over. So something affordable. Boson is a little too rich for my blood. There's one that comes with the Lammle book. Is it pretty good?
-
Giving up on CCNA Security
I think I've spent just over four months trying to study for CCNA Security but it just isn't sticking for me. I scored just about 70% on all the Boson exams which is well below what I would need to pass the actual test. I'm not sure what else I could have done to pick up the material since I went through the book, did CBT…
-
OSPF Adjacency Process?
Hi, I understand the process that is gone through for routers configured with OSPF to become neighbors, but I don't quite understand what determines whether they progress from that and form an adjacency? thus exchanging OSPF database information. Is it only DR's and BDR's that form adjacencies?
-
ICND1 Exam - Router simulators
Hi, I am currently studying for my ICND1 exam using a todd lammle textbook and cisco packet tracer simulator. I have around 3 weeks until my exam, I know most of my theory and at the moment I'm just going over different labs to make sure i can configure rip/ospf etc. I was wondering what I can expect from the router and…
-
Question about study method?
I'd like to start studying for the CCENT and I will be relying on the Wendell Odom book. For my CompTIA exams, I would read and take notes along the way but for the CCENT, I noticed the book is huge and if I take notes while reading, that would take a long, long time. Would you recommend just reading the book through…
-
Management VLAN
Hello there I'm studying for my CCNA exam using Wendell Odom's official Cisco cert guide. In chapter 8, VLANs are introduced. However, the concept of VLANs is clear to me, I do not understand what the writer of this book is trying to explain in the following paragraph: He says a typical Layer 2 LAN switch can use only one…
-
CCNA Cloud vs CCENT
Hi all: I'm starting down the CCNA Wireless and/or CCNA Security path. I'm wondering if a CCNA-Cloud which has no pre req's would count as the pre-req for the CCNA wireless/security? My thought was it might be smarter to obtain CCNA-Cloud if that would count towards CCNA-Wireless and Security rather than bother with CCENT,…
-
Need IPV6 HelP
I am having a hard time understanding IV6 address. I'm so use to IPv4 and on my last test I had a few IPV6 questions that I know I got wrong. I'm trying to understand how IPV6 works in the real world. I am reading chapter 26 of Wendel Odem's Official cert guide and I am trying to get this down. So if I am reading page 723…
-
How to practice IDS/IPS?
Hello, I have an home lab with 3 1841's, 2 2950's and one ASA 5510. I want to know how can I practice IDS/IPS subject without having the signature files... Is there any way to do so? Aren't there any sample files free for download for this purpose? Any ideas? Thanks!
-
Passed icnd 1
So I have had this cert before but I didn't take ICND 2 before it expired. I just recertified today I got something like 903 / 1000. What I did: I went through the lecture series on CBTnuggets. I also went through there test review. I used the practice exams available with the CISCOpress book (odom) I had quite a bit of…
-
Passed my CCNA 200-120 today!
Just passed with an 849! Passing was 825! Didn't think I was going to make it! That said, I used Laz's course on Udemy, CBT Nuggets, Official Cert Guides and the Exam Cram books. I also used the following sites to lab: Free Cisco Catalyst Switch Lab and CCNA Routing & Switching Lab Workbook | Free CCNA Workbook This site…
-
How do I find valid host addresses with a subnet mask?
I have a problem with the following question. Assuming a subnet mask of 255.255.224.0, which of the following would be valid host addresses? A. 124.78.103.0 B. 125.67.32.0 C. 125.78.160.0 D. 126.78.48.0 E. 176.55.96.0 F. 186.211.100.0 The answers are A,D and F. I dont know how to get the answers. Does anyone have an idea?…
-
CCNA Interview questions - how to answer this?
Hi, I did interview with Cisco for internship. I got asked the following questions. I was wondering if you guys can able to help me how to answer this questions. 1) You have this topology.You have PC 10 which you are patching to switch. However when you connect Ethernet cable, PC10 doesn't connect to switch (ping doesnt…
-
How to legitimately obtain Packet Tracer directly from Cisco (details inside!)
I know people usually want to obtain Packet Tracer but since you have had to have a Cisco Netacad login to do so, and you could only obtain a login by signing up for a Netacad course through an authorized provider, people resorted to downloading elsewhere on the internets. Well today I saw a tweet from Cisco Netacad with a…
-
struggle with motivation and drive
Hi guys, I am a desktop support engineer, i have had past exposure to vsat engineering and cisco and have a masters degree in software tech with network management, however i have not done any major studying since 2011(graduation) i really want to get a Cisco networking role and i want to get the ccent and ccna. not just…
-
Is it possible to configure a failover between a cisco ASA 5512 and ASA 5510?
I have a cisco ASA 5510. I now also have a ASA 5512. I would like to first, copy the config onto my 5512 from my 5510 and make my 5512 the primary. Then make my 5510 the secondary, my failover. Is this possible to do, between these 2 models?
-
Commands to memorize for 200-120?
I'm taking the 200-120 next month. I've seen several posts that mention "better know your commands" and "make sure you have the commands memorized".. Well which commands are these exactly? The show commands? Would a resource like this be helpful, or is there more or less I should be memorizing?…
-
ICDN2 - 200-101 - Study Materials
Hi All, Just wanting to confirm which book you recommend for this exam? I've seen many posts going for Odom: http://www.amazon.com/Routing-Switching-ICND2-200-101-Official-ebook/dp/B00C68XS08/ref=sr_1_2?s=digital-text&ie=UTF8&qid=1459250297&sr=1-2&keywords=cisco+200-101 But also have seen the following book: CCNA Routing…
-
PEAP and certificates in server 2012
I'm in the middle of using an NPS server in server 2012 to implement NAP on my network, I've just installed a CA on my DC and i plan on using the PEAP with certificates to use as the authentication method that my users are going to use to authenticate themselves. Regarding PEAP with EAP-MS-CHAP v2 and EAP-TLS, i'm kind of…
-
ICND2 study materials
Hello All, I know this post is probably somewhere in the depths of this forum, but figure I may resurface it. When I studied for my CCENT I used the following: CBT nuggets(ICND1), Odom cert guide(ICND1), and I used Boson Ex-Sim (ICND1). All of this was really great and I love CBTnuggets, Jeremy does a great job keeping it…
-
DLCI - Tell me why i am wrong
So I have a question on a mock ICND 2 exam about DLCI Basic setup is as follows Router A has 2 DLCI's, 100 and 101 Router B has DLCI's but numbers are not shown Router C has 1 DLCI 100 All routers are connected to frame relay switches which no config is shown. For all routers no configuration is shown. On this basis the…
-
practicing show commands and troubleshooting
So i took the ICND1 and i failed, the part of the test i failed on required me to use show commands and troubleshoot a network. Does anyone have any resources i can use that i can help me.
-
Summarization Example Help!
we have 5 networks 172.1.4.128/25 172.1.7.0/24 172.1.6.0/24 172.1.5.0/24 172.1.4.0/25 How do you find the interesting octet here? In my book it says the third, however there is two network which is the 172.1.4.128/25 and 172.1.4.0/25 what about those one? I know that the other three are in the third octet but not that one…
-
Deploying 2 9706 Directors in HP enclosure environment, need some planning advice
Hi, Just wanted to get the ball rolling, i am upgrading our current pair of Cisco 9222's to MDS 9706's. We have 3 EMC SAN's and 6 HP 7000 enclosures. Is it a best practice to give each enclosure its own vsan? Thats the way i think i want to do it.
-
Taking CCENT on Tuesday
Hi guys, I'm going to be taking my CCENT on Tuesday and I was just wondering if anyone had any general pointers or specific things to be aware of particularly if you've taken the test recently. I'm feeling pretty confident of where I'm at but I know the test isn't going to be easy. I think my main weakness is exact memory…
-
Question about Summarization
Heres an example. Address 192.168.144.0/20 so whats the range of host address that would be forwarded according to this summary? /20 is 255.255.240.0 Third octet is block size of 16. And the starting summary is 144, the next block of 16 is 160. so the network summary range is 144-159 in the third octet. I am trying to…
-
Can anyone explain network and broadcast adress
Can anyone explain what would be the network, hosts & broadcasts addresses for below: Address: 10.149.18.171 Subnet Mask: 255.255.254.0
-
Nexus family product line
HI All in regard to the first exam (640 911) and the second exam (640 916) just wondering if people had bothered to learn the whole product line off by heart, and i mean every single attribute of every switch and line card discussed in the cisco official cert guide for 640 916.
-
LAN and WAN
Hi, Can you tell me what is - LAN to LAN - LAN to WAN - WAN to WAN - WAN to LAN *If got any video, kindly provide the link.
-
VTY user disconnected?
This is a question from Boson that I don't understand even after reading their explanation. Hoping someone can help. The following commands are run on a cisco router: privilege exec level 10 show users username boson password cisco username boson privilege 15 username boson autocommand show users line vty 0 4 login local…
-
Trouble with VLSM questions...
You are issued address 123.123.0.0/16. Note this is the correct public address, correctly allocated, not a misprint. a)Using VLSM Provide a table listing: i)Each additional sub-network address only for the subnets identified in figure 1 ii)The range of hosts for each subnet identified iii)The broadcast address for each…
-
Passed ICND2!
Just passed the ICND2! I ended up with a score of 846. I am beyond ecstatic since this was my 1st attempt and my studying has been inconsistent the last several weeks. But, the amount of time I did get to study I made sure I attacked the exam topics like a lion eating its final meal. There were a lot of nights of 2-3hrs of…
-
COMEBACK...which book for 200-120 ?
Hi yall, Im picking studying back up after my ccna/ccnp expired years ago, still working in the business currently as 3th line engineer. Im wondering which book you guys recommend to get ready for the exam ? 200-120 I see so many versions and authors that i dont know what to take. Any recommendations and or reasons why I…
-
linux terminal emulator
What are you guys using for a terminal emulator on linux? Thanks
-
Cheap Nexus Switch
Is there such a thing? I looked up one that was shown in the DCICN OCG (5548 ) on eBay and it was $3,000. I would like to add one or two to my lab if I can find some that aren't too expensive as Nexus skills seem to be in demand right now. I tried installing the Nexus 1000V to play with, but only managed to get the VSM…
-
Bought a CCNA Lab and...
Hey! Very long time lurker. First time poster. You guys were irreplaceable when it came to passing the N10-006 test. I learned from you guys which resources to use, and test taking practices, and a whole bunch of other things. Especially the importance of subnetting. I can do almost everything in my head within a few…
-
CCNA DATACenter Starting off.
Hi All, Well here i go... starting to process of Studying for the CCNA DC Study Material PluralSight Cisco CCNA Data Center: Intro to Data Center Networking / Nexus, Advanced Switching & SAN / UCS & Network Services CBT Nuggets 911 & 916 Videos INE BootCamp CCNA DC finally watching over the IP Expert Videos "If Someone in…
-
Blocking SSH with access lists
Hi, I am playing around with ssh and trying to disable it via an access list on the vty line. I have a PC, switch and router connected as follows: PC1 (10.1.1.100)SW1 (10.1.1.11)(10.1.1.1) R1 SW1 has ssh enabled: line vty 0 4 login local transport input ssh line vty 5 15 login local transport input ssh and I can ssh from…
-
about career paths
Hey guys, i hope i'm not posting this in the wrong section. I just got couple of questions. so i got ccna s&r. already, and i'm deciding which path should i follow now, i'm interested on security and design. As i see both paths look promising but i would love to have some of your opinions too. because as far as i been…
-
How to pass CCNA?
Can I pass this exam with only having a couple CompTIA certs? Does this require experience or can I pass the exam with my limited knowledge and zero IT background? Which books do you recommend, which authors? Can I go straight for the CCNA or is it recommended to do CCENT like doing Network+ before Security+ for CompTIA?…
-
Scheduling the exam?
Hey guys, I need your input on scheduling my exam. I'm about to start studying for the CCENT and my plan is to start reading Wendell Odom's book and take notes as well as some labs and sims. Once, I get a good feel for how fast or should I say slow lol I am preogressing through the book, then I will schedule the exam. When…
-
hitting around 60% on netacad exams 3 months left ?
Anyway have been moaning on this forum basically since joined :) also got great help from people wolfkhat :) and others on many questions that i had.But time flies,i always was into IT more pc computers in general troubleshooting making my own rigs and solving any hardware software issues since being kid,so CCNA was…
-
Failed ICND-2 - moving forward!
Hey everyone, I took the ICND-2 exam today, and failed with a score of 749. I passed ICND-1 on the first try, so I was feeling confidant, and I thought I had everything well-studied for ICND-2, but apparently not! ;) here are my test stats: LAN Switching Technologies - 82% IP Routing Technologies - 71% IP Services - 0%…
-
Net+
I thought the network+ was vendor neutral? If the objectives require to configure something wouldn't we have to know cisco or juniper, etc.? Wouldn't that negate the vendor neutral?
-
UPNP question?
When UPnP is enabled on my home router is that just a kind of "approval" that UPnP services can rub if selected on the computer or game console for example: If I have a game console that needs certain ports to run online, having UPnP enabled on the router will enable these ports to be opened and forwarded to the device…
-
ccna study time?
I know this may have been posted before but I did a quick search and didn't find many posts. So, my question is for those of you that have recently passed the ccna exam, how long did were you studying for before you took the exam? I just passed the Netplus exam the other week and I studied a month straight for that. I used…
-
CBT Nuggets - CCNA Security
If anyone is interested, CBT Nuggets has the CCNA Security 210-260 IIS on their site now. They claim 1 week free trial, cancel before the week is over before they charge you $99. If you want to that is: https://www.cbtnuggets.com/it-training/cisco-ccna-security-210-260
-
Current use of dhcp on an access level router?
One of my CCNA training videos just did a section on using DHCP, and putting it on an access layer router. The entire lab was an 1841 configured as router on a stick, to a 2960 core switch with 3 vlans with trunked ports, out to 3 other 2960 switches, getting their vlan info from the core switch in client mode, which fed 3…
-
Confused on FR DLCI Mapping Question
The confusion level in my brain for frame-relay PVC statuses is starting to climb higher and higher. I'm reviewing Boson right now and was presented with the following question: ...see attachment --Yes, my selected answer "D" was a bit off and a was more of a random guess because I thought for sure "B" was ruled out. The…
-
Any practical use of etherchannel these days?
I'm going through some of my CCNA training videos, and there was a brief section on etherchannel. It was interesting to see how it was done, but it seems like any decent layer 3 switch with even a basic fiber connection or gigabit ethernet port could do it better and with less fuss. Maybe on an old network switch with…
-
Boson network sims.
Has anybody ever tried this software? Was think of trying to use it if i get this new job where i will need to get my CCNA. Cisco Network Simulator | IT Practice Exams | IT Training | Boson.com
-
Subnetting Questions
For the 200-120, I have heard the Subnetting questions are more or less hidden in other questions, instead of directly asking "which subnet does host x belong" etc. Can someone elaborate a bit more? I'm not looking for exact questions from the test, but an example of how they can be "hidden" would be very helpful.
-
How do you guys mix videos with book studying?
Studying for ICND1 and ICND2 . I have the books but i also purchased videos from INE website to help me learn( I'm a visual learner) . I would you mix these 2 studying materials? Should i finish the videos first then read the book or what?
-
default gateway FHRP
In a switched network, each client receives only one default gateway. There is no way to use a secondary gateway, even if a second path exists to carry packets off the local segment. can someone shed light on sentence above,since other day in class i was told that is possible to set multiple gateways on host pc.yet…
-
please explain answer to question about subnetting
Hi Folks, In an official cisco cert. guide there is a review question about subnetting that I don't really understand. Answer a. seemed to me the best answer, followed by b., but the book says these are wrong. What are the two workable solutions and especially why? 3. A Class B network needs to be subnetted such that it…
-
1852i question? Anyone know
I was looking at that new 1852i's, they have the region designations I believe -B is the US one. But does anyone know if these automatically come with Express on them, and you have option to use that or the controller. I seen a demo on techwise, they said they had 1850's, they showed id it was 1852i-A, which I think is for…
-
Just checking default action of a router when getting ip address from dhcp
Help peoples. I am just checking. Say I have Pca Connected to a Router A. This router is connected to a Router C. Both Router B and C are connected to A in a triangle formation. Router B is connected to a DHCP server. Now if PCA is wanting to get an IP address from dhcp. is the default action of Router A to send a…
-
Cisco Routers and Serial Interfaces/Connections
I see network diagrams all the time that show routers connected using serial interfaces and I have some questions. When you see a network diagram like the following: Does the diagram mean that the routers are connected using a RS232 cable or a V.35 cable or something? Wouldn't that be terribly slow? Does a "serial…
-
Can you expain summarization?
Hello! I have Todd Lammles book for study material. I understand how to subnet and I understand VSLM. What I am having trouble with is summarization. I understand that its used to just to summarize a bunch of networks to ease router memory. I get the gist of what its meant to do; but the book words it in a way where I…
-
Cisco 2503 vs 2514 router
So I have two 2950 switches and I'm looking to get a router. Should I get a 2503 or a 2514 router, what are the differences?
-
[passed ICND1] thanks all
Hello guys, Passed the exam (887/1000) Thanks to clarson for helping me about my lab a while ago Thanks to all of you for your questions/anwser on the forum, helped me a lot through my certification journey. Very inspiring On my way for ICND2
-
subnet router anycast address clarification
I'm unclear on subnet router anycast address in IPv6. Is it the same thing as the subnet ID in IP4? IPv6: 2001:0DB8:1111:0000:: from 2001:0DB8:1111::/48 IPv4: 192.168.1.0/24 Thanks
-
Pass ICND 1
Good morning, I wanted to report that I passed my ICND1 test yesterday with a 855. I did very well on all areas's except "operation of IP data networks". I'll post % when I have my report! Now taking a week off and then I'm diving into ICND2! Thanks for all of the good resources on this site!!!!
-
Packet tracer switch lab help
I am studying for Ccna and am half way through the 21 chapter book. I am able to configure two hosts to a router and ping but can't seem to set up a similar simple network using a switch instead of a router. Can someone please help me? Also I can't find much on YouTube in terms of packet tracer. Any suggestions? Thanks Fam
-
CCDA/CCDP for a service provider broadband engineer
Hey Guys, I was wondering is there any point in obtaining these certs? As I currently work in the service provider area dealing with access networks for GPON, configuring stuff like BRAS,OLT multicast streamers and TV encoders. I don`t think ill ever work in the enterprise world since I am more a SP guy, we have MPLS…