-
Basic ASA configuration
Hi all, I'm trying to get an SSL-VPN up on an ASA, I know how to do this configuration but I can't figure out how to get the ASA to work 'correctly'. Never used this platform before. Image to help. (where it says public IP, that should also say G 0/0 and not on the switch). So I have the management interface configured…
-
r1 CANNOT SEND PACKETS TO r3?????
unable to route RI----R2R3 as R1 cannot sent packets to R3 nd vice versa... but R2 can send to both. I m just a begginer.
-
200-101 ICND2 Scheduled for Next Monday
Hey Guys, Just booked in to sit the new ICND2 exam (200-101) next Monday; The main resource I have been using is the Cisco CCNA Routing and Switching ICND2 200-101 Offical Cert Guide by Wendell Odom. I also plan to go over the CBT nugget videos for 200-101. I've also had some past experience studying the old material for…
-
Cisco IOS problem
OK so this is what's going. I was playing around with an old switch at work. I wanted to update the IOS in it but there wasn't enough space left so I overwrote the the bin file in the flash (deleted it actually). I was now transfering the file to the switch (Catalyst 2900XL) using Xmodem but in the end it says:…
-
Remove Dialer Profile First - EHWIC-4G-LTE
Hello everyone! I am running into an issue, which I have seen before, and have solved before, however I cannot rememeber how I did it. I have a 2921 with a EHWIC-4G-LTE. I have a few of the 2921's with 4G LTE EHWICS in the field. My working configuration is: ! service tcp-keepalives-in service tcp-keepalives-out !…
-
Subnetting - Impending aneurysm..
Afternoon, Not sure if this is in the incorrect place, I was only able to post in a few places so excuse me if it is. I am approaching completion of the CBT Nuggets ICND1 (new) course material and hoping to take my 100-101 exam next month. Through that material I have picked up some subnetting and I am able to create…
-
Things not covered by CCNA Exploration v4 on the new exam?
Hello all, I just finished taking up a Cisco CCNA class. The course started back in early of this year and we used the CCNA Exploration v4 for the whole course (started with exploration 1 all the way up to exploration 4). Im planning to take up the exams 100-101 and the 200-101 (two-test track) within 1st quarter of 2014,…
-
Going to ebay my lab probably
So with some changes and etc. with my employer, I am no longer going down the networking route and will likely be ebaying the lab I had pieced together. Should I sell separate or as a bundle, and if a bundle how much should I expect to get? 1721 router and 1760 routers with 1 WIC T1 CSU/DSU 1 2950 switch 2 3550 switches…
-
Topology CCNA
Hi guys, I'm new here and this is my first question (of many :) )... I bought this lab from a guy that gave up on his certification process... I paid 800 dollares for it. Let me know if it was to much... Skeletek c28u (rack) American Dj PC-100A On/Off switch 1 X 2611XM (1xWic 1DSU 56k, 1xWic 1T1 1 x 2620XM (1xWic 1B-U V2,…
-
One way audio with FXS and STCAPP
Hello everyone, I hope maybe someone can help me out. I have a cordless phone connected to my 3725 on FXS port 1/1/1. System image file is "slot0:c3725-adventerprisek9-mz.124-12.bin" PROBLEM: I call my cordless from my cell. Cellphone can hear voice, but callee on the cordless phone can not hear anything. What could be the…
-
ROAS L2 Switch DG
3 VLANs (2,5,10) Defined on switch and subinterfaces on router. VLAN 2 native VLAN is applied on the physical int on the router, and is the only SVI up on the switch. I have 2 PCs connected to the layer 2 switch, each in their own vlan (5+10 respectively). I have set the DG of the switch to the IP of the physical interface…
-
Passed ICND2!!!!
Passed today with 958/1000, was a little nervous going in to it. Spent a good two months preparing for it, used Paul Browning's CCNA in 60 days and Lammle's book.
-
Lab Topology/Equipment
Will the following be sufficient for CCNA: Security or do I need an additional router (I have a 2801 - among others - I could add).
-
new to cisco, locked out of my own switch
So i just started with cisco trying to get my ccent then my ccna. I was following cbt nuggets with setting a password and i managed to lock myself out. No idea how. Here's what I typed: MMLP2#conf tEnter configuration commands, one per line. End with CNTL/Z.MMLP2(config)#line console 0MMLP2(config-line)#password…
-
Any last tips
I'm a little bit more nervous about this exam compared to any of my other exams. I just haven't really messed around too much with ASA's or CCP at work. I get the basics of it, just haven't gone hardcore into studying. Any final things I should go over?
-
CCNA & CCENT Home Lab Ideas
Because it's such a common topic on this board and something I'm reading up on myself, here's a really nice (and recent!) series of blog posts discussing what to get for your home study lab. http://www.networkworld.com/community/node/24916
-
CUCM 7.0 Admin recovery?
Good day to all......forgive me if this has been asked,but I was unsuccessful in the forum search...my lab partner setup cucm 7.0 on a vmworkstation and he's created a "dill of a pickle"....Is there ANY way to recover the ADMINISTRATIVE USERNAME?(not the password) It seemed that "someone" thought Admin was what they…
-
2651XM PSTN Multiple T1 PRI
Hello all. I am trying to set up a 2651XM as a PSTN router and I am having a bit of trouble deciding whether this will be possible or if I need to sell this router off and purchase either a 3725/45 (or even 2801/11/21) to do the job. I have a NM-HDV with 2 banks populated with DSP resources. In this NM-HDV I have a…
-
Any new certification holders not receive an email yet?
I passed on the morning of the 30th, however, I have yet to receive an email congratulating me or providing an authorization code to log into the cert tracking site (I already have a cisco.com ID and CSCO#). When I use the option that asks for my first and last name and registration ID from my score report, I get nothing…
-
Lab
[h=1]I study for ccna security and I try to find out what should I expect as a practical part vpn ssl Please help me [/h]
-
My Cisco Lab. :)
The Cabinet the equipment: The blue light is from the PowerEdge R200 server. Running Windows 2008 R2. (CUCM 8.6 running as VM) spec: 2 core 3.00ghz Xeon, 4GB RAM primary OS drive 250GB and a 500GB SAS drive for storage. Cisco 2651xm router Cisco Catalyst 2950-24 port Switch Cisco Catalyst 3524XL-PWR Switch Cisco 1760…
-
what are the basic certification to be learned or taken for starting a career in n/w?
I am a b.tech fresher in ECE and have good interest in networking , so as a fresher what are the certification that i would take initially to have a good exposure in this field and also to have a good knowledge in networking as a fresher for entering into a job in networking platform....i have a plan for a course of about…
-
2620XM Router 2FE 2W
I have been googling non-stop to figure this one out and I can get no definitive answer. I see people say that its not compatible and according to what I have found at one point that was true. Cisco documentation expresses that this hardware is compatible with 12.2( T firmware. I have tried to get this sucker to work, but…
-
Online Self Study - No sims/kit and lots of £££
So I managed to convince work to put me through ICND1 + 2, there were a few providers out there offering online courses. I opted for one without doing too much research, mainly because there wasn't that much info out there about online self study courses when it came to Cisco stuff! It did cost a fair whack of money but…
-
WAN Technologies (HDLC vs PPP etc)
While I know that HDLC, PPP, and Frame-Relay are all protocols used for WAN encapsulation, I'm a little unclear on whether they are exclusively used on (designed for?) serial interfaces. Which brings up another question: If I used a FastEthernet interface to connect to the WAN instead of a serial interface, what are the…
-
Odom's network simulator
Odom will release a new version nework simulator for new CCNA. Is anybody recommending it? I have not ever used any Odom's books. Should I buy a book to learn using the network simulator?
-
Help with Cisco Packet Tracer
I am setting up the network in figure 8.9. CCNA Routing and Switching Study Guide: Exams 100-101, 200-101, and 200-120 - Todd Lammle - Google Books I configured two 2811 Routers with serial interfaces, and set them up as described in the book. The issue that I am running into is that Corp int s0/0/0 172.168.10.1/30 SF int…
-
JRP's CCNA Security Training log
I don't really see anyone creating threads based on their CCNA level training. So I decided to try one out. I hope it will keep me honest, and on good pace. Since I've started the semester cert training has dropped in intensity. Ok. So what am I using to study ? simple CCNA Security OCG Chris Bryant Udemy training videos…
-
Any reason to know old CCNA material?
I have the books for the older 640-8xx CCNA exams. I got side tracked and never finished before the transition to the new x01-101 CCNA exams. About to order the Odom books for the new version (probably later on today.), but just wondering - some material from the old exam didn't make it onto the new version. Are there any…
-
Have CCNA, don't want to lose the skill sets
Before you read below, I am editing the post for a simple reason. I have received a lot of great/helpful advice from many people below on what I should do to get a job in the field...and I am grateful. But getting back to the question I am asking about. I appreciate the forums resources, and I am looking for other labs,…
-
CCENT Exam ICND 100-101 EXAM HELP!!!!
I have a lot of study materials, however they all offer different styles and I want to use the one closely related to the actual exam. For one, I have the previous 640-816/822 CD and installed the Pearson IT PRactice Test, however they seem way to long and complex to fit in the given time frame of the exam. I also have…
-
How to find the subnets?
Here is the question and answer I can get the hosts no problem 2^10 -2 1022 not to bad :D . Now to find the subnets I don't remember how to do it. I tried to read the guides on here, but for some reason I still just don't get it. If some one could just do a quick run through of how to find them that would be greatly…
-
Route summarization practice
I'm wondering if anyone knows of any websites that have some route summarization problems? I found a few websites when I was learning subnetting that had randomly generated questions that was very helpful practice. Is anyone aware of anything similar for route summarization?
-
Question regarding studying
I just started studying for CCNA test, got sidetracked because of new position at work, but I just realized I've been reading this book after I got a lil more than half way.............. CCENT/CCNA ICND 1 / and ICND 2 - ciscopress by Wendell Odom. For the CCNA 640-802 exam. Now I know this is the old exam, and the new one…
-
detecting use of WIRESHARK on network?
i am currently learning how to use wireshark, i use it at home alot but i have lots of free time at work, all i do is build images for desktop rollouts, and i plan on going into network/security at one point in my career, first networking then later specializez in network/security, i often run wireshark at work to learn…
-
ICND2 - ACL Inside & Outside interfaces?
Morning, i'm currently studying this topic ( I know its not on the 200-101) but i'm curious to know if anyone get confused working out what the IN or OUT interfaces would be? I get the idea but was thinking if the network is huge then this would definitely become confusing for me. Do you follow a method to work this out?…
-
Physical Tools of the Trade
Holding a few networking certs and in the process of looking for work. I'm looking to assemble a list of physical tools a professional should have in the networking field, along the CCNA and N+ level. I'll need a USB to serial converter to connect to rollover cables that works with windows7 because the two I have from…
-
Question about CCNP
Hey guys, I just earned my CCNA in september, and Im planning to move to CCNP. Im looking forward to start with SWITCH. Have you heard if, as it happened to CCNA, CCNP will go through any changes soon? Just so I get my books asap...LOL. Thanks in advance!
-
Training differences
So i've started using resources for my CCNA Security study, CBT Nuggets, as well as the OCG kindle and book. I've noticed that for some reason, the CBT Nuggets seems to jump right into configuration, whereas the first few chapters of the OCG are dedicated to policy. I figure its as simple as testability, You are more…
-
LAN/WAN Issue
Hi Still haven't been able to sort this issue out.. I have the following Packet Tracer topology: http://oi42.tinypic.com/nn44tg.jpg The whole LAN network works perfectly, i have 4 different subnets configured and all of them are able to ping eachother across the Layer 3 switch. My issue is how do i connect the LAN to the…
-
Just registered to TechExams (and need help on sim)
Hello all! just registered to Techexams I've always reading posts and gain information from threads Thanks to all =) I am now moving on to ICND1 and 2 was looking for study materials, and found out i might need a sim I am currently using my macbook air for study and found out simulations might not work on OSX. Anyone knows…
-
Layer 3 switching Help!
Hello My hair is turning grey from learning layer 3 switching.. I really can't figure out how to make all vlans on all switches able to ping each other through a layer 3 switch.. So ive got a layer 3 switch in the center of my network. In the layer 3 switch ive got two L2 switches connected with trunk lines. All three…
-
The journey begins...
So, I finally cracked the ICND1 book by Wendell Odom... First thoughts, oh my... there is a lot of material for me to cover in this book. Now, I just have to figure out how to keep myself motivated to read all of it. Any suggestions? I really only have the weekend to study, as my work schedule keeps me pretty busy during…
-
Subnet with VLSM
Afternoon everyone, Trying to wrap my head around subnetting and VLSM. Network 192.168.10.0 3 p2p links 1 lan with 28 hosts 2 lans with 12 hosts 1 lan with 60 hosts So after subnetting for the 3 p2p links I get, Network address 192.168.10.1 Hosts .2-.7 Broadcast .8 Mask 255.255.255.248 So, hoping that's correct so far,…
-
how to study using chris bryant ccna Study Package ?
hey guys, I wonder how people who are preparing for their ccna or ccnp using chris bryant materials ? specially the videos i mean he's basically reading what's on the pdfs ,so i thought that it would be better to watch the video once and then read the pdf as many as i want and maybe take notes of what videos he's labbing…
-
CCNA and CCNA Voice Lab
Hello everyone. Here is list of my equipment, not much but its enough. I want to use it for my home network too but not sure if it will work out. Cisco 2620 XM router (Single Ethernet Interface) with 4FXO vic and POTS line Cisco 2650 switch 7950 IP Phone Comcast Cable Would I be able to use 2620xm with a single Ethernet…
-
Collision Domains vs. Broadcast Domains
I understand the difference between Collision Domains & Broadcast Domains, my problem is that I can't figure out how to count them in a network. Would someone please post a diagram and illustrate in details the best way to count them!!! : Thanks in advance.
-
I Found the Net+ to be more difficult than the ICND1
Ive noticed a lot of people brush the Network+ cert off. But after taking the ICND1, I found the Net+ to be much harder. Other than subnetting, the Net+ covered a lot more material. However it could just be because when I took the Net+ I was less experienced... Good luck to anyone taking the new exam, I found it very easy.
-
ACL on a Layer 2 switch?
I can't really seem to figure out why i can not configure ACL on a layer 2 switch in packet tracer? I'm using a Catalyst 2960. I'm able to create the actual ACL on the switch, but it does not recognize the command when i attempt to group it to an ethernet interface using ip access-group. It won't even recognize the command…
-
Wendell Odom subnetting (101)
His method for calculating the size of the network, subnet and host parts of the address (example below): 8.1.4.5 Find the DDN = /23 Network part = 8 as class A Subnet part = 23-8 = 15 Host part = 32-23 = 9 Total hosts = 2^9 -2 = 510 Total subnets = 2^15 = 32,768 How ON EARTH am I supposed to calculate all that…
-
New TCP/IP model that maps to OSI model
Watching the new 100-101 ICND1 videos from Chris Bryant and found this tid bit very helpful. The TCP/IP model has been updated and to me it maps better to the OSI model then it did before. See the Example below. TCP/IP OSI model Application Application 7 Application Presentation 6 Application Session 5 Transport Transport…
-
100-101 CCENT Exam Topic Question
I am looking over the new 100-101 exam topic PDF for what will be on the CCENT test. I was looking at it and I did not see ISL mentioned in the PDF. I realize that 802.1q is the newer standard and ISL is not supported on newer switches. But am i correct in assuming ISL is not going to be a test subject ? In addition please…
-
New CCNA books came today for both Odem and Lammle
Hey guys, I bought Wendell Odoem's Routeing and Switching Official Cert Library 100-101 and 200-101. In addition I bought Tood Lammle's CCENT book. I am starting the process of building new notes guides ect to study off of. Most of my notes I made in Excel are still good I just have to tweak them a bit. Has anyone used…
-
Infinite Skills CCNA on Udemy
Any opinions on this CCNA training? There's 157 videos total, and each is 3-8 minutes long. This training so far for me is VERY easy to follow and digest. Just wondering if this training as thorough as CBT Nuggets and others out there? Thx!
-
ICND2 question
Hello, I just took the ICND2 test yesterday and failed, but I passed the ICND1 last month. My question is if I take the new ICND2 200-101 and pass, would I still become CCNA certified ? Also what would be a good a good study guide with videos ? Thanks.
-
Going back to CCNA
So I never knocked out any Cisco certs...but I've worked a lot with Cisco technologies. I'd like to hit CCNA and CCNA-Sec. For someone who has worked with Cisco for years, what is a good fast-track study guide to kill this exam?
-
CCNA Question
Hi Guys, I'm currently preparing for my CCNA and i was just wondering for the people that have done the ccna how long did it take you to achieve it while working full-time? Regards,
-
Router configuration in GNS3 VS real world
When i have an isolated router in GNS3 (nothing plug to it), if the interface has been turn on administratively turned on (no shut), so i can see that the status (layer1) is up. Is it supposed to be like that ? What will happen with a real router if no cable connect to that router or that the cable was damaged ? Is the…
-
Boson any good?
Hey, I'm just learning the bridging materials for the new CCNA Routing & Switching exam and I was wondering if the Boson network simulator kit for CCNA is worth the money? Anybody used it and can give some advice? Thank you, Vlad
-
Time of Day Routing - CME
Hi All, I have a requirement for the following - An extension to only be forwarded to VM during non working hours. During working hours, there has to be no divert to VM. I have setup night-service hours under telephony service and understand I can put this under the DN and point to the VM number for non working hours.…
-
Skeletek Rack's in Canada?
Anyone know of any stores that sell these in Canada? They want $95 for shipping. Pretty much the same price as the rack!
-
ccna voice equipment requirements ?
Hello, I know this topic will be answered elsewhere, but to save me a lot of time reading conflicting /out of date posts etc. can someone please give me a quick list of what hardware/software is required (if any) to study for and pass CCNA Voice ? I intend to carry on with CCNP after Voice. Thanks kindly.
-
Hardware Desktop Laptop Troubleshooting skills
Hi all, Do I require good knowledge of Hardware Network Troubleshooting skills after passing CCNA for getting an initial job? I see most people in India telling me that I need to be sound in Hardware and Network Troubleshooting. Then what is the use of passing CCNA and then again you have to do an A+, N+ and Microsoft…
-
CCNA achieved!
Cutting it close to the deadline, I passed 640-802. Finally CCNA.
-
CCENT Passed! Thanks TechExams!
I just wanted to stop by and say thank you to the entire TechExams community for all of the support and advice that aided me in passing my ICND1 yesterday! I'm incredibly happy to have cleared this first exam and look forward to continuing my journey in IT! Currently, I'm enrolled in the VCP course at Stanly CC and hope to…
-
Quick-Q for the CCNA.
Does Cisco give partial credit for labs/multiple choice questions? I'm retaking the new exam today after failing it on the 30th. I was 2 or 3 questions off last time and would like to pass today. Thanks!
-
BEAST Vulnerability?
Ive been reading up on this for quite some time and i still don't quite understand it, wondering if someone can help. So far a brief over view is: BEAST - (Browser Exploit Against SSL/TLS) Vulnerability - Is a exploit which is found in TLS 1.0. Where the injection of plain text packets allows the attacker to decrypt things…
-
port-security and network connectivity problem
Hello everyone, I'm very new to networking and am currently working on my CCNA. I've run into an interesting problem labbing with port-security on a Cisco 3550. I've configured fa 0/31 on one of the switches as follows: switchport mode access switchport port-security maximum 2 switchport port-security mac-address sticky…
-
need to set up a small LAN
I'm not sure if this is the best place to post this. I need to set up a small LAN for the start-up company that I'm working for. I have some Cisco knowledge & I bought a Microsoft Server 2012 book. Someone care to guide me in the right direction as to how to get things started? What type of router will I need? What…
-
Kindly correct my understanding of trunking concept
I have a switch, and I have configured 3 VLANs on it. So, that would be 3 subnets, right? To move data between those subnets I would be trunking. And the switch would be a Layer 3 switch which would route the packets between the three VLAN subets on the same switch. And what happens when VLAN 1 on SW1 wants to communicate…
-
IPv6
Hi Guys, im trying to get my head around ipv6 subnetting but there is no sites out there that have any tutorials or anything like that. does anyone recommend anything resources? thanks.
-
update available for the CCNA Section
Wondering if there would be an update to the CCNA section with all the version 2 stuff.
-
CCNA security
HI everyone I am new in the forum!! I have just pass the ccna exam. And i now start studying for the security I wandering if the UDEMY course can replace the instructor and if really worth it?
-
Voice VLAN and Data VLAN on the same port?
Im studying for CCENT and I was under the impression that you could only configure a port as an access port to a single VLAN or be a trunk port. So Im poking around production switches at work and I noticed thisinterface GigabitEthernet0/1 switchport access vlan 10 switchport mode access switchport voice vlan 2 Also under…
-
Certifications KIT
Has anyone bought an Certification Kit from the company Certifications Kit? See below any info will help.Thanks in advance. http://www.certificationkits.com/
-
Cisco PIX firewalls - on any exams?
So looking over at CCNA Security and CCNP Security, it seems that Cisco PIX firewall is not mentioned anywhere, just the ASA. Are there any exams that cover PIXs at all?
-
Rewording
Rewording
-
RIP metrics
I'm playing with RIP and having trouble understanding metrics. I've built the following lab in GNS3 and sniffed traffic on the Vbox machine. The RIP packet has the correct three networks in it but all have metrics of one. I understand the 10 network having a metric of one but shouldn't 11 have a metric of two and 192 have…
-
Who else did the September 30th 640-8** Hail Mary?
I of course waited until the very last minute to take the ICND2 portion of my CCNA - 2:00PM on September 30th. Thankfully I passed with a 916. I completed ICND1 almost 3 years ago. Did anyone else go for the September 30th test date for ICND1, ICND2, or composite 640-8** exams?
-
CCNA Voice Lab (Virtual)
I am sure this question has already been asked on here but I couldn't find it so I apologize up front if I'm asking a question that's already been asked. I just passed my CCDA exam on Friday which actually provided me with CCDA as well as CCDP since I already passed the ARCH exam to renew my CCNP back in June. So now I'm…
-
Testing Switch Port Security
I have a practice lab in PT. I have a PC connected to the switch on fa0/12 with port security setting of max MAC address 1. The security violation count shows 0 now. What should I do to make a Violation?
-
Is CCNA enough to get a VISA for the US or Canada?
Hi people Basically I have 9 years experience in fixing computers, fully hands on - dismantling the machines, putting back together, virus removals...you name it - pretty basic stuff i know. Now (I'm 25) - I've just started branching out into networking and I'm currently doing my A+ and Network+ which will finish in…
-
Monitoring traffic
Hi I have an issue right now. I am using the Traffic status build in to the ASA to check how much bandwith we are using and I am using advanced IP scanner to see the live host. Now what I want is a tool to check the IP address and check how much bandwith is generating that host. Since sometimes we have bottlenecks in the…
-
Just bought...
My first firewall. Cisco ASA 5505 with the Security Plus license. Paid $400 for it. Can't wait for it to arrive in the mail!!!
-
Ok.. Time to knock out ICND2 200-101
Well I guess its time to transition over to the new stuff. I was curious who else is studying for the ICND2 200-101 now that the old test has expired. My Odom book (Cisco CCNA Routing and Switching ICND2 200-101 Official Cert Guide: Wendell Odom: 9781587143731: Amazon.com: Books ) should arrive on Wednesday and I'm looking…
-
CCENT Passed!
Its official, passed ICND1 640-822 today :D Good exam, confident on most everything. I see there is some sort of review verification process, 3 days of torture I wasnt aware of. I used way too many resources to list, but I think Todd Lammle's CCENT study guide was useful for getting to the digestible point quickly. Whats…
-
Passed 640-802...barely and on the last day....
Hi all, I know I've been posting and talking here and there about my CCNA studies and how I planned to test on the last day, 30 Sep 13...well I thought I'd just share my experience since I've always liked reading this types of posts and they give some insight into the testing experience. I showed up at 1120 to sing in for…
-
ASA-5505 behind a Cisco Router
Hello, after days of struggle, devices connected to the Cisco router finally have access to internet! Now I'm trying to put ASA-5505 behind this Cisco router. Since ASA-5505 also can act as a semi-router/switch, I've been trying to have devices connected to the ASA have access to internet as well. But so far, I have…
-
Cisco discovery course question
I just started taking the Cisco Discovery Networking I class this semester. There is a lot of content but it all seems pretty basic. So I was wondering if anyone who has taken the course could give me an idea of what to expect in Networking II, III and IV. I expect that the first course is more of introduction and that the…
-
VPN and ASA
So for both personal use and 640-554 test, Would a system including one IOS-operated Router and one ASA appliance allow me to build a VPN? And connect it to it using Cisco Easy VPN client? Thanks.
-
Need help big time making internet out of Comcast/AT&T
Hello, I've been CCNA certified for 5 months. Just got a CISCO891-K9 RT and trying to get WAN off ISPs like Comcast Xfinity / AT&T U-Verse. These ISPs provide a modem+router equipment that does both WAN and wireless access point (DHCP as well). I'm trying to feed one of LAN off of ISP routers to my CISCO router as a WAN.…
-
Passed ICND2 before the final bell
Just took the test yesterday and passed. Scored an 888. It was tough. About halfway through I was sitting there thinking there is no way I was passing. Funny thing is that on the break down, I got 100%s on the two areas that I thought I was going to do bad on. Last night I studied nothing. It felt nice. Now on to my next…
-
Better or quicker way to connect to console ports?
Afternoon, Is there a quicker way of connecting to the console ports of the cisco switches/routers? At the moment i'm playing around with the different routing protocols but its a pain in the a55 connecting/disconnecting the console cable from one hardware to another when i need to access the hardware direct. Jeremy uses…
-
How Isp works
hi Dear users i have one question about connection of ISP. how an ISP connects us to the rest of the world.can anybody explain it or share any link. and 2nd part of the question is this that when we are connected to the isp through a adsl (router/modem).this connection between me and my ISP in which category of networking…
-
CCDA Exam Passing score?
I am trying to find the answer to this, but am striking out. Call me dumb, but what is the passing score for the CCDA exam? Thanks
-
Failed CCNA Security/ changing gears and vendors
Failed the 640-554 today. I scored 794 and needed an 804 to pass. Surprisingly, I'm not really bummed about it. I studied for 3 weeks and I almost passed it. I am disappointed with the exam having GUI based exam questions since most configs are done from cli. I've done firewalls, Nat's, even some vpn. I don't want to waste…
-
CCNA Sec - No card with certificate?
Hello All, I just received my certificate in the mail and was surprised to find that there wasn't a card with the certificate. Do they not send them for the specialization tracks or did they mess up and not include it? Thanks
-
Failed ICND2 - twice.
Hi Everyone, I failed ICND2 today, the old version, on the last day available. The testing facility was a mad house and overbooked. My test started over an hour late. But thats not why i failed. I got a 760. Needed 825. Back in May I failed badly, 600. So i showed a lot of improvement, but needed to do better. I still…
-
Lab Exercise for Ethernet Switching
Where can I find a good lab exercise that corresponds to the PART 2 - Ethernet Lan Switching concepts of Odom Wendell's book? It should include Password setting, MAC addressing, VLANs, and Port security.
-
EIGRP Trouble shooting question help
The scenario is that I cant get my router to receive EIGRP routes from other routers in my topology. My router in question is in the right AS system, all my interfaces are up, up that should be. I have advertised the right networks, no auto summary command has been issued and there are no passive interfaces. I can ping the…