-
CCENT Tomorrow Morning - Last Minute Tips?
My CCENT exam is scheduled for tomorrow and I'm not feeling overly confident. Work has been absolutely ridiculous (data center move) so I haven't gotten to study as much as I would've liked. I've read Odom's book front to back and bought the Boson Exams. On those practice tests I score between 70-80% so I think I'm close.…
-
CCENT studying with Boson
Made the mistake of taking the actual exam when I barely started passing the Boson tests. For some reason, I thought it was twice as hard.... I'm now making nearly 100 percent on all the practice tests and understand why the answer I choose is correct. Cross your fingers for me. I'll be taking it again soon.
-
799
I'm so bummed. I was so close. I did worse on some sections that surprised me.
-
Free subnetting vid
I already posted the link to this, but it was in a thread that talked about the class..so I wanted to make it easier to find. Here goes! https://www.youtube.com/watch?v=JksE5Cqc25M
-
Network throughput question..
I have the following: client<->3560 SW<> Cisco Small business SW<>server everything is connected via 1GB links and in the same vlan Running an iperf test from client to server i'm getting around 500kbps Is this reasonable? Would a client on a different vlan run considerably slower, judging the 3560 had to route? Would…
-
Ubuntu or Windows 7 for usb to ethernet with 802.1q?
As the title says what OS would be better for this ? I've read somewhere that windows strip vlan tags. Adapters that I'm using have ASIX AX88772A chipset. Any help would be greatly appreciated.
-
how many times do you read each book?
what's up everyone! i've been on TE on and off for almost a year now. over that time my non-IT career started getting really busy. i got comfortable and didn't continue my studies. but now that things are a little slow i'm remembering why i decided to get into networking. i resumed my studies about two weeks ago. but this…
-
Printing in boson?
How do you print a specific page on the boson? I'am trying to print the Lab instructions when I about to print it, it shows that all pages will be printed and I can't select a certain page number. I have search the setting still no option to do that specific printing
-
Which Version of Unity Express
Is required if running CCME 4.2? Where on the Cisco site can I find which version is compatible with the CCME version? Have trawled through it, but getting nowhere! Thanks
-
CCNA: Data Center
So I just found this on the Cisco Learning Network. I got a little confused when I saw CCNA twice and the one on the top of the list said "Data Center" I thought they got rid of R/S for a few seconds. This certification has no prerequisites!!!! "For data center network administrators who want to save time and money on data…
-
Passed the CCNA
Wat up fellas. I passed the CCNA composite test this morning with no networking experience and with 3 months of studying using Testout CCNA. I lol at you guys spending all this time and thinking this exam is hard. EDIT: ask me any questions if you need help.
-
SDM and CCP
For the CCNA exam, which is required? SDM or CCP or both? Thanks.
-
CBT Nuggets GNS3 for Cisco studies
CBT Nuggets has a 30 day access to its new GNS3 series for $5.00 I just grabbed it up, we'll see by the presenter obviously loves GNS3 and is really excited about the course.
-
Anyone passed the CCNA composite at one go through self study?
Hi all,Just needed a bit of motivation.Is there anyone who has passed CCNA composite exam at one go and did not have to retake the test? I am too p***** off with the studies and the vast syllabus.The more I study (most of the days I study till 3 am)burning midnight oil and all the more I feel I have so much more to cover.I…
-
Quick book question
Which CCENT book of Wendell Omon is the most up to date one? I saw the ICND1 official exam guide Third Edition on Amazon, but what I'm reading is the CCENT/CCNA library and it says Second Edition. Am I reading an outdated book(s)? Thank you very much.
-
Cisco 1760 Max Flash
Whats the largest flash you can fit into a 1760 Router. Im finding the 32mb being to small for a good IOS and CME file set.
-
EIGRP variance command
Hey guys! Got a question for you... I understand that EIGRP supports unequal load balancing, up to 6 links, and I believe that this is established by using the variance command, but how exactly is this done? It just seems too simple to just type in "variance 2" on the interface and poof!... unequal load balancing! Anyone…
-
ICND1 Pass, second try
Got back on the horse and got my ICND1. Man, it's EARLY! Feels good. Worked for this one. Wasn't a perfect score but it was what I needed. Bahama Breeze tonight and tomorrow working on finishing out my CCNA. I am here to answer any questions other people taking the ICND1 may have. Thanks TE!
-
Routing question...
Here's what I have: ip dhcp pool DHCP network 192.168.111.16 255.255.255.240 default-router 192.168.111.30 dns-server 192.168.111.67 The devices in the network is 1 router, 1 switch, and a couple clients. I know that the dns-server is in a different subnet than the PCs will be in. So, I know that I need a route in the…
-
Why is EIGRP fastest converging? Especially compared with OSPF.
OSPF is also triggering update. So, what could be factor that makes OSPF particularly slower than EIGRP when converging?
-
Passed my CCNA!!
Hi All, I haven't been around here for a while, and thought i'd pop back. started my CCNA track in 2010, and have just passed, so it's taken a little more than 2 and a half years. Lot's of reasons why it's been so long, but i can say it wasn't easy! Server 2012 is next on the cards, and the CCNP! :)
-
GNS3 Initial setup (w/ IDLE PC) video
I got a couple of PM's more than usual this week..so I present you a 16 minute video on setting up GNS3 (importing images, setting IDLEPC values, adding links between devices, and adding modules to slots on devices). Enjoy! https://www.youtube.com/watch?v=LY_H0mmJfp4
-
How to configure a frame relay switch in GNS3 (tutorial)
As promised..here you guys go! Thanks to your input- I made it as short as possible! https://www.youtube.com/watch?v=_wxbSdWv_Ws Edit: Be sure to select "720p" for best quality.
-
What's ur score?
CISCO-CCNA Quiz - free online quiz, test and trivia Took this one and was pretty disappointed with my score with less than a month to the CCNA composite exam fr me For all those who plan to appear for the exam next month what's your score?
-
2012 goals complete - ICND2 passed
Well that's it now for this year, I passed my ICND2 today on my second attempt. First time I didn't feel especially well prepared but I wanted to make an attempt at the exam before I started my new job. When I saw I scored 817 on my first attempt I was pretty upset, I couldn't have gotten much closer without passing! So I…
-
bellman algorithm
any book or link which has explain clearly a bellman ford algorithm
-
Can OSPF manage a bigger network because of its hierarchical structure?
Is it fair to say each single OSPF area can manage up to the same size a network as independent AS in EIGRP does? Then it seems like a multi-area OSPF can manage much bigger a network than EIGRP! Multiple connected EIGPR ASs are not comparable since the external AD is 170.
-
Multiple Ways to see Dlci to IP Mapping?
I was wondering if there are any other ways to see DLCI to IP mappings other than the show frame-relay map command? Thanks
-
CCNA labs through annoying remote desktop connection
I have purchased Netsim boson simulator from one of the so called centres for CCNA training.However, i have to access the lab using remote desktop connections which keeps on disconnecting when someone else accesses it.This becomes very annoying and often i lose the flow and my interest in labbing.I have already spent…
-
VLANs & VTP
Hi to everyone! I just finished the VLANs and VTP chapter and have some questions I need answers to leave this chapter with no weight on my chest 1. Client VTP switches can't have VLANs on their interfaces that Server VTP switches don't have on their interfaces. Because Client switches can't create VLANs. So if Server…
-
Hard core CCNA labs?
I'm going to be competing for the World Skills Cisco competition next year and is wondering if anyone has a link to some hard core CCNA labs. The idea is I want to lab myself to distruction, my hope is my head will explode similar to Peter Griffin's on one episode of Family Guy... But after I win the World Skills…
-
CCNA cert as license
Hi. Personally, I just want to clarify if the CCNA cert is considered a license. Thanks
-
ICND2 ifconfig?
I've been using the Cisco Certification Practice Exam for 640-816 ICND2 recommended by WGU to prepare for the ICND2. It's on cicsco website in the cisco learning network store. The test can be a little tricky but I was confused when it asked me which command would show the the network interface on a linux system. Now don't…
-
Top Down or cert guide first?
Hey guys, I am awaiting a job offer that is going to require me to get some design knowledge. I know I want to read both Top Down Network Design and the CCDA cert guide, but which order should I do it in? From what I have been reading it seems like Top Down is a little more higher level but not as technical so it may be a…
-
Failed CCNA twice!
Oh God, once again. Well, a background story: On 2010, I took all 4 modules of CCNA as part of curricula for my degree in Sys Admin in college. On 2011, I took CCNA Wireless and Advanced Routing CCNP (no certification exams of course), but I went through all those 6 modules and passed. Last october, I thought I was ready,…
-
ethernet vs serial
In a lab environment is there a significant reason 1 would prefer to use serial connections like a WIC2T vice just using cat5 with a WIC1 DSU T1? I know traditionally with serial connections you set encapsulation, but i'm thinking that is a function of WAN protocols, not the physical media but I could be wrong.
-
Network Question on a lab
Hey... Quick question.. Doing a lab which is saying that Router 1 has a S0/0/0 interface with an IP address of 10.1.1.1 and a subnet mask of 255.255.255.0 My question is... How is that possible? I know 10.0.0.0 is a private network, however it is still a class A network and should have a S/N Mask of 255.0.0.0 I am…
-
Possible Typo Chapter 12? (CCENT/CCNA ICND1 Official Cert Guide, 3rd Edition)
Hello all, I was going through the "Do I know this already?" section of chapter 12 of the CCENT/CCNA ICND1 640-822 Official Cert Guide, 3rd Edition and reviewing my answers, when I noticed some odd numbers in the text. Question #3's answer in the back appendix reads as: "Seven subnet bits could, because 27 = 128 => 100.…
-
ospf help in packet tracer
Hi Could anybody please help me to find why router 3 dosn't show any ospf route in my network? I tried to attach my .pkt file by zipping it but it doesnt not allow. Router#sh ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 -…
-
Nooblet about to drop bank on lab gear...
Hi everyone, Sorry for another annoying "What Lab Should I Buy" post. My wife made me ask before I opened the wallet Been lurking around here and reading up. I have searched 20+ CCIE blogs, 3-4 forums, INE, Cisco, bla bla bla... Most lab writeups seem to be based on what will work now, with little thought as to down the…
-
which ios 2620xm ans a 3640
planning on useing for CUCME CME 4.1, not sure which one to load so many. was thinking c2600-adventerprisek9_ivs-mz.124-15.T13.bin for my 2620's for the 3640 I'm not to sure seen c3640-ik9o3s-mz.124-7h.bin thoughts???????????
-
Can you install an IOS without the recommended ram and flash?
Can you install and have the router run slow in a lab environment, or will I be forced to upgrade the ram and flash in order to install the IOS I want? If anyone is wondering I ordered a couple of 3640s and a 2950switch. I do not have the specs in front of me, but I know they are not maxed out. I was so sick of not…
-
Free LIVE Subnetting deep-dive (online)!
So in a nutshell, I've recently done a couple of remote training sessions for a customer, and have decided to branch out to offering remote training to my fellow TE members. That being said, the pilot training will be a subnetting deep-dive. The cost? FREE! All I ask- is that those who attend..if you like it, please tell a…
-
Offical cert guide practice exam close to the real thing?
Aside from the simulations, since there are none, how close to the real exam are the Pearson practice questions that come with the CCNA Security 640-554 official cert guide? They seem pretty easy to me but i might just be ready to take the exam.
-
Incorrect username and password: No Matter what I do.
Good morning all, Need some help here.. I am getting really aggravated with trying to lab for CCNA Sec... I am using GNS3 ( which I do not care for..) because I do not have good enough actual routers to support features needed for CCNA:S... So yea, I am having trouble setting up CCP to talk with my router in GNS3. This…
-
Going for 640-554, a few questions..
Hello everyone! I'm looking to go for the new CCNA Security exam. I understand that I can lab most of what I will need through GNS3 and use the book for the rest.. However, I am wondering with the new exams which IOS version should I lab with. Thanks for any help.
-
Packet Tracer help
Hi All Wonder if someone can assist me. I am trying to Telnet into a Server from a workstation. The Server can be pinged but each time i go to type Telnet 192.168.1.18 i get connection refused message. On the server in Packet Tracer i do have the service on, and also created username and password. Thanks
-
CBT Nugget VLSM video question
I am currently watching the Video on VLSM and I have a question. Jeremy Cioara is showing how to get the host users for his example in the VLSM Video. I think he is incorrect as far as the actual numbering scheame goes. In the Example he needs to find 60 users, 20 users and another 20 users plus wan links 1. 192.168.1.0…
-
Frustrated with a certain type of VLSM question
Guys, I can do very well at Summarizing, creating a VLSM network, and knowing what type of CIDR address is needed, but these type of questions REALLY throw me off. Does anyone have an approach they share that doesn't take 5 mins out of a 70 min test :P
-
How EIGRP protects from route flapping?
In RIP, I know it's hold down timer, which prevents excessive update due to the up and down. In EIGRP, it seems like no such a mechanism. Then, would it cause flooding of updates when flapping happens?
-
What to do for the next month or so
Hi Guys I passed my CCNA last month and since then i've found myself having a lot more time on my hands but no using it usefully. I want to start studying CCNP route, But i feel without more knowledge about the technologies around cisco it will be no use, my knowledge with cisco will grow but for example when it comes to…
-
stuck setting privilege level
I keep trying to set privilege level but when I test it the password does not work. here is the config i have entered. R1>ena R1#conf t R1(config)#enable secret level 15 5 cisco123 R1(config)#enable secret level 4 0 ping R1(config)#exit R1#exit R1> R1>enable password: cisco123 R1#exit R1> R1>enable password: ping password:…
-
Remote Access to Lab
Hi All, I have my ADSL router connected to my ISP. If I connected my access server (cisco 2509) to the ADSL router and wanted to access the 2509 remotely using SSH, would it just be a case of setting up port forwarding for SSH traffic on my ADSL router? Obviously either using a static IP or Dynamic DNS. Thanks
-
CCNA Pre req's
I havent been able to find a clear answer for this....but do you have to pass your CCNA 1st before being able to take the CCNA Security test or can you go straight to CCNA Security?
-
anyone passed CCNA Voice this year ? CME express vs. CUCM full
If so, how important is it to have practice on actual implementations of both CME express AND ALSO the full version CUCM ? I understand the old version of CCNA Voice only covered CME express, but now it covers both CME express and CUCM full. The reason I ask is that I have CME express sorted out, but I dont have any CUCM…
-
YFZblu's CCNA: Security journey (640 554)
Hey all-- After achieving my CCNA, I decided to specialize with the CCNA Sec track. I've never done anything like this before, but I'm going to post daily to this thread to keep a running log of my experiences; good and bad. I don't have much to offer now in terms of security, just my security+. So as you'll see in my…
-
Problem with dhcp
I am working on lab in which I am having some problems with dhcp leasing ip address. I setup vlans on one of my switches but it seems my vlans are blocking packets. Can explain what wrong? Router cfg:hostname Routerip ssh version 1interface FastEthernet0/0 no ip address duplex auto speed auto!interface FastEthernet0/0.1…
-
CCNA composite instead of 1&2
Hello, I failed my ICND-1 within less than 5%. At this point, I'm leaning towards Composite. I start my ICND-2 learning soon. People say "you have to move fast." I am good at moving fast, I always have time spared at the end. (Not that I skimmed and randomly answered)> If time management is not an issue for me, CCNA seems…
-
In Search of a good test simulator
Don't want to break the bank. What do you guys think of Odom official Cert guide 3rd addition? Where the practice exams helpfull? I really want something that is going to test my skills. NOthing worst taking an exam with false hopes. Almost done reviewing all of the Cisco Net academy. I would like to start preparing for…
-
WIC1T not recognised in Router 2610XM
I am not able to see anything in the hyperterminal window when i start the router 2610XM with WIC1T inserted. It is not showing anyerrors. When i remove the WIC1T and start the router then it works. Could you please help me out to fix this issue.
-
Help to get a network map
Hi Masters I'm assigned to draw a factory network map. There is a core , distribution and access layers , the old administrator did not left any map or something to help. Seen the approach of deadline I'm searching for a tool that can give the existing map or to let me do a network discovery by the end to have the MAP…
-
a post aimed CCNA/CCENT candidates.
-
EIGRP routers do not see each other?
router1 router2 However, "show ip eigrp neighbor" does not show the other side...
-
passed with 924!
So yeay I passed today with 924! it wasnt so hard to be hounst. I have a question guys, is it worth to take CWNA after CCNA Wireless ? or CCNAwireless consider higher level than CWNA?
-
How the EIGRP router learn the bandwidth/delay?
EIGRP router needs bandwidth/delay to a specific destination to calculate the FD or whatever. However, how an EIGRP router learns such parameters? I don't see such values in topology table. Are they manually specified?
-
question about port security
I enabled port security on a device switchport port security switchport port security maximum 2 switchport port security violation shutdown switchport port security mac-address sticky I took out the mac address sticky command and when I put in a new device it shuts down automatically. I clear all port security commands and…
-
CCNA Question
I am doing CCNA in college. I am doing Semester 1+2 this year, but Semester 3+4 is covered in year two. I am thinking about changing college next year so I want to finish CCNA during the summer. Is ICND 2 the same as Semester 3+4? If not could I buy a book and self study Semester 3+4 and book the exams somewhere?
-
Failed ICND1.... score 799
I guess I would rather be a strong CCENT after two attempts then a weak one with a pass the first attempt. I must say my first fail sucks. I'm in the process of scheduling it again last week. Weakest areas: Describe the operation of data networks 40 Explain and select the appropriate administrative tasks required for a…
-
issue with POE switch
HI Dear administrators I'm facing an issue with a Cisco 3650 switch with 48 ports. On this switch 17 ports are not working so all ip phones plugged are not on " no electricity or no power" , how could I handle ? thnks for help
-
ICND 2, wildcard question for practice test question
There are 3 servers in a subnet: server # 1: 10.10.10.1 server # 2: 10.10.10.2 server # 3: 10.10.10.20 All servers sit behind a router. (R1) The company would like to allow web connections to server # 3, and has done so with the following access list: access-list 101 permit tcp any host 10.10.10.20 ^^^ I do understand this…
-
CCNA exams and certification
I have very recently decided to study for CCNA. I have been familiarising myself with process of becoming CCNA certified. I see that there are two routes, 640-822 ICND1 + 640-816 ICND2 or just the single composite exam. I've pretty much decided to go the two exam route. I live in the UK, I have registered with Pearson VUE…
-
The future
With the big day (ICND2) approaching 2-3 weeks, I'm already thinking about the next certification. My question is: Should I go to CCDA and CCNA Voice OR should I start hitting the CCNP, and then go CCDP and CCNP Voice.
-
confused buying the right ip phone :|
Hi everyone, Im a bit confused buying 7940 or 7960 ip phone because of the poe,poe+,inline power... (dont know what are these!) Have a WS-C3550-24PWR-SMI PoE w/EMI,which one of these ip phones work with 3550 switch? (I want to use ip phones without ac-adapter) Thanks in advance
-
DTE Unknown (13) clocks stopped
I have a 2621XM with IOS 12.4(16a) and have installed a wic-2t it is being recognized and i an able to configure the interfaces but I am using the router as my internet router to connect to my ISP. the status of the interface is showing up but protocol is down. When I do show controllers i notice "DTE Unknown (13) clocks…
-
fail CCNA Security today
I got a 763, needed 804....... pretty lame, even though I didn't really feel ready. I have the Official Cert Guide, and I was passing the tests on the associated cds, but I don't feel they are an adequate representation. I also purchased a Boson ExSim Max exam, and I was not getting a passing score there, so I should have…
-
RIPv2 / Questions
Hello all! I had a few questions. I have 3 switches in a triangle. Each switch has vlan(s) that are only local to that device. IE; Switch 1: Vlan A Switch 2: Vlan B,C Switch 3: Vlan D,E Also, there are some VLans that are common between those switches. I currently have those vlans added to the LAGS between each switch. My…
-
I am confused: IP address for different hosts in different VLANs
I am confused. How does an IP address is given from a Microsoft DHCP server to the clients. Lets say we have around 6 scopes (Computer,Wireless,Printers,etc) in the DHCP server. How does the server know which range to give the client ip address from? Is it because of the "ip helper address" command in the Cisco switch?…
-
Finally booked ICND1 for Jan
Well I finally was financially able to book ICND1 for January. I have taken cisco classes in the past and have some IT experience on the Telecom/Tech Support side. I took the test years ago and came close but I'm ready to attack this stuff again. I am going to go through the Sybex book with Packet Tracer and maybe later on…
-
Password (fail) recovery in a 2950C switch
Im having the following problem. I bought a switch that it was shipped without supplying me the console password. I read the cisco documentation Cisco Catalyst Fixed Configuration Layer 2 and Layer 3 Switches - Cisco Systems and I tried to send from Teraterm (ALT+B) the Break sequence when it says the initializing flash…
-
ipv6 anycast: any practical usage example?
I knew it's "one-to-nearest". But to be honest, I'm little bit lost when we will need this function. Does it have any peer function in IPv4?
-
Cisco Networking Academy in 14 Weeks?
I've visited these forums for a long time but never posted. I appreciate all of the help you all provide. I am making a career change and don’t have any IT experience. I signed up for a Cisco Networking Academy Course (Discovery) that is supposed to cover all four sections in 14 weeks.* I signed up for this course in order…
-
Issues w/ Odom
I took a CCNA course 8 months ago and read both Odom books back to back. I then put off studying for 4 months while I got buried at work. I was laid off so now I have all my time to devote to studying again. Although I feel like I am playing catch up. I have tried numerous times to read and reread Odom and I just can't get…
-
Packet Tracer IP and Subnet Help!
I am working on a 'take home' final and I am stuck on getting the IP addresses and Subnets for this Packet Tracer activity (Step 4). Can someone please help me? I added the packet tracer activity here: SmallFiles - Free File Hosting Thanks!
-
CCNA - me too :)
I've done my ICND2 today. It was intense, but I was happy to see at the end that I got 916 points. :) Moments before the final screen, I didn't feel that good about my performance... I haven't been posting here for a while, as I was really trying to soak in all of the ICND2 material (primarily the wonderfully difficult…
-
CCNA....finally!!!!!
Well, I retested the ICND 2 today and passed it! That makes Security+ on August 1st, CCENT on October 10, and CCNA today. Too happy right now knowing I've reached my first goal. I'm going to possibly enroll at WGU to pursue a B.S. whilst working in the field and deciding to wait and do SSCP or start learning CCNA:Security.…
-
ICND1 Friday...
ICND1 booked for Friday. Took a while to study for and book but Friday is the day. I've studied Lammle's CCNA book 6th edition (relevant chapters)/ w test software CBT Nuggets ExamCram CCENT book w MeasureUP test Self-Test ICND1 software practice subnetting on subnettingquestions.com (GREAT WEBSITE BY THE WAY!) I think I'm…
-
Passed ICND1 Today...
Materials Used: Cisco Learning Labs CBT Nuggets TechExams.com (of course) Free CCNA Workbook subnettingquestions.com - Free Subnetting Questions and Answers Randomly Generated Online 874/1000. All in all, while I am happy with the pass, I am just a bit disappointed with my score. This is the first cert where I have not…
-
which router is better for voice studies 2691, 3640 or a 2621
I was just giving these routers, I know they are out dated but free is free. Which one would be better for my ccna voice lab for cme, and which would work better for my gateway for cucm. Both the 2691 and 3640 are like new and the 2621 is older. Also what IOS should I look to download.
-
please help me on this
How to find 1.the default subnet mask 2.network address 3.host range 4.broadcast address 5. nth IP address of a given ip address......
-
Changing EIGRP Weights in Packet Tracer 5.3 Help
The Command is R1(config-router)#metric weights tos k1 k2 k3 k4 k5 The tos value is always set to 0. k1=Bandwidth k2=load k3=Delay k4=reliability k5=reliability So If I wanted to change the default Is this how you type it in Packet Tracer? Router(config-router)#metric weights 001101 :: My reading say leave it alone, but…
-
Lab setup problem with switches communicating with each other.
Ok this is the lab setup for INE ccna course the only difference is that I do not have router 5(it's in the mail as I type speak and it's also another 1760). I have added my ip addresses according to INE. Now my problem is that I can't ping anything that is not directly connected. So I can ping the routers and switches…
-
CCNA Partner Pack from CBT Nuggets
Saw this on my Google+ today. Quite interesting. CCNA Pearson Partner Pack IT Training
-
INCD1 Booked for January
Well I finally was financially able to book ICND1 for January. I have taken cisco classes in the past and have some IT experience on the Telecom/Tech Support side. I took the test years ago and came close but I'm ready to attack this stuff again. I am going to go through the Sybex book with Packet Tracer and maybe later on…
-
ip subnet zero help please
sorry all, i know alot has been posted on this subject got a question where in a topology there are pc's and routers connected, with ip subnet zero configured if for example theres a wan link using the 192.168.5.1/30 which is connected to a lan which is using 10.22.22.22/13 with the ip subnet zero command configured, will…
-
icnd1 booked
got the exam in a few days been going through my notes, done the cisco press exam a few times, can subnet class c quickly, i feel my labwork is good going on the sims which were in the practice exam what are everyones tips for the exam? are the sims the exact same layout as in the boson system that comes with the cisco…
-
Just passed CCNA3 Discovery final exam!
I don't know if it will mean much to any of you who are self-studying for the CCNA exam, but I have just passed CCNA3 Discovery final exam with 84% and feel so extatic about it that I couldn't resist boasting. I know most people don't understand why people spend alot of money taking the Discovery route but I am now…
-
wildcard mask on eigrp
Hello guys, I have doubts with the wildcard mask used for the basic configuration of eigrp. Configure the wildcard mask as follows: network 192.168.1.8 0.0.0.3 -> Means announce networks over the range 192.168.1.8 - 192.168.1.11? and configure it in this way: network 192.168.1.8 0.0.0.0 means to preach only the network>…
-
Using switchport as "hosts"
Hey all, I'm trying to setup a lab and have several ports in use, all on different VLANs. I got a 3750 switch and did a "no ip routing" and "no switchport" on a few ports. I assigned the ports IP address and can successfully ping the IP of the VLAN on the switch which it's connected to (this is where the VLANs are set).…
-
I need assistance with cisco vpn
I AM HAVING A CISCO 2911 ROUTER AND 2901 ROUTER, I AM TRYING TO CONFIGURE VPN ON THEM BUT THE VERY FIRST STAGE TO START THE CONFIGURATION IS WHERE I AM HAVING ISSUES. THE ISSUES IS THAT THE crypto isakmp policy 1 does not work on the routers. And another quick question. any one knows where i can get a vpn client software…
-
rack rentals for CCNA voice?
----Optional reading---- Hello! I started studying for CCNA:Voice at the beginning of November and now have 72 hours of study time in. Yes, I know a heck of alot more than I did in the beginning (started by knowing nothing) but I feel that working on live equipment is essential to gaining real competence. This is very…