-
Cisco Arch 300-320 Schedule for end of March 2016
I'm taking the Cisco Arch 300-320 towards the end of March. The materials that I will use to study include: Videos Cisco 642-874 CBT Nuggets Cisco Arch Boot Camp INE CCNP Routing and Switching Route 300-101 Books & Kindle 642-874 Arch (Nov. 2011) 300-101 CCNP R&S Official Cert Guide (2015) CCIE R&S v. 5.0 Official Cer…
-
two days til CCENT
Any pointers gents? Using flash cards atm and the Exam Cram tear-out-sheet as my refresher till Thursday.
-
hey guys are you willing to help a little here,,,,,
i want to create a voice lab at my home,,,i have 2801 router installed cme 8.5,,,,i didn't get unity express to attach with cme. what i got only is CUCM Business edition,,,,and installed on vmware player,,,,I am just starting to go on with the help of reference books,,,,so i don't have much idea about how these tools works…
-
I don't understand the answer on a question about a switch forwarding decision
Dear Colleagues, I am preparing for the ICND1 exam and use the Cisco Official Certification Guide. The first question in Chapter 6 Review is a question about how a switch decides to forward a frame destined for a known unicast MAC address. a. It compares the unicast destination address to the bridging, or MAC address,…
-
CCNA: R&S or Security
I was enrolled in WGU's MSISA program. I was part of the program when the CCENT certification was part of it. That cert is going to expire in November, so I'd like to "upgrade" it, so I don't end up losing it. Since I'm more so focused on security, I'm thinking that CCNA Security would be the best path to go. However, I've…
-
Passing without Real Gear? Need some advices
Hi guys, need some advises here.. I want to start a new journey into studying for another certificate (inclined to do a cisco exam, but feel free to suggest other network-related cert as well).. these are my current choices to take: a) ccna security b) ccna data center c) CCNP R&S I had passed ccna r&s just by using packet…
-
Setting up ACL for network. restrict access
Hi. So I'm trying to set up a network. I have a router (R2) connected to an outside network server 209.165.200.224 and to another router R3. On this router I want to set up an access list which will allow anything in my inside network 192.168.x.x to ping to outside networking 209.x.x.x and allow the internet/outside web…
-
Setting up restrictions on router ports with network security policy
Okay so here is my scenario. I need to connect a maximum of 2 hosts dynamically to each switch interface. And then if the policy is violated the interface will be shut down. which commands can i issue on a catalyst 2960 switch to meet this policy? Shaking my head over this. thank you.
-
Need help with DHCP Aget Relay
Hi guys.. going nuts over here. I know the DHCP helper-address is simple, but I'm not sure if im doing something wrong or if its a bug within PT (packet tracer) My topology is simple. I configured everything Trunked / sub interfaces / and ip pool, however PC3 will not obtain a default gateway, but it receives an IP address…
-
Privilege Level vs Parser View
I am having some difficulty understanding the difference between a privilege level and a parser view. From what I understand, both allow you to assign commands to a view or privilege level. What is the difference between the two? The book I have really does a poor job at explaining parser views and I am finding very…
-
Will they be updating ICND1 soon? + Study material suggestions?
Hey guys, I've just started studying for CCENT after finishing CompTIA A+. Just now I realized the exam isn't a very recent one. Should I worry about them suddenly releasing a new exam or something? I haven't seen any information on that, but want to make sure. Also, what study materials do you guys recommend? I'm using…
-
Looking for advice on a lab.
Hi all, I'm looking into building a lab hopefully by early/mid May (moving half way across the country). I'm looking for something that I can learn everything I need to know on from the CCENT to CCNP level. There has been a ton of threads about this same subject I know but I would like to have all the hardware and add it…
-
Cert renew
Hi. I wondering if i do the ccna sec will renew my ccna r:s or i have to a ccnp r:s to renew my ccna r:s? Cheers.
-
Which Udemy Course 2016?
Hi guys, I want to study for the CNNA. I've been looking at udemy offers and there are two stand out courses. Chris Bryant's CCNA 2016 200-120 Video Boot Camp. Lazaro Diaz's Cisco CCNA (200-120): The Complete Course. They both have many students enrolled with a high satisfaction rating, but I don't know which to go for.…
-
Which Frame-Relay communication do you prefer to use?
There are Point-to-point , Multipoint, Point-to-multipoint communications in Frame-Relay. I want to know which is better to use and why? Thanks.
-
Need some feedback regarding buying some hardware.
Hey all, I am looking at buying a refurbished 2801 and a 2960 for my lab to do bigger topologies. Because I am on a budget and reside in Canada, I did some research on a reseller and they said the router costs $30 and the 2960 costs $75. I got a quote from another reseller whom I have bought from before (with no problems…
-
Passed 100-101 today.
Well after about 3 months of studying 4 or so hours a night I've managed to pass ICND1. I used Wendell Odom book for the initial full read. I took a 2 week class last year as part of a program. I watched Jeremy Ciora CBT nuggets series. I used packet tracer for lab. I used a site referenced on here for subnetting practice.…
-
ICND2 Pass
INCD2 Pass- 881/1000 I passed the ICND1 back in November but finally had time to focus on ICND2 just in the last month. As such, about a solid month of time was dedicated to study averaging maybe 15 hours per week. The Odom book, GNS3, and VIRL made up my main modes of study. I labbed everything out using various…
-
Which cram guides?
I read somewhere (heck it might have been here) this "rule of thumb" for passing the CCNA: What are these cram guides he speaks of and where can I find them? Yes there's google, but what do you guys recommend?
-
Failed 640-554
Read OCG cover to cover and labbed in GNS3 for IOS router stuff + on a real ASA5505 and Layer2 labs on 3750 switchFailed by 21 points on the last day to take this exam. I was very surprised how out of scope the exam was, several questions with topics not even mentioned in OCG book. But what I think really got me was a…
-
Find IP address for trunk devices?
Myself and a co-worker are in sort of a study group for the CCNA. I'm still trying to wrap my head around trunking. We have setup a lab situation where we are trying to identify devices connected to a switch where all ports are setup as trunks. So basically my question, if the ports are trunked, is there no way to tell…
-
CCNA Lab what else do I need ?
Hi, I have just recently started preparing for CCNA and my first step was to get the hardware required for building a home lab. So I bought these Routers 2851 512ram iOS 15 2821 256 ram will upgrade ram for iOS 15 1841 384 ram running iOS 15 Switches Cisco express 500 was thrown in for free 3550 Poe iOS 12 latest…
-
INE year subscription
I've bought a month's subscription to cbtnuggets before and liked it. But is it worth paying for a year subscription to INE (they have a discount for leap year) or cbtnuggets?
-
Cisco VIRL for CCNA
Has anyone tried using Cisco VIRL for CCNA study?
-
Ine ccnp security
Hi Looking to get the INE CCNP Security videos to help go above and beyond for my CCNA Sec studies. Can anyone recommend if they will help pass the exam? Cheers
-
It's not better to perform Router-ZBF processes before NAT processes on Cisco Router?
Hello guys. As you know, if NAT and Zone-Based Firewall (ZBF) have been configured on a Cisco router, NAT mechanism is performed before ZBF mechanism. So, suppose you denied accessing, from your inside zone, to a website with 5.5.5.5 IP address, that is outside zone. Also suppose you NAT'ed your inside IPs to an inside…
-
200-310
Hey, How do you take the 200-310 when the book hasn't even been released? Thanks
-
CCENT Minimum Lab Requirements and Advice
Hi Folks, I am about to start on the first rung of CISCO certification, with the ICND1 (which I understand you need to pass to achieve your CCENT). I came across the other day, a post on this forum I believe, where someone had provided detailed information on not only the equipment they used for practice, but also provided…
-
Please Read! - Cisco Aironet 1100 AP Wireless - Resetting AP Endless Loop
Thank you for taking the time to look at this post :) I have a Cisco Aironet 1100 series Access Point - AIR-AP-1121G-A-K9 I have been trying to get all of our access points switched over from autonomous to lightweight mode so that our LAN Controller can manage all of our AP's. When I attempted to upload a more recent image…
-
200-120 vs 200-101
Hey guys I have a current CCNA but need to study up and re-take it From the cisco cite it says I can re-certify by passing any Associate level exam so I will do either 200-120 CCNA or 200-101 ICND2 Just want to know which one is easier to pass or easier to study for? I know its more subjective to what you know but I could…
-
Free CCNA/CCENT Lab Guides
I wrote lab guides while I was studying, basically writing down the scenarios I was creating while practicing. I am sharing those with everybody who's interested in actually learning the stuff and practicing vs brain dumping. You can grab the two guides from my website @ SUBnet.192 Share them, use them and post feedback…
-
Study Material
Hey guys, I recently passed the ccna and am thinking of taking the voice route. Does any have any good advice on study material?
-
Recommendations
Im Fresh from taking my CISSP Test Passed it now I'm moving onto CCNA I will be taking the 1 CCNAX exam i have a voucher for it already scheduled it for late April. I have the official two book combo from cisco I have a small lab two switches and two routers and the Udemy class from LAZ anything else you recommend.
-
Stuck on Frame-Realy over OSPF
I've configured "Frame-Relay Multipoint Subinterfaces" over OSPF. But it doesn't work and there is no ping between Hub & Spokes. And How to configure the Cloud? This the RT5 (HUB) #show run : ! interface Loopback11 ip address 10.11.5.5 255.255.255.255 ! ! interface Serial0/0/0 no ip address encapsulation frame-relay clock…
-
Can't quiet figure out this one subnet question.
Hello! I have been practicing on subnet questions for a few days now and getting a hang of it. Although there is one question that threw me off: Question: You are designing a subnet mask for the 172.16.0.0 network. You want 30 subnets with up to 1400 hosts on each subnet. What subnet mask should you use? The thing is I…
-
Magic Number and the CCNA
Hopefully this question is allowed to be answered. I know there are rules on asking specific questions but I think this is vague enough for a yes or no. I've been learning subnetting from a variety of videos and reading about it in Windell Odom's 100-101 Cert Guide. I really like the "Magic number" method and was wondering…
-
Should I attempt the exam if I haven't mastered subnetting?
Hello! I am planing on taking the ICND 1 exam at the end of this month. However, I been having doubts as I haven't mastered subnetting completely yet. I can subnet class C networks and some class B networks. I have been studying this for over a year now. Do you think I should attempt it anyways even if I don't end up…
-
Considering New Study Resources...Along with a Target Exam Date!
Hey All, I recently finished my first Netacad course for the 3rd time already and I have to say.....I was a bit pissed. However, I got the practical portion completed this time and passed but the theory stuff bit me by 7 points from passing. So I talked to my instructor and he said that if I get my CCENT or CCNA before…
-
Spanning Tree
Hi guys, could someone please exactly describe me how STP root and designated ports will be chosen? If I'm right: Root ports will be elected in the way of comparing the path costs of each link from a non-root switch to the root one where the path with the lowest path cost wins and will be the root port. Designated ports…
-
Pushed back ICND2 exam date
I decided to push my ICND2 exam back another 2-3 weeks. Starting to frustrate me. This is the 2nd time I've delayed it. I keep getting blind-sided with my work schedule (a lot of overtime + travel) and have had almost no time to study. I've been watching Wallace and Bryant, along with doing some labs. Speaking of labs, my…
-
Building a home lab
Hello everyone. I'm excited to become a member of the forum. I am studying for my CCENT and am looking to put together a home lab to practice with. I have found 4 catalyst 3560 switches (2 - 24port 2- 48 port) on Craig's list for for $200. I am curious to know if this is a good deal for this equipment and if all 4 of them…
-
Advice Needed on CCNA Security Path
My goal is to take the CCNA Security. What do you think the path that I should take, CCENT>CCNA:Security or CCNA:R&S>CCNA:Security? If I will go with CCENT>CCNA:Security, is CCENT enough as a foundation for CCNA:Security? Thanks.
-
Questions about Building a Budget Home Lab
Ahoy! I achieved my CCNA R&S almost a year ago. In between the time I feel as though I have gotten rusty. I only used real equipment (that was really old) about six times in school, and one in time in the field. I work at an IT Level 1 help desk currently. I went to a Sys Admin interview, and my rust became very apparent,…
-
Can you still use the old CBT Nuggets CCNA voice videos for Collaboration?
There is a lack of study material for CCNA Collaboration and I have the CBT Nuggets videos. Can these be used for studying or should I invest in the new CBT videos?
-
CCNA-Cloud Preperation
Hi - Can anybody weigh in on suggestions for preparing for CCNA-Cloud certification? I can't seem to find any study guides on Amazon. All I'm able to locate is a $499 training course on Cisco's website. Anybody have any suggestions on ways to self study for this? Thanks a lot in advance!
-
Help on OSPF protocol
hey guys, I set OSPF on routers and all devices can ping each other Except “Router 101”. It just can ping other routers which have 10.10.70.0/24 IP, but RT101 and computers can not ping each other. what is the problem? THIS IS RT101 #show run: hostname RT101 ! ! ! ! ! ! no ip cef no ipv6 cef ! ! ! username RT1 password 7…
-
VLAN Routing Question
I'm trying to figure out if I need any other configuration necessary for this scenario. I have two Cisco 2960CG switches connected by Fiber with two VLANs. VLAN 2 is internal and VLAN 70 is Public. The fiber connection is the trunk. Both VLANs connect to separate layer 3 switches. The internal VLAN 2 has the default…
-
ICND1 switching lab resource ?
Hey all, I'm looking for some more ICND1 switching labs. I have done configs from cbt's video's and my book as well as gns3vault's, but I'm looking for a few more. I can always create my own, but I like the element of surprise that way I'm not per-meditating my plan of action in my head. I do only have 2 switches to work…
-
Study Material
Hi all, Looking to start my CCNA Security studies. I have access to CBT Nuggets but thinking of supplementing the CBT Nuggets and OCG with another training vendor. Was looking at IPExpert, not sure if anyone can recommend or pass comment? I know INE is a great vendor although can't really afford the $700 AAP.
-
Async 16A card in 2811 Router
Hello, I am new to the site and recently started studying for my CCNA. I have my own at home lab which has 3 2811 routers and 3 switches and I have been following Chris Bryant on Udemy. I got tired of having to switch out console cables because you are constantly changing things in a lab so I decided to get an Async card…
-
Are ports/sockets considered layer 4?
What layer are ports & sockets?
-
Gns3 server
Would this be a good GNS3 server? HP Proliant ML10 V2 Tower Server System i3 4150V3 3 5 GHz 8 GB RAM 500 GB SATA 7 | eBay
-
Brain retention
After a couple stops and starts I'm on the road to CCNA-ville. I've been lurking around here getting the lay of the land. I'm 43y/o who's been a sys admin doing desktop and light network support for most of my career and I'm moving up at work slowly and I need my skills to match my duties. Tools: CCNA class through RPI…
-
Asynchronous vs synchronous vs isochronous communication
Hey all, Just wanted to know if understand these things correctly. To my knowledge asynchronous communiction is where the sender starts the transmission with a startbit and the receiver will have to figure out the clock rate of this transmision. In a synchronous communication the sender and the receiver will synchronise…
-
AAA with RADIUS server not working
Hi, I'm trying to get one of my routers to authenticate the telnet connections with a machine with FreeRadius installed. R2#show run | inc aaa aaa new-model aaa authentication login CISCO group radius local aaa session-id common R2#show run | inc radius aaa authentication login CISCO group radius local radius-server host…
-
4 Comptia Books and one CCNA - Is it possible?
The Comptia books I have are: Tamara Dean's Newtwork+ 5th and 7th ed. Networking for Dummies (All in One) Mike Meyer's Comptia A+ 9th ed. The CCNA Book I have is CCNA for Dummies. With these books, would I be able to pass the CCNA exam?
-
New to Cisco certifications
I'm completely new to certifications in this industry. Have only been working around IT for less than a year. I am getting more and more familiar with Cisco and have a strong desire to start learning and studying for my CCENT. Where do I even start?
-
Current Cisco Press Official Cert Guide?
Hello, I just passed my Network+ looking to start gathering study materials for CCENT/CCNA. I've decided to go with the Wendell Odom study materials but the latest ones I found on Amazon were published in 2013. Does anyone know if Cisco plans to update the curriculum/cert guides for ICND1 and ICND2 anytime in the near…
-
Ok going for ccna collaboration after my ccna
I can't really find much studying materials for this, any of u guys have feedback from the exams? what resources did you use? thanks
-
How good are the "bonus dvd" that come with home labs sold by kit builder
You see those labs sold on ebay that contain that "bonus dvd". But, they never tell you want is on them. So, what is on them and how good are the materials. Are they good in helping you getting started? Are they useful for passing the ccna? Let me know what your opinion of them are. Thanks
-
Which Practice test simulator to take to know if you're ready
Which practice test should I take to get a good evaluation of my knowledge and to see if I'm ready for the ICDN 1 test. I tried the Odom test and that one is hard.
-
Provider Edge Access Ring Question
Hello, I am a junior network engineer learning the ropes at my company. We are extremely busy and therefore there is a high amount of pressure on me to learn on my own and not ask too many questions. I am hoping someone can help clear up some confusion as to the reason why things are done a certain way. We are on a…
-
home hardware lab, 2 or 3 switches
I see lots of certification lab kit builders selling ccna labs with just 2 switches. And, I've seen on the forum recommendations for having 3 switches for doing STP labs. Of course, more is better, we all have priorities on what we spend our money. So, should a ccna lab have 3 switches or is two good enough?
-
What are the current CiscoPress study materials from CCNA (the books by Odom or Colla
Hello, I am getting ready to study for first the CCENT then CCNA. I think it is easier for me personally to do it this way. I was looking at the books written by Odom, but saw the CCNA Collaboratin books. Are the Collaboration books the new and up to date ones I should be studying for CCENT/ CCNA? Should I stick with…
-
Passed 210-260 Today
Hey guys, I passed with an 890 today and wanted to put my 2 cents in for anyone working toward the exam right now. I used CBTNuggets, OCG, and Boson through WGU to prepare. I also, primarily due to reading on this forum, spent a good bit of time finding additional resources to read more deeply into topics on the blueprint.…
-
How beneficial is it to practice on an actual ASA?
So for those that have passed the new CCNA:Security, did you practice on an actual ASA at all? (Either using GNS3 or a physical one) I'm going through the CBT Nugget videos and was having a pain last night getting the ASA to load into GNS3. Was using just the information on the videos to set it up. I'm extremely new to…
-
Which track?
I'm going to take my CCENT in just under a month and am planning on going all the way to the CCIE. My question is what track I should take? During college I was interested in studying voice but now that they made the collaboration I don't have the funds to spend thousands of dollars on the equipment. I'm also interested in…
-
Frame Relay
Hi everyone, I'd like to get some info on configuring Frame Relay. 1. If I have to configure point-to-multipoint subinterfaces as well as point-to-point ones (full- and partial-mesh hybrid design), how can I connect more than 1 router to the same physical access link, on which the multipoint interfaces have been…
-
passed ICND2 what now???
hi guys, I don't have any degree or work experience in IT, all I have is A+, N+ and just got my CCNA. My question is do I have any chance getting into IT industry? Which certification could I get next to help me at least get an job interview? I was thinking in getting MCSA next. I've been looking for junior network admin…
-
SecureCRT terminal - so worth it.
I love it so much. Because of the built-in tabs! I'm sure i'm not the only one that struggles with fitting multiple devices on the same screen. Either it's scrunching windows side-by-side, or I take up half computer screen to make sure I can get all of the output (More than 2 screens needed) Unfortantly its not free! It's…
-
what are the labs like in cisco exam
Hi all,just wondering still months away from doing cisco exam,but know very little about test itself,some say it easy others struggle and so on. so far i was told that exam is usually 40-50questions and 3 labs and 1h30min to complete. but given experience with PT there a a lot of more advanced commands missing,thus need…
-
Can't use Cisco SDM with my router 1841
Hi, - Router with Cisco IOS Software, 1841 Software (C1841-ADVENTERPRISEK9-M), Version 15.0(1)M7, RELEASE SOFTWARE (fc2) - Running config contains following entries: username <user> privilege 15 password 0 <password> ip http server ip http authentication local ip http secure-server - SDM v2.5 installed on my laptop -…
-
Free Cisco (CCENT/CCNA/CCNP/CCIE) Training Material
Not sure if most people know about this link or not: https://learningnetwork.cisco.com/community/certifications Click on the Cisco track that you want to look at and you should be brought to the page for the exams in that certification. You'll be able to link to study material, practice exams, exam topics, etc easily here.…
-
Cant get laptops to accept an IPv6 address.
Hey everyone, im having trouble with my CCNA home lab. im trying to set up a Ipv6 practice configuration, and my end devices are giving me problems. I have three Cisco routers, three switches, and three Windows 7 laptops as end/host devices. The routers are working fine, for IPv6, but I cant get the laptops to take a IPv6…
-
Building a Lab
Since I will be going for CCNA and CCNP I have decided to build a home Cisco lab. I have read up on other posts about what people have bought etc and I have come down to 4 2811's and 4 3560's. Is there anything else anyone would recommend that I buy or change up or just stick with these for the CCNA and CCNP. Note I have…
-
Traffic redirection to another address
Hi, i was wondering how i would go about configuring an asa firewall or router with a public IP to redirect traffic (for example web traffic for port 80 or 443) to a private IP address that has those ports open and is a web server? Cheers
-
What Determines a Subnet?
And what is a Subnet Mask, what does it do, in detail?
-
CCENT/CCNA Apprenticeship, dont know what to expect!
Was wondering what peoples thoughts were on how the CCENT/CCNA Course as far as learning was and things that helped them get through it as well as pass?
-
IPv6 network deployment
So I am hitting IPV6 pretty hard. The most fundamental concept I want to wrap my head around is actually deploying this from the perspective of a home lab or SMB. So, the ISP will give me a /48 or /56 depending on their procedures. If given a /48 or /56 I would probably chop that into /64's. So should I ask for an…
-
DHCP Binding question
I use a 891W as my main wireless router to force myself to use CLI instead of using a Linksys. Was trying to VNC my other PC earlier and it was failing. I did a show ip dhcp binding to check it out and didn't see it listed. I did a ipconfig on the PC and it had a different IP and was able to route to the internet without…
-
Need explanation: "line vty 0 4"
I'm a week into using IOS and the console, so far just been updating IOS and getting used to the commands. But the line command is not intuitive -- especially the numbers following it -- and I couldn't find references for it. For example, I know line con 0 is related to console connection, but what exactly does it do? And…
-
Now What?! Don't know what im doing....
Hello, I am complete newbie...but hopefully not for long. I have bought/built my CCNA Lab, which consist of: 3725 router, 1761, router, 2801 256/64 router, 1841 router, (2) 3550 switches, and a 2950-e switch I have all the cat5e straight through cable I could need as well as cross-over cables. The only thing is I have no…
-
CCNA Lab
Hi everyone, So I have bought some equipment for a CCNA lab (I plan on studying for it this summer). I have already purchased 3 cisco 2950c switches. These are all on the iOS 12 image. Is it required that I have the iOS version 15 for these switches? Are these switches I bought useless for the CCNA exam study now? Any help…
-
Confused!
So i'm really lost at the moment. I have my CCNA R&S, A+ and Network+. I eventually want to get into network security. I've only done an internship with Cerner Corp. as an "implementation engineer" and that was even before my CCNA R&S. (Got into the program through a connection). Did that for about 9 months without any…
-
Good Simulation Labs
Hi all, What are some good simulation labs closest to the real thing? where can one get them ??
-
Passed 100-101 983
This was my 2nd attempt, in my first I had 790... it took me in 7 weeks in total.. the resources I used was: A course by the learning people (4 courses for £2,000/$3,000, A+ N+ CCNA and MCSA including unlimited retakes on the exams as long as you pass the mock exam by 90%) it includes online support live chat with tutors,…
-
7x CCIEs - Anderson Mota Alves
Wow, this guy must live, sleep, breathe, Cisco...Anderson Mota Alves, 7x CCIE
-
Why does Cisco require IP subnet-zero command?
I was studying for my exam and came across a part in Todd's book that says you need to use the ip subnet-zero command in order to use the first and last subnet in your design. Why? I mean why wouldn't the first and last subnet be available automatically? Its like you buy a house but you need to enter a secret command to…
-
Floating Static Route
Hello All Guys and Gals, I am new to floating static routes. I was wondering if the community would help me with my related issue i am having. I created a static route using ip route 10.10.10.0 255.255.255.0 fa4/0 250 on router A. Router A has a network with 10.10.100.1 and Router C has a network of 10.10.100.2. I need to…
-
Cisco 891-K9 won't pass bootstrap ...no rommon access, no command line access
Hello Guys I'm having an issue with my 891k9, after powering up, all I got is 3 lines of a bootstrap version, and no access to rommon mode at all. I'm not able to type any command, tryied different consols, ctrl+break, reset button, nothing works, it won't boot from usb neither, fan is working on highs speed, and all 8 Fe…
-
Can't ping VLAN Interface
I'm using GNS3. Using layer three switches. I have PC1 connected to SW2 and SW2 connected to SW1. From SW2 I can ping SW1 management VLAN interface, but from PC1 I can't anything. I assure you that all vlans have been added to the database. Any suggestions. hostname PC1 ! ip source-route no ip routing ! ! no ip domain…
-
NAT question
I have being working out an issue with a site to site vpn (which i got resolved) but I still have a question about "how that works" . So I have a local network with say a subnet of 192.168.4.0 /24 and a remote network of 192.168.1.0/24, and I created nat objects on 2 ASA routers that state use the following configurations…
-
Cheap module for 2800
Hello, I just purchased two 2800 routers without serial modules. Do you know what kind of module I should buy and how much its going to cost me.
-
Site to site VPN troubleshooting
Hey all, I'm having a problem with a test site to site vpn lab that I have set up in gns3. I followed a mock of a configuration from this video and I think I have the syntax configured correctly but I cannot get connectivity to work. I feel like it's something to do the nat proccess. I set up network objects for local and…
-
enabling http server on Packet tracer
Having issue with enabling ip http server ,on router 1941 in packet tracer-is it software issue or doing smth wrong.thx
-
Passed CCNA:R&S 200-120 Today !
I started studying about 3-4 months ago, and at that point didn't know a thing about Cisco. This test really was a different beast from any exam I've taken upto this point, I've never felt so great after an exam. I'm taking Security+ next, hopefully in the next coming weeks, hoping to keep my momentum going. I've mostly…
-
ccna 3 project pls help
hello, i don't know where to post my question so please forgive if not the right sub forum - no hate pls i need help from someone. for ccna 3 we need to make a project Design a network for a company that complies to the following specifications: – 3 sites – human resources: 5 people – administration/finance: 30 people –…
-
What would you consider as legacy routers and switches?
Since I haven't had a chance to work in this field I was wondering what you would consider as legacy routers and switches? Like for example any model older then 2XXX ect. This is so I can spot old stuff when I see it. :)
-
If I Configure nothing on a switch interface
and only unshut it. Does it mean it is on vlan 1? If I connect to routers together and unshut the interface with no configuration, is it also vlan 1?
-
Odem Book Error standard ACLs?
I'm sure I'm in the wrong here but I cannot figure out why the following logic would work? Wouldn't the source IP address in the packets from Host 10.1.1.1 have a source IP of S0/0/0 interface on R1 (R1 is the one on the left) therefore not being able to match the cmd in the ACL? pages in the book 615-616 Here is the text…