-
a particularly annoying subnetting question
I was grinding away on Subnettingquestions.com like a champ, and then i got this one: Question: How many subnets and hosts per subnet can you get from the network 172.23.0.0/23? Answer: 128 subnets and 510 hosts I cant even begin to follow the math on this one. I would really appreciate anyone helping me on this one. I…
-
How many exams in CCNA Security Certification?
Is it just 640-554? Or is it that + other exams?
-
Dirty Question
A 24 Port Cisco Catalyst switch is configured with 2 VLANs. Port 1-12 are configured in VLAN2 and 13-24 are configured in VLAN4. The Switch does not have Layer 3 capabilities. How will the switch handle a frame with Source MAC address in VLAN2 and a Destination MAC in VLAN4? (Select the best answer) A. The Switch will…
-
Advise: New ICND2 exam
Hi Guys, Please advise. I wrote my ICND1 back in 2012 before the exam was revised. Now i'm planning to write the new ICND2. Will this be allowed by Cisco? or do i need to write the new ICND1 first.
-
Boson NetSim Problem
Hello, I need help with that sim when i enter any command it tells me incomplete command,i don't know why ? any ideas ?
-
Selling Cisco Vouchers
Vouchers are no longer for sale. Just ran out.
-
Half Way There...Passed ICND1 today!
Early present to myself, passed ICND1 today with a 973, I studied pretty heavily for about 6 weeks straight. I do not have a background in networking but I do touch on some networking task at my work, but nothing equipment related. Study Materials:* Cisco Press Official Certification Guide * Chris Bryant’s CCNA Boot Camp…
-
How to Lab CCNA Data Center?
-
Question from subnettingquestions.com
Question: What is the first valid host on the subnetwork that the node 192.168.141.56/28 belongs to? Answer: 192.168.141.49 So this is bugging me, my answer is 192.168.141.57, and i cant figure out how im wrong. Did they just goof the answer?
-
There isn't IP ADDRESS comand in interface configuration mode on router
Hello I usually use a real router to study but now I have to use posket tracer 6.0.1 ( first time) . When I'am in innterface configuration mode on 2911 router there isn't IP ADDRESS comand . When I check whot commands is possible there isn't also IP command: Router(config)#interface fastEthernet 0/0/0 Router(config-if)#?…
-
ccna access list
Hello All, I was looking for some help, even after getting my ccna i am still weak when it comes to access lists. I am revisiting my ccna material because i got an IT job as well as i want to go to the next level when it comes to certifications. I want to be CCNP certified by the end of 2015. i am going to be pick up the…
-
OSPF over Non-Broadcast Links
Just answered my own question. Moderators please delete this thread with my apologies.
-
Static Default Route
Hi, I'm praticing static default route, I'm using the ip route command R2(config)# ip route xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx Lo1 Just can't work out what IP and subnet mask do I use though? R2 or Lo1? Thanks.
-
Subnetting question
Sorry if this sounds really dumb or anything but I found that subnetting made easy guide and so far so good I'm really catching things but there is this question that messes with my brain What is the valid host range of the 1st subnet of 172.16.0.0/17? So the answer is 172.16.0.1-172.16.127.254? I know it may sound dumb…
-
Question for studying for CCNA exam
Hi Cisco Techs, I am currently studying for the CCNA exam. I have a few questions regarding the CCNA exam. 1) Is it better to take one exam or 2 exams for CCNA? 2)What kind of Cisco Simulator should I download for studying. I like to connect multiple routers and switches and test out the Cisco commands. 3) Is there any…
-
How should one setup a GNS3 lab ?
Hola amigos! I will be attempting the CCENT exam in late feb. I am short on resources to setup a physical(hardware) lab hence I downloaded GNS3. However, I am not sure how to setup GNS3 to get some practical experience in handling the routers and switches. I tried Google but couldn't really follow clearly enough to do it…
-
Wireless exam recommendation.
Hi everyone, I've been away forum for 5 years now I'm getting the certification itch again. I'm interested in taking either the CCNA wireless or the CWNA exam. I already have a few certification under my belt A+, Network +, Security+, MCP & CCNA so I'm looking for something to enhance my skills. Which of the two do you…
-
Material to fill in the CBT Nuggets gaps
Preparing my CCNA Voice, am done with the CBT Nuggets which were fine.. But I still feel that there is a good amount of gaps that need to be filled.. I may pass the exam now, but I don't really find myself having a good understanding of the topics it covers.. So what learning material would you recommend to fill in this…
-
Cotinue to get either Bad Masks Errors or Overlaps With Internfaces
Using Packet Tracer 6.1 and built a simple topology with three routers to bone up on static ip routes. However I continue to get either Bad Masks Errors of Overlaps With Interfaces and can't ping across serial interfaces, even with static route in place. I've also placed pcs attached to each router and can't ping either…
-
I need some advice & Help with a home lab
Hello. First, I'd like to apologize for my post's redundancy; I know this question has been asked a billion times. Also, please forgive any of my ignorance, as I'm still trying to sort things out. I'm currently a full-time (re-entry) student, two quarters away from obtaining my BS in Computer Science. I really want to…
-
Is the access list implemented in interface or IOS?
"sh ip interface" shows "outgoing access list is not set inbound access list is not set" It hints the access list functionality is implemented in the IP interface. It makes sense for the standard access list since the IP interface does process the src IP in the IP header. However, is it the same case for the extended…
-
Can someone help me with my DHCP?
For some reason, i keep getting a error message, ive got a feeling its something obvious but i just cant find it. I get the following errors message. 887VA_TestLab# Feb 6 10:24:42.667: DHCPD: Sending notification of DISCOVER: Feb 6 10:24:42.667: DHCPD: htype 1 chaddr 0021.706e.cc26 Feb 6 10:24:42.667: DHCPD: remote id…
-
Hello i have sine questions just finished reading icnd1 book
Hello everyone I just finished read the book CCENT EXAM 100-101 By Todd Lammle now after I read all that stuff I feel that I need to exercise a lot like ICND1 exams thier is a source that you can give me to this kind of stuff ? I know thier is Exsim-boson exams but they cost to much
-
INE CCNA video training on the super cheap...
I stumbled onto this via reddit/r/ccna threads: $24 bucks vs the normal $300 I watched the first 6 or so videos...seems okay. CCNA Routing & Switching Video Courses - INE
-
error setting up a home voice lab
I'm setting up a voice lab at home. it is a 1760 with cme 4.? the ios is 12.4-15T10. and i'm using the cme for 12.4-15-T. Being work through setting everything up. I get an error message: T17(config-telephony)#create cnf-files Cannot currently create files. Please verify CME configuration or wait until previous file…
-
Sub-interface frame relay nat
Hey all . Why , when you configured frame relay network and you want to use nat , why you have to use sub interface and point to point ? i mean like interface Serial2/0.300 point-to-point ip address 200.0.0.1 255.255.255.0 frame-relay interface-dlci 300ip nat outside
-
Prep for CCNA/CCENT
Hi all, I've enrolled to study the CCNA at a local college part time next year(runs into year after too) but would like to do a little prep work as networking is a weaker area for me to address and progress my career, especially as work is going to be quiet for the next few weeks :) Just to add I want to take this approach…
-
what to use for a wireless bridge
I'm looking to set up a cme router such that some people in a warehouse environment can call each other. But, one of the phones is going on the other side of a cement block wall. So, I'm thinking put a poe switch to connect up the phone and use a wireless bridge to network the switches together. But, you guys know a lot…
-
IOS Upgrade/Module Question
Hi everyone. I trust you all had a good holiday. I have 2 quick questions in regards to my lab kit i just got for a present. 1. how would I go about upgrading to the latest IOS version? Current version is 12.4 2. What serial module would you recommend for my routers? I am hoping to do some DCE/DTE configurations. My lab…
-
GNS3 vs. real equipment
What in this track can be simulated with GNS3 and what has to be the real equipment? I'd like to know in order to estimate costs for an NP:Security lab down the road. Thanks!
-
Installing CM 8.6.2.1 on VMware Workstation
I got the ISO file of the Call Manager 8.6.2.1 I tried to install it on a VMware workstation, but after checking my hardware compatibility a message appears: "The hardware you are using is not supported for this product" and installation halts, I tried the recommended configuration and never managed to get it working Help !
-
Home Lab setup
So I am beginning to setup my home lab for the CCNA so I can start following along with some of the 'hands on' labs in Todd Lammle's book. I have several switches and routers, but am starting on an 1841. I tried using VLSM and am running into a wall. Right now I setup Fa 0/0 192.168.1.1/29 and am trying to set Fa 0/1…
-
CCNA Sec Passing Score
Hi I have my CCNA Sec exam booked for the 22nd Dec. I heard the passing score is 898. Why is it so high? Is it because the exam is easy?? Seems like Cisco leave you little room for error.
-
Scored a 931 on the 200-120 yesterday
Just wanted to let anyone who's pushing to just go the one test route instead of the 2 tests it's very doable. Just study, study, and study some more. Wish any one who is pushing to get their CCNA very best of luck. Later
-
can a switch be a dhcp client?
Can a switch get its ip address and etc. from a dhcp server? A router can obtain an ip address from a dhcp for an interface using ip address dhcp But, when I tried that on 2950 switch it didn't work.
-
OSPF Question
So I put 3 routers in a triangle and setup some ip helpers to dhcp on a remote router. I tried setting area 0 to the inner ring of the 3 routers, with the 3 router outer interfaces on other areas like 1,2, and 3. I just left the serials linking the 3 routers on HDLC and the routing table shows all remote networks so I…
-
Is this CCNA in security worth-while?
Long story short, I recently passed my CCNA R+S. I can tell ICND1 knowledge is "fuzzy"since I never use it at my job and while INCD2 knowledge is still fresh, I was thinking about banging out the CCNA in security in a month before I go for my MCSA. I think it's a decent idea and next year I still want to get the VCP5-DC…
-
Just received some post from Cisco.....
Which only contains a letter saying congratulations for meeting the required for 4011 standard..... so how did everyone else get there results for passing CCNA Security? Thanks
-
Spanning Tree Protocol
1. What is spanning tree protocol and rapid spanning tree protocol 2. What is Redundancy in Spanning Tree Protocol 3. Difference between spanning tree protocol and rapid spanning tree protocol 4. What is root bridge, broadcast storm, Bridge Protocol Data Unit (BPDU) frame, root port, designated port, backup port, Per-VLAN…
-
Ch 4 Packet Tracer Skills Integration Challenge
Hello! Can't set static and default routes at R1, B1-B4 and ISP in Chapter 4 Packet Tracer Skills(( Help me, please! Thanks in advance!
-
Getting into NETWORKING ---- CCNA
Hey All I been looking for a community which will help me along this path and i think i found it. After stalking some post I was ready to make the leap and create an account to ask questions and get suggestions and feedback. So a little about me, I've been in the IT field for about 5 years now, started with help desk 2…
-
CCNA Version 2 track
Hi All, So, as my previous post stated, I am studying to retake my ICND 1 and ICND 2. I took them back in 2011 and foolishly let it expire last month due to time constraints with multitasking a career and personal life. I was just presented with free vouchers to retake the CCNA again hence why my head are back in the…
-
Confirmation on router physical configuration
I'm setting up a home lab for my CCNA 200-120 R & S. I have my switches ( 3 x 3550 24-port) and I'm looking at purchasing my routers now. The hardware configuration that I'm looking at so that I can do all the labs and have the routers ready to do the CCNA security (looking at just the routers for now) is as follows: 3 x…
-
CCNA Voice in 30 days
Hi everyone, Been a little while since I've been active on the site. But I had to make it known that I dropped the ball and got a notice telling me my CCNA's are expiring in Feb. So I've targeted CCNA Voice as my renewal test. I have the privilege of having a CUCM suite and test phones in the office to play with so I'm…
-
Help understanding IOS versions
Very much newbie questions.sorry. I did try finding the answer by speaking to colleagues but couldn't shed any light on it. need some help understanding what IOS versions do what and deciphering what the codes mean. for example, I have c3640-jk9s-mz.124-16.bin which when i run show version gives me filename:…
-
cisco 1760 T5 router for a lab
How do I start this off, not the router which I bought off eBay for 10 whole euro's, but the buying while a bit (lot) tipsy after my best friend's Ma had passed away and I had my first pint of black after 11 yrs after giving it up ( not a great Irishman, my old fella would spin in his grave) .. I don't even know if this…
-
GNS3 ccna route/switch help
I have been using version 0.8.6 of GNS3 and its been good. I dont have my own equipment. Also been doing the old labs from gns3vault and even doing some ccnp ones to practice. Is it worth the upgrade to the new 1.2.1 version of gns3? can switching be done in it? i.e.vlans, vtp, span-tree, etherchannel? any advise on how to…
-
IPv6 - Source address and Destination address during each stage
So, the more I read about IPv6 for my CCNA, the more I get confused. At what point does the host use "::"unspecified address vs its' link local FE80: as source address when it sends out NDP RA (FF02::2) to learn prefix/prefix length from routers? From what I understand after going through the Chapters in the Odom book it…
-
Cisco aironet 1131 no ssid problem
Hi , an error shows that no ssid configured and associated to the radio interface " %DOT11-4-NO_SSID: No SSID configured. Dot11Radio0 not started. " . i can't find the problem !! , i have configured a ssid and the security setting ( authentication type and encryptation ) but the interface still down . the "sh int" command…
-
nat on frame relay
Hello everyone! Can anyone help me configure NAT in frame relay network? i tried and it does not work . this is my configuration : here is picture of the network: http://s12.postimg.org/c7fij02d9/Capture.png if do not work for someone here is direct link: http://postimg.org/image/ggk8l65mh/ #show running config Router left…
-
Taking 640-554 this coming weekend
I saw all of the CBT Nuggets videos, read Barker's Cert Guide, and I've been taking the Boson practice exam. Any hints or tips? After taking the Security+ earlier in the year and the CCNA just recently, it seems like it's just a mix of the two. I'm nervous about such a high passing score. Only certs that I've gotten that…
-
200-101 ICND2 passed
So I failed this a month ago with lan - 73% ip routing - 87 Ip services - 67 troubleshoot - 71 WAN - 63% Today I passed and everything was the same except I got 100 for WAN tech as I made a point to go over frame relay. I have a good knowledge of RSTP and IP routing but man , anyone who gets this cert I have respect for…
-
Revenge is Sweet
I just sat the 640-554 exam for the second time and I crushed it. 97x/1000, previous score was about 130-35 points lower. I used a variation of the CBT Nuggets series,CCNA Security 640-554 Official Cert Guide and LiveLessons Bundle, and some good notes and labs. Never underestimate notes because they will allow you to…
-
Simulation / practice
Good morning, In programming there is the concept of a 'code kata'. You basically solve the same problems over and over to reinforce the theory behind the code you're writing and to commit those to 'muscle memory' if you will. What I want to do is something similar but with using GNS3 or Packet Tracer. I want to have a…
-
Huge headaches with CCP....
I'm having all kinds of problems making this $#@* CCP software work. Here's what I have: Windows 7 | 64-bit Downgraded from IE11 to IE9 (I've added the loopback - 127.0.0.1) Java 1.6.0_21 (also tried Java 1.7.x) I have tried running both IE9 and CCP as admin and as regular user with no change. Right now, when I start CCP,…
-
Failed ICND1. Devastated.
Hi guys, long time lurker of the forum here - this is my first post. I just took the ICND1 exam and didn't even come close to passing. Scored 564/1000. To be honest, I am not even considering retaking it because it was that difficult. Thinking of trying Network + instead. Props to some of you who scored over 900. That's…
-
Sims on current ICND2, any actual configuring?
I'm just wondering, without violating the NDA, can anyone tell me if the ICND2 sims require any actual configuring. I took and passed ICND1 a couple months ago and the sims mostly involved show commands. I didn't have to configure anything. Does anyone know if this is true for the second test, or are the sims more…
-
Designing Network Topolgy
Hi guys, I'm creating a mock up of a network, however I don't have experience of designing networks above 8-20 users such as the practice PT tests and scenarios. I've not done a lot of CCNA level stuff in the past twelve months due to other commitments, but I've decided to do a networking project for university but I'm…
-
ospf/router-id issue
Hello all. I hope this is the right place to post this. I'm using Todd Lammle's book and Cisco packet tracer to learn different skills in networking. The most recent network I'm working on is "OSPF". I have everything completed except that I can't seem to set the "router-id". I've configured an "ospf" for the router…
-
Can't make incoming call to FXS card
Hello guys; I am having problem which means my router can make call for outgoing, but incoming call is not working. Please help me The config is: ! Last configuration change at 11:23:44 GMT Tue Dec 9 2014 by cisco version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec…
-
CCNA track - 640-822 vs 100-101 and 640-816 vs 200-101
Hi All, I had taken the 640-822 and 640-816 in 2011 and passed with flying colors. I let it lapse (expired last month) and now I'm pursuing the new 100-101 and 200-101 track. Yea yea, I know, I'm kicking myself as we speak. I have a boson and cisco press books from the 640 exams that helped me pass, is there a big…
-
Basic ASA question
I've just obtained a Cisco ASA 5505 device from my company (they want me to learn this device). I've setup basic configuration (NAT, VLANS etc), and it worked fine when outside port was connected to the router. When I connected it straight to the modem, it didn't even obtain an IP address from modem DHCP service. It is…
-
Just Passed the ICND2!
After passing the ICND1 back in October, I just passed the ICND2 today with a 1000/1000. If I can do it, so can you!
-
Cisco NAT cannot configure.
Hello, i want to configure NAT static on my router so it can send data to other router. I will try to explain everything here. So i have 2 PC's hooked up to a switch, which is connected to a router1. PC1 IP: 195.10.5.9 PC2 IP: 195.10.5.10 (both masks 255.255.255.12 My router1 eth0/0 is 195.10.5.1 with a 255.255.255.0 mask.…
-
Getting a job in CCNA
I'm looking to get into the IT industry and a job as a network admin so am going to be studying to take my CCNA exam but I'm worried that because I don't have a degree I won't get a job. Is this the case? Would employers expect me to have a a degree? I don't have any job experience in IT apart from my current job where I'm…
-
Subnetting Question
Hi guys, please help me verify these 2 questions and answers. Q: You are a senior network engineer at X Pty Ltd. Your boss, Mr. Martin, asks you to create a subnet with room for 12 IPs for some new managers. Mr. Martin promises that there will never be more than 12 managers, and he asks you to make sure that you conserve…
-
Takng my CCDA on Monday 12/15
HI guys!! It's been a while since I posted any new thread. I'm set to take my CCDA test tomorrow. I've been prepping up for it since last 4 months. I used Cisco Press books & CBT Nuggets videos. There are lot of theories & definations on this test. Only CCNA related material I've seen is Route Summarization. Im starting my…
-
2851 Routers, buy or pass?
We have a local E-waste recycler I've been slumming around lately trying to build a lab for my CCNA. I have the opportunity to purchase four 2851 routers all in good shape. They are untested and I'm not allowed to power them on or come in with a console cable and laptop and tinker... Cheap... I pay just a little over what…
-
Packet Tracer banner motd
Hi there. So, I'm having a problem with an assignment through packet tracer. The assignment says "Banner MOTD for all devices: #Unauthorized Access Is Not Allowed#". But when I enter this through PC0's terminal connected to R1, it still says this is in correct. For clarification, i've type: banner motd #Unauthorized Access…
-
Quick question about borrowed bits...
Hey guys, I'm trying to figure out how many bits I've borrowed from the host...default subnet mask of 255.255.0.0, but I'm using 255.255.192.0 --- The network address given is 182.214.0.0 -- any thoughts? Any help would be extremely appreciated. As I'm having some trouble with this bit borrowing stuff!
-
Subnetting help! Please.
Hello, I am very new to subnetting and I have an assignment due soon. I would be very thankful if someone could help me out with this: I am given the network 158.159.160.0 with a 255.255.255.0 subnet mask. I have to solve for 50 hosts on each subnet including the serial link. So I need to solve to meet the host…
-
IPV6 Subnetting Practice Sites?
Hi All, I'm looking for a website that will allow me to practice ipv6 subnetting questions. I'm referring to questions like eg: 1. Identify the first four /36 address blocks out of 2406:6400::/32 1._____________________ 2._____________________ 3._____________________ 4._____________________ If i can find a website with…
-
College classes are done for the semester now its time to tackle the CCENT again!
Now that my college classes are done with, now its time to tackle the CCENT/CCNA! I plan on taking the CCENT by Jan 9 before my last semester starts. Any advice to get this done with by then. I took it previously with an 801 so I am fairly familiar with the exam setup subnetting etc. It is just more of a time concern. I…
-
Question About BPDU Guard
Hi, I'm studying for the ICND2 exam with Odom Wendell's book, and I've just read something that I wasn't able understand.. In the book says that the command BPDU guard enable should be used whenever the Portfast feature is enabled, because it discards the STP messages. OK understand that part... but then it says that it…
-
Installing and configuring CUCM server
Guys, I'd appreciate if you would help me to do the first steps with CUCM. 1. I successfully installed CUCM 8.6.1 and activated CISCO TFTP service. Where I should upload files to? 1. Активировал на CUCM сервере CISCO TFTP сервис. А куда грузить файлы? 2. When I had CME, the workstation were in 192.168.1.0/24 subnet and IP…
-
studying vlsm with cisco packet tracer
Hi, i'm practicing for an exam using cisco packet tracer. I have a network ( 192.168.0.0/24 ) with 5 VLAN subnets, and various amounts of users. I believe the correct way to break these down is to go by most users to least. In this case I have 30, 14, 5, 5 and 2 users. So if I'm correct in this I will have subnet masks of…
-
Help with router config ?
hello all its my first time here so please escuse me if i posted in the wrong forum! see the attached immage capture from Packet Tracer i need help with the router called TERTIAR (on right side, the one with 192.168.1.1) how do i configure that router so that the PC3 connected to router TERTIAR si able to communicate with…
-
Scheduled ICND1, accountability....
So I took a year away from IT, and recently started a new position. I earned my CCENT back in 2009, and let it lapse. I am scheduled for Dec 22nd at 8:30am. I hopefully will not have to reschedule, as it would be great to get this finished before Christmas, take a break over the holidays, then hit it hard again and towards…
-
How to find the networks in a summarized address?
Hey Guys How do I find the networks in a summarized IP address? I can figure out how to get the summary address for multiple classfull networks. But I cant for the life of me remember how to get the networks that are advertised in a summary address. .. please help lol
-
Question about how multicast frames travel.
So I was restudying IPV6 in ICND1 using Odom's book. I understand Ipv6 has no concept of a broadcast (but it can send to all hosts using a multicast). I understand that this is better since only a subset of NIC's now need to process the equivaled of ipv4's ARP packets (NDP) and bunch of other stuff. But how? What…
-
ccna job /career
Hi guys I have done my electrical engg and recently i came to know about networking . I am thinking about getting in networking .Is it a good career option . And what is scope of ccna . which industries do i need to apply for starting my career in networking . Do i need apply at internet services providers ? Thanks
-
what is considered a layer 4 router
would a layer 4 router have to have special hardware to be considered a layer 4 router or is that just something that is implemented in the ios software. It would seem that layer 4 things are like nat and load balancing. Would something like a 2800 be considered a layer 4 router?
-
Lastest VCE Files
Hi, How can I open the latest VCE files? Is there a crack version of vce player 1.2? EDIT: Just found this website to convert the VCE files to PDF online. www.convertvcetopdf.com Thanks
-
CCENT Problem
Hello Everyone I have a problem ,,I do have all the Videos of [FONT=arial, sans-serif]Jeremy Cioara from CBT Nuggets ..I am almost done with CCENT ...but I heard there a lot of changes on the topics..even the book[/FONT] [FONT=arial, sans-serif] I bought it last year.. any link to the new Topics ,,,I am doing my exam…
-
New CCENT exam
Hi does anyone know when the new CCENT exam comes out? I'm studying for the ICND1 100-101 currently. I just want to remain up to date. Thanks in advance!
-
subnetting question help
I am not sure how the answer to the questions below are correct. Can someone break it down and explain how they arrived at the answer? Question: What is the first valid host on the subnetwork that the node 172.21.67.191/23 belongs to? Answer: 172.21.66.1 Question: How many subnets and hosts per subnet can you get from the…
-
EIGRP and IGRP
- Basically I want to know what different between eigrp and igrp? - what is eigrp and igrp and how it's work. - How autonomous system work in eigrp and igrp?
-
Wireshark Help, Creative Ideas?
I have a small home network that I would like to analyze traffic on. I have wire shark installed on PC “A” and want to monitor unicast traffic on PC “B” and “C” also connected to the home wireless router. In its current state I can see all broadcast traffic on the net. I know that in order to acquire unicast I will have to…
-
Confused with Standard ip access list
I created an access list using Todd's lammle's book for ICND1 but I am confused... it is access-list 10 permit 192.168.20.2, it had me place it on one of my routers going out on the other network. if anyone has his routing and switch book i am doing hands on lab 12.1 this access list is supposed to only allow packets from…
-
please help verify my answer to this question
so I have this question, and want to make sure I got the right answer here see attached photo. I believe the natpool is exhausted?
-
CCNA Lab-- I want to build CCNA lab at home
I want to build CCNA lab at home but i don't know how many router or switch i need. I have 3 cisco router 1800 series and i may have to buy a switch online but how many do i need for the Lab. Please advice or where can i find instruction for the CCNA lab or how to practice on my own lab. Thank Guys !!!
-
Autonegotiation
Why is it that the books insist that Auto-negotiation always works but in real world, it probably works at may be 70% at best especially where a 10/100 mbps port is concerned.
-
Official Cert Guide - Academy Edition Ebook
Anyone know where I can rent the Ebook for ICND2? I bought the local Indian Edition Paperback (The Official Cert Guide). But I liked the academy Edition while preparing for ICND1 so was wondering if I can rent one.
-
Paying for Cisco Exam-Paypal Accepted?
I searched through the forums and found the posts about vouchers, so I know I can use Paypal to cover my MCSA exams, but what about the ICND1 and ICND2? Can I pay for those with Paypal? I couldn't find a reputable voucher site that offered a significant enough discount to make it worthwile for Cisco exams, so I'm thinking…
-
Passed ICND1 !!!
As mentioned, I took my exam today. Was a bit worried about weird questions, but did pretty OK I guess 933/1000 I have only 3 words to say about the exam : 1. Frames 2. OSPF 3. Subnetting They have this clause on the paper about verifying if the attempt is genuine. I didn't even touch the laminated board I was given. I…
-
Boson sim software question
I am trying to get my Bosen software to give me only lab sims and drag and drop sims and no other types of questions. Has anyone managed to do this with the Boson software ? Please advise
-
VLSM Question
I am a little confused when it comes to VLSM. Will someone go through the process of explaining why the answer to the question below should be /27 and not /26? The question is asking for 20 hosts, so I thought that you borrow 5 bits from the original /21 (2 to the power of 5 is 32, then subtract 2 to get 30 hosts). Thanks…
-
Failed CCNA Composite
Hello TE, I had to reschedule my CCNA from Wednesday to Thursday for work reasons which was fine with me. However I ended up failing the exam when I took it. I got a 740, so I was not too far off the passing mark.... There were several circumstances that I think hurt me. The day before the exam I had someone close end up…
-
Help on assigning IP address
the instruction says : -Configure the FastEthernet 0/0 ports of R1 using the first address in the range for the networks listed. Configure the FastEthernet 0/1 ports of R1 with the second address in the range for the networks listed in the topology. Now here is the situation : 1. When I read the instruction at first I put…
-
When to save config?
On switches and routers. What specific settings are stored in nvram or flash by default? I think the vlan config is safe....I'm just wondering if it is best practice to write memory every night before I shutdown my lab? Thanks!