-
Passed 640-802...barely and on the last day....
Hi all, I know I've been posting and talking here and there about my CCNA studies and how I planned to test on the last day, 30 Sep 13...well I thought I'd just share my experience since I've always liked reading this types of posts and they give some insight into the testing experience. I showed up at 1120 to sing in for…
-
ASA-5505 behind a Cisco Router
Hello, after days of struggle, devices connected to the Cisco router finally have access to internet! Now I'm trying to put ASA-5505 behind this Cisco router. Since ASA-5505 also can act as a semi-router/switch, I've been trying to have devices connected to the ASA have access to internet as well. But so far, I have…
-
Cisco discovery course question
I just started taking the Cisco Discovery Networking I class this semester. There is a lot of content but it all seems pretty basic. So I was wondering if anyone who has taken the course could give me an idea of what to expect in Networking II, III and IV. I expect that the first course is more of introduction and that the…
-
VPN and ASA
So for both personal use and 640-554 test, Would a system including one IOS-operated Router and one ASA appliance allow me to build a VPN? And connect it to it using Cisco Easy VPN client? Thanks.
-
Need help big time making internet out of Comcast/AT&T
Hello, I've been CCNA certified for 5 months. Just got a CISCO891-K9 RT and trying to get WAN off ISPs like Comcast Xfinity / AT&T U-Verse. These ISPs provide a modem+router equipment that does both WAN and wireless access point (DHCP as well). I'm trying to feed one of LAN off of ISP routers to my CISCO router as a WAN.…
-
Passed ICND2 before the final bell
Just took the test yesterday and passed. Scored an 888. It was tough. About halfway through I was sitting there thinking there is no way I was passing. Funny thing is that on the break down, I got 100%s on the two areas that I thought I was going to do bad on. Last night I studied nothing. It felt nice. Now on to my next…
-
Better or quicker way to connect to console ports?
Afternoon, Is there a quicker way of connecting to the console ports of the cisco switches/routers? At the moment i'm playing around with the different routing protocols but its a pain in the a55 connecting/disconnecting the console cable from one hardware to another when i need to access the hardware direct. Jeremy uses…
-
How Isp works
hi Dear users i have one question about connection of ISP. how an ISP connects us to the rest of the world.can anybody explain it or share any link. and 2nd part of the question is this that when we are connected to the isp through a adsl (router/modem).this connection between me and my ISP in which category of networking…
-
CCDA Exam Passing score?
I am trying to find the answer to this, but am striking out. Call me dumb, but what is the passing score for the CCDA exam? Thanks
-
Failed CCNA Security/ changing gears and vendors
Failed the 640-554 today. I scored 794 and needed an 804 to pass. Surprisingly, I'm not really bummed about it. I studied for 3 weeks and I almost passed it. I am disappointed with the exam having GUI based exam questions since most configs are done from cli. I've done firewalls, Nat's, even some vpn. I don't want to waste…
-
CCNA Sec - No card with certificate?
Hello All, I just received my certificate in the mail and was surprised to find that there wasn't a card with the certificate. Do they not send them for the specialization tracks or did they mess up and not include it? Thanks
-
Failed ICND2 - twice.
Hi Everyone, I failed ICND2 today, the old version, on the last day available. The testing facility was a mad house and overbooked. My test started over an hour late. But thats not why i failed. I got a 760. Needed 825. Back in May I failed badly, 600. So i showed a lot of improvement, but needed to do better. I still…
-
Lab Exercise for Ethernet Switching
Where can I find a good lab exercise that corresponds to the PART 2 - Ethernet Lan Switching concepts of Odom Wendell's book? It should include Password setting, MAC addressing, VLANs, and Port security.
-
EIGRP Trouble shooting question help
The scenario is that I cant get my router to receive EIGRP routes from other routers in my topology. My router in question is in the right AS system, all my interfaces are up, up that should be. I have advertised the right networks, no auto summary command has been issued and there are no passive interfaces. I can ping the…
-
new to CCNA security , need some pointer as to where I can get the simulations test
I want to take CCNA security. However, I am kinda confused as to where to begin studying in a sense that when I can't / haven't yet to find the proper simulation question for practice. I have gotten the CCNA security ver 1,1 ( flash version) , but when I skimmed through the entire chapter , I cannot find packet tracer…
-
How much tougher is the new ICND2?
I'm considering waiting until earlier next year to take the ICND2 exam, (personal issues preventing time from studying). I already passed the ICND1 so I was just wondering whether it's much tougher than the old ICND2?
-
ICND2 Pass
Just took ICND2 and passed with a 986. Almost positive the question I missed was related to OSPF. Going to dive straight into CCNP next. If anyone is doing any last minute studying I'd brush up on Frame Relay.
-
What is the go-to book for this exam?
I've completed CCNA and now want to pursue the security track. Any nudges in the right direction would be appreciated.
-
Feeling deflated!
So I failed the 640-802 for the 3rd time today.Original test was on the 09/09/13 and scored 749, second test was on the 23/09/13 and scored 801, todays test was on the 30/09/13 and I scored 788. I feel like an idiot for failing 3 times, but the time frames were very short between tests, this was because the exam expires…
-
GNS3 Question...
I am unable to setup internet access from GNS3 in Windows 8. I tried in Windows 7 and it works perfectly, so I must be doing the loopback and everything correct. I find people having this issue with Windows 8 and I also tried some alternate approaches suggested. But none of them working. If you have an answer I would very…
-
Router boot sequence with CCE
I think this is a CCNA related topic but not 100% please correct me if im wrong. After passing CCNA ive led to believe that the router boot sequence is as follows: 1 -- Bootstrap program (ROMmon) in ROM runs a POST 2 -- Bootstrap then attemps to load IOS from flash to RAM, 2.1 - If no IOS found, it will broadcast for a…
-
Port security Confusion
Port security allows to restriction to the LAN. So, we are setting a restriction on the port of an interface like for example FastEthernet 0/1 which connects to PC1. When I set using port-security "switch port-security maximum 5120", I am allowing a maximum of 5120 MAC addresses to at a time right? So am I correct in…
-
Cisco 881 - Traffic Shape / Police
Not sure if this is the best thread but curious if anyone has tried this. Currently I have a Cisco 881 setup as the "Core" router, connected to FA0 / VLAN 100 is a Cisco 871 and connected to FA1 / VLAN 200 is a cheap Linksys Router "Home Network". I have everything up and going fine, 881 connects via PPPoE, and all devices…
-
So who else is cramming this weekend before the deadline?
I've got ICND2 at 11:15am on Monday. I'm feeling so so at the moment. I just have to hit my weak spots over the weekend. How is everyone else doing before the deadline? Do you feel ready?
-
Failed CCNA 640-802 today!!
Failed CCNA 802 today!!! 590/825 Started studying for the exam on 5th Sept. After no exposure to CCNA material for over 6 years. Do you think I left too little time to study for the exam? I was hoping to do the exam before it expired. Used Lammle's Sybex book Past CCNA exam papers for reference Any ideas on what I should…
-
passed icnd2!!
Got a 902. Definitely did not expect to do that well especially when I got a god damn sim on my last question with 10 minutes left!! Fortunately it worked out though. These forums helped me a lot so this is my thank you! Doubt I'm going to pursue the CCNP being that I'm still helpdesk, probably looking at the MCSA, CCNA…
-
Access Interface
Could someone give an example for my understanding, as to when access interface would be needed. Access interface - Non trunking interface assigned to VLAN.
-
ICND2 failed. fresh
818. I guess it's just one right click away. I was not ready, but just to take the chance before the new CCNA. The sim is more complex than I expected, and the time is at least 10 min shorter than I need... It seems like the new CCNA has only one option, the composite, which means my ICND1 is nothing. Will I get some…
-
CCENT Question
Hey Guys, Just a quick question i noticed on the Pearson Practice test that confused me and im sure this is wrong? Which two characteristics describe the access layer of the hierarchical network design model? (choose two) A. Layer 3 support B. Port Security C. Redundant Components D. VLANs E. PoE Now i know for a fact the…
-
Earned CCENT
I have been viewing techexams as a whole for over a year now and I have to say you have a great community here. It has been very inspirational to read all of your stories on becoming certified. I am happy to have finally joined in becoming certified as well by passing ICND1 yesterday . I studied on and off for a while but…
-
Which way to go with CCNA?
I am debating which way to go with CCNA. I am wondering if it is better just to jump right into the CCNA 200-120 than to take both the ICND 1 100-101 and the ICND 2 200-101? any advice or suggestions?
-
Upgrading router memory
I have a couple 1841's I need to put more memory in. My question is, do I have to use a specific brand? the slots look the same as laptop memory. I notice the slots are empty so I assume the 128mb on the router now is onboard. If I add memory does it disable the onboard memory?
-
What to look for when buying an ASA 5505?
In terms of licensing and what not. what are some things to make sure to have when buying an ASA 5505
-
Can anyone help troubleshoot this Packet Tracer problem
Packet Tracer file: https://www.dropbox.com/s/wp760ym8bbonml3/E4_PTAct_8_4_6%20Application%20Layer%20Troubleshooting%20incomplete.pka PDF instruction if it's any help to you: https://www.dropbox.com/s/92l78yqbakrn0kc/E4_PTAct_8_4_6%20Application%20Layer%20Troubleshooting.pdf Thanks.
-
native Vlans
Need help. Just been practicing for my exams, using Pearson test practice. There is a question about vlans and configuring a router connected to a switch, with 2 vlans. The answer given is that the physical interface can be used as the native vlan, so you will only need 1 subinterface on the router. Is that right? I…
-
Icnd 2 640-816
Took the icnd 2 today and screwed up big time due to poor time management. Only completed two-thirds of the exam. Need tips on completing the exam. I am comfortable with the concepts, but questions with exibits and scenario takes too long to figure out for me. Thanks guys
-
Ccna failed
SO i took my ccna 840 602 today and failed with a score of 804
-
How much of ICND1 is practice/labbing and how much is memorization?
CompTIA exams have a lot of "What does XYZ stand for?" Is there a lot that on Cisco exams, or is it mostly simulated labs?
-
Is IPSec setup for VPN required for CCNA 640-822?
The Cisco Netacademy chapter I read on VPN and IPSec (Level 4 WAN, Chapter 6 Teleworker Services) was all theories. There was no router configuration commands mentioned at all. Am I supposed to know how to set up IPSec for VPN access on a router for 640-822? TIA.
-
Restore router OS With FTP or Xmodem?
The NetAcademy material talks about restore the IOS by copying it from a ftp site through an Ethernet cable, or copy it with an Xmodem. I think these are very old and slow method. Are there new, faster and more convenient way to to restore the ISO to a router nowadays?
-
CCDA Friday
Been away from this forum for awhile.... Well it's here.. I'm going to take the CCDA exam this Friday. I actually have already passed the ARCH exam around June of this year. Had to renew my CCNP and didn't see paying $200 to just re-take one of the CCNP level exams when I could expand out and use my money wisely. So I took…
-
Do we ever configure a static route with AD of 255?
As far as the old CCNA cert goes, I hope I'm not going overboard with this question. If an AD of 255 means it's unreachable and can't be believed, do we ever need to configure a route with an AD of 255? Ex: R2(config)#ip route 10.55.10.0 255.255.255.0 10.62.21.1 255
-
Today i passed the new CCNA exam (200-120)
I studied for about 2 months and a half, and i attended CCNA bootcamp here in Mexico, It was no difficult for me, the labs were pretty easy and so do the questions. i have heard people say that the old exam is more difficult than this one.. finally i got 9xx. Cheers!
-
Passed CCNA new Syllabus 200-120 with 1000/1000 today
After 6 years of writing CCNA 640-801,Today i rewrite CCNA 200-120 and got full mark :)
-
Advice please / ICND2 rant
Hello all! I was wondering if you guys would offer me some advice on the ICDN2 exam. This exam has been a nightmare for me from the get go. My goal was to become CCNA certified doing a self study and working full time (not in computers) for the least amount of money possible. I have taken the exam 4 times now (in a sense).…
-
HELP PLEASE! trying to connect 2 1760 routers via WID 1DSU T1 cards
....and having no luck i'm trying to do the most basic setup ever and i've triple checked the cables. can't get either router to ping each other for the life of me. definitely set a clock rate on the right end, but i think it has something to do with the cards themselves - what kind of setup is there on these and what…
-
Ccent 100-101
Hey guys, are there a lot of subnetting questions on this exam? How complex are they? Thank You
-
Passed ICND2 Today!
I passed the 640-816 ICND2 Exam today!!! I used CBT Nuggets, INE and the OCG (Odoms book). I also used a home lab as well as packet tracer. The forums here were a great help and motivator.
-
ICND2: 640-816 pass!
I had to make thread for this as I wouldn't feel like I really passed until did. This is the toughest certification I've completed yet and hanging around these forums helps keep goals in mind. This was not an easy test and I'll admit that I did fail on my first try. On my second try with more studying on frame relay and…
-
How to connect to Aux port and what can I do there?
<deleted> Sorry all. My answer found and question deleted.
-
Need to purchase real equipment
I've decided to purchase a Swtich and a Router probably from the used market down here for my practical purpose. I currently lack knowledge about the model and other stuff that I should be looking for before buying. Suggestions?
-
What's a good extension book for the new R/S exam?
I've decided to wait and take the new test. What a good book covering the new material for the new test for someone with a decent background in the content for the expiring test. Gosh that was worded weirdly.
-
What is this Equipment I'm using to connect to the ISP?
SO I have a wireless router that connects to the equipment in the image below. The box has 4 LEDs for Telephone, 1 LED for VoIP, 4 for LAN, 1 for Auth and 1 for Link and power. So what is this equipment my routers connecting to to connect to the ISP?
-
Is it possible to configure an ip route on a layer 2 switch?
I know layer 3 switch can function as a router. But do we ever, or is it possible to, set up a route or a default gateway on a level 2 switch? If yes, how is it done?
-
Failed 640-822 Feedback appreciated
I just got back from taking my test in Philadelphia and I am frustrated. I REALLY studied for this test. Here is the Break down. Describe the operation of data networks 86% Implement a small switched network 36% Implement an IP addressing scheme and IP services to meet network requirements for a small branched office. 58%…
-
Console, aux, and vty. Are they all TTY?
When I issue "show line", it lists all hardware ports. Go by the output, it seems to me CTY, AUX, and VTY are just different types of TTY. The TTY number goes to 21, with 2 to 4 missing. However, when I issue "show line tty ?", it says only 1 to 4 are allowed. What if I want to look tty 21 from the "show line" list?…
-
CCENT-640-822 a prerequisite now?
I passed 640-822 a couple of weeks ago but don't think I'm going to have time to get my 640-816 in before 9/30 I was just looking at the ccna security prerequisites and it looks like CCENT 640-822 is all that's needed now. Is that correct?
-
IPsec Tunnel Help
Everyone - I was just doing a little lab work involving creating an IPsec tunnels. However, I cannot get the tunnel to come up. I went over the basic configs and cant figure out what I am missing. Would you all please take a look? Router 1 is a Cisco 2811 with IOS 15.1.4M7 Router 2 is a Cisco 1841 with IOS 15.1.4M7 Router…
-
Regarding password
I came across this question. Which of the following is true regarding passwords on a Cisco Router and/or Switch? a. You can decrypt passwords using the “no service encryption” command. b. The password “cisco” is all you’ll ever need. c. Type 5 Passwords are uncrackable. d. Type 7 passwords are uncrackable. I think none of…
-
Network simulator
Hi guys, I want to ask if the network simulator(Lite edition) that comes with wendell odoms book 100-101 is enough for labbing. Or do we have to purchase the full edition from pearson vue to be prepared for the exam? thanks!
-
STP Ports on 2 switches?
If say I have 2 switches that are equal priority connected via 2 equal speed connections, how does the non root bridge switch decide which port is blocking and which is the root port? Because I know it will have the higher mac, but how does it decide on the ports between just the two? From testing im inclined to say it…
-
Does the order of IP routes matter?
This Cisco page linked here shows the following IP routes. Configuring a Gateway of Last Resort Using IP Commands - Cisco Systems . When I duplicate the network in Packet Tracer, I notice the 131.108.0.0/24 route come ahead of 161.44.0.0 route. How does this happen? Does the route order affect anything? Gateway of last…
-
640-822 tomorrow: last suggestions?
I know it is always the same question, but i feel a little...scary :D I will go tomorrow afternoon to take ICDN1 640-822...i think i studied well all topics, used Odom book, ccent for dummies e and CBT Nuggets. In this last week before the exam i read also CCENT Exam Cram. Shoot me the last advices before the great day :D…
-
Practice Exam Question...
For the ICND2 I have been using measure up until this week when I bought a Boson 150 question practice exam and holy crap!! Before I felt like I had a good working knowledge of the ICND2 and the Boson exam has made me feel inept. The questions take quite a bit of time to answer as well... Does the Boson more accurately…
-
STP Question
Just want to clarify something, when STP put's a port into block state, does it do so on incoming traffic, outgoing traffic or both? I was kind of thinking that the block states were determined after the broadcast had been sent out and would only block on incoming traffic to prevent the constant loops. From the way the…
-
Cisco Netspace
For those of you that went through the academy, how long did it take to get your content moved over to the new site? I requested my content in July and it's still not accessible. I am not happy with Cisco at the moment.
-
switch management interface access
configure a management interface on a switch to be vlan2. If i connect to this admin interface from a port in VLAN 1 on the same switch, will the request go directly to this mgmt interface, or, will it be routed out then back to the mgmt interface since they're in different VLAN?
-
Passed CCNA-Security
Passed CCNA-Security, took alot of configuration practice on ISR router both through CLI and CCP.
-
Passed 640-816
I'm sure there will lots of these this week due to the deadline, but I'm super pumped! Scored a 902, I thought it was easier than ICND1, but maybe because I knew this material a bit better. I used CBT Nuggets, INE and Odoms book. I also used a home lab as well as packet tracer. Now the question is what's next? I'm thinking…
-
Passed the ICND2.Finally...
I just did it. Failed the first time with 800 points. I passed it with 850points. First exam I was like Wan, IP scheme 100% and 85% switching and 30% nat and acl,and 45% on routing. This time.I did 80& switching, &90 IP scheme, 87% routing 80% NAT ACL and 67% on WAN. I focused on IPv6 ACL and Routing, i messed up the wan…
-
Common things to look for when troubleshooting different protocols
Hello. I'm just trying to memorizedifferent things to look for to trouble shoot common problems so that when Ihit the Sims in the test I can hopefully find the problem quickly. Here’s whatI am thinking below, please add to the list for any problems that may crop upin the CCNA exam. OSPF Area mismatch Wrong network…
-
Access Server Feedback
Hi Folks, I'm looking to get some opinions on access server options. What are you using? What's the best deal going? I have an older 3600 series router I'm not using and thinking of using that, but it's big and an NM 16-A is going to run me $250 or so. the Digi CM32's are going for $350 right now. A 2511 is going to be…
-
explanation for the question
What is the first valid host on the subnetwork that the node 172.20.209.85/20 belongs to? Answer: 172.20.208.1 is there any possible method to find this ans
-
Icnd2- just cleared!!!!!!
I could not be more happier!! I had to jump around in joy when I walked out to my car!!! Wooo Hoooo...Good luck to those who are currently pursuing it. My thoughts on the exam? Read the Odom cover to cover and LAB LAB LAB LAB LAB and you will surely do well! I used the chris bryant videos too but nothing is more thorough…
-
When to start labs?
I'm using Odom Wendell's book as my primary reference. I have just started chapter 7, which is Installing and Operating Cisco LAN switches. What I want to know is when should I start with the labs? Is it going to come later as I go on with book? Is Wendell or whichever other author I use, going to ask us to start with the…
-
erase flash: and erase nvram:
I have the following question and I can't the answer out. On one hand, 'erase nvram:' deletes the start config and the router boots in its default setting. But any certificates wouldn't be located in nvram. That's where we keep OS file and other files. Maybe even certificates, whatever certificates the question refers to.…
-
Just great...feedback please
I will not be able to take the old ICND1 exam by 9/30 bc Pearson Accomodations could not get their act together. That being said, I have to study for the new 100-101. How much different is it from the old exam? Harder?
-
Any online CCNA simulation question?
A lot of test takers said the simulation questions are the hardest ones. And I have no clue how they can be. Are there any online simulation questions that I can try out?
-
Failed the 604-802 - Advice please
Hello,Last night I failed the composite exam, I scored 801. I was pretty close! The only reason I failed was because of time pressure, my last sim I did I had to cut short as I had hardly any time left and lots of questions left, im sure I could of got it working but I just didn't have enough time! It also meant I had to…
-
My study notes...feedback appreciated
I compiled these notes over the last 5 months...feel free to make changes/provide feedback. ICND1 oriented. https://docs.google.com/file/d/0B3W1qBgcEKFAMXViWXNGTjEzeTA/edit?usp=sharing
-
What is "proto=89" in this IP packet debug output?
What is "proto=89" in this IP packet debug output? IP: s=172.16.22.1 (FastEthernet0/0), d=224.0.0.5, len 72, rcvd 0, proto=89
-
trouble setting up Vlan routing:- cant ping pc from switch
im trying to set up switch to start vlan routing i can ping pc1 to pc2 and vice versa but i cant ping switch to pc or pc to switch switch is 2960-24TT show data as follows (ignore vlan1 as only using vlan 10 and 20) pc1 is plugged in to fe0/1 with ip 10.0.0.10/24 and pc 2 is in fe0/2 with ip 10.0.0.11/24 pc2 will change to…
-
Vm ware
Hey i want to do ccna r&s.. after completion of ccna i am thinking to do vmware.. is it ok to go with vmware.?
-
I lost privilege to global config mode
While I was playing with the privilege command, I entered: Router(config)#user john privilege 3 pass mypass And that was the only user I set up. But it seems what I did was not only setting up just one user, but also taking away my usual level 15 privilege to do "config t" without a password. Now when I log in to the…
-
640-816. CCNA. Done
I finally took the ICND2 this morning. I passed but only with a 888. I was much more nervous on this one than the ICND1. It was as tough as I thought it would be. And I used up most of the time as well. I had maybe 15-20 minutes left at the end and was dreading getting another scenario at the end. Fortunately I did not.…
-
200-101 ICND2 Question
Hey Guys, Just a quick question; I Passed the 640-822 ICND1 exam last year and managed to achieve my CCENT. I am now looking to go on and sit the CCNA exam; I understand that the last day to sit 640-816 exam ins the 30th of this month. I was just wondering as I have passed the ICDN1 exam already, do I meet the the…
-
Failed 640-822 ICND1
Hi guys, I've failed ICND1 for the second time again today . Please could someone help me as I am lost on what to focus on; The first time I took the exam I got the following: Score: 650 Describe the operation of data networks 43% Implement a small switched network 43% Implement an ip addressing scheme 75% Implement a…
-
How does the real exam compare to the Free CCNA Workbook practice exam?
How does the real exam compare to the Free CCNA Workbook practice exam at the link below? CCNA Practice Exam | Free CCNA Workbook I passed this practice exam at 840. It states its passing score is 825. When I took the exam, I was not 100% sure of many questions, but often they are the material that I've read before. So I…
-
CCNA guidance
I want to take exam in january. so.. i am practicing on packet tracer 6 and also practicing in online for subnetting.. i want to get prepared my self thoroughly with theory.. i have Todd lamle 6th edition and Cisco press CCNA 1 & 2.. CAN YOU PLEASE HELP ME SUGGESTING MORE BOOKS SO THAT I CAN INCREASE MY KNOWLEDGE IN…
-
Passed ICND1 640-822! My thoughts on strategy and costs.
I passed the CCENT 640-822 exam today and wanted to thank everyone who helped me answer questions on these forums. Reading your comments about passing, failing or otherwise just really helped me hang on to the networking "bug". I've come to really enjoy the material I've learned. I wanted to share what study materials I…
-
Icnd 100-101
Hello guys. Just wondering if we need an actual lab to get through the ccent the new exam? what other alternatives are out there to learn the Cisco IOS and what is needed for the exam?
-
Is the 200-101 easier than 640-816 ?
I´m gonna take the 640-846, but now i see the 200-101 and it looks easier, am i right if a say in the 200-101 there aren´t acces-list? Thanks
-
1841 router
Hey guys I am looking at doing ccna sec. And have a few question about hardware I have an 1841 that I got from work over a year ago. Would that be good enough for ccna sec and if so what iOS image would I need Also I would prefer to use hardware and not gns3.
-
Studying for 200-101 Questions
Hey everyone, I tried my hand at the old ICND2 back in early July and scored a 738. Since then I've studied a bit off and on but really haven't cared. Now its mid September and I know the "old" ICND2 goes away in a week so I'm going to just focus on the 200-101 as I don't want cram for the next week and try and most likely…
-
HELP...EIGRP issue?
so here is a quick diagram of my lab i just configured. i have a feeling my ip addressing scheme is incorrect which is causing this? ALSO...i think it has something to do with my IOS versions that is not allowing me to put a wildcard masks on my network statements. i am getting this error on Router 2: *Mar 1 00:48:33.199:…
-
3 hours till Testing, 640-822...
Cutting down to the wire now, just a few more hours until the moment of truth... This will be the first time I will be taking a Cisco test and I don't know what to really expect. Can honestly say that I am more excited then I am nervous, hope the last month of craming will pay off, thou I have learned a lot. Just felt like…
-
Whooo Passed ICND2 !!
Took the exam today and passed with 944 :D , i was trying to kill before 30 sept and finally did it :D .. its easy if you really know the concepts that's what i learned from this site, i wanna thank all the members, for the encouragement and motivation ... Studied CBT Nuggets (Jeremy he is really a star) Todd Lammle CCNA…
-
Passed CCENT ICND100-101 today!
6 weeks of solid study time paid off 907/1000! Used Sybex CCENT Study Guide: Exam 100-101 (ICND1) and a lot of PacketTracer time. [h=1][/h]
-
What do you guys think of CCNA Service Provider Operations?
CCNA Service Provider Operations Certification Cisco Certified Network Associate in Service Provider Operations (CCNA SP Operations) validates basic knowledge and skills (of a Tier I support engineer) in a prescriptive troubleshooting environment within carrier class IP NGN core network infrastructure. CCNA SP Operations…
-
5day calculation
Hi All Just want to clarify the whole 5day waiting period to re-sit exams. I am planning on sitting my CCNA 640-802 on Tuesday, if all goes well i won't have to sit it again, but if i do fail the earliest i can take it is on Monday? I am going off this chart by Cisco Exam re-take policy Regards