-
frame relay serial links
I am trying to construct a point to point frame relay network on packet tracer on subinterfaceshowever, they are coming to be doen/downwhat couldd be the cause?
-
Designated Routers
Hi there folks :) I have a question regarding OSPF... How many DRs can there be in one Area?
-
What patch cables do I need?
I am planning on on buying two 3640 routers and a 2950 switch to start. I guess I need to buy two patch cables as well? (also the crossover cable)... AS far as patch cables goes here are my two options, does it matter? MTRJ to SC Fiber Cable Cisco SC-MTRJ Multimode Duplex Fiber Patch Cable, 1M Qty: MTRJ to ST Fiber Cable…
-
Thinking of passing ICND2
ICND2 focus on routing part including EIGRP/OSPF. However, I feel the material in CCNA books regarding these two subjects are kinda shallow. Is it a good idea to delve a little on CCNP to boost understanding these two routing protocols? If so, any good CCNP material recommendation?
-
INE CCNA Video Material
After browsing Google for some time I stumbled upon INE which from what I have read seems to be the leading CCIE training provider. I then found, after browsing though their website that the CCNA video material is free for a limited time. I don't know how long this limited time is or if it is as good as it says as I am…
-
ICND1 Question Options
Hi, Do the questions in the real exam tell you how many answers it is looking for (eg Choose two answers)? The books DIKTA questions sometime do and sometimes dont but the practice exams dont. Also if on one question you get 2 out of 3 answers correct do you still get 2 marks (or however they score it) or is that a big fat…
-
ICND2 - pass. What is next?
Yesterday passes ICND2, score 958. Its a huge stone rolled off my back. But what to do next? Possibly I will start looing for a network technician or similar jobs. But CCNA doesn't guarantee I will get it. As I look for a decent jobs, needs Linux, MySQL and loads of other experience, knowledge and plus usually programming…
-
Problem in Final Lab on CCNA3 Discovery
I am currently part way through a lab provided in the CCNA3 course material that requires you to set up a network covering most of the topics covered in CCNA3 such as stp, vlans, ppp, ospf ect. I am now at the point of configuring PAT on the "HQ" router that sits between the LAN router and the ISP's router. My issue is…
-
WOOT! Passed ICND-2!!!
Third time's the charm! Finally knocked out the ICND-2. Study materials were: Odom's ICND-2 Book Chris Bryant's CCNA videos Boson Exam Simulator Live equipment Thanks to everyone's advice and support (especially those recommending to use the Boson Exam Simulator). I still felt really pressed for time but did not "rush"…
-
Best way to prepare for CCENT/CCNA questions ?
What did you do to prepare for simulation questions, just study the sims from www.****.com ? Did you run any real time simulations ?
-
I need help with ACL
I´m doing the exercises from Wendell Odom ICND2 book, at the chapter 7 the question 6 says: Which of the following access-list commands matches all packets in the range of addresses in subnet 172.16.5.0/25? a. access-list 1 permit 172.16.0.5 0.0.255.0 b. access-list 1 permit 172.16.4.0 0.0.1.255 c. access-list 1 permit…
-
VLAN Names
When creating the same VLAN, e.g VLAN 150, across a load of switches, does the name have to match across the switches, or is this just a descriptor on the switches to help identify what the VLAN is? Thanks
-
Cisco 2900 series routers with Cisco VPN client
Hi All, Anybody know if the new cisco 2900 series can utilize the use of Cisco VPN client for remote access? I noticed they are talking a lot about easy-vpn, but I just want to use the old cisco vpn client if possible. Anyone with any experiences here? Pash
-
Problem configuring 'Key chain' for EIGRP on Packet Tracer
I am not sure if this is an issue with myself or Packet Tracer. I have configured EIGRP on three routers all in the autonomous system '100'. When I try to enter the 'Key chain command in golobal configuration mode it will not recognize the command. It will not even recognize any command starting with 'K'. Could someone…
-
Practices like (Boson, Transcender) Vs. Actual
Are practices like (Boson, Transcender) easier, just as hard or harder than the actual exam? I thought I knew most but Boson is killing my confidence. I wonder if anyone failed the practice exams but still passed the actual one. Thanks.
-
CCNA Voice official course
Hello guys ! Can you tell me if Cisco offer official training courses ? i want to attend to a CCNA Voice class i'm wondering if they have official courses just like for CCNA....And if the answer it's yes can you tell the name? Thx !
-
connecting an AP to a switch, which cable?
which cable would be required to connect an AP to a switch? is it a straight-through cable?
-
Simple subnetting help please, Class C network...
So I'm going to be doing this skills exam next week, and I'm still not sure how things change if variables in the problem change. Basically, I have a network of 192.168.1.0/24, and I have worked through most of the questions (see attachment IMG_0018_ed.jpg) My main question is, and I'm sure I'm missing something simple;…
-
Passed ICND 1 today!
Test was at 10 am, took the day from work to do it. Spent 30 mins going over my notes and 15 mins to relax and calm my nerves. got in the testing room did my powers of 2 at top of sheet and wrote in my private ip addresses during the tutorials. did one final stretch and started my test. It's amazing how nerves can cause…
-
Christmas came early.............CCNA!
As I stated in my last thread: http://www.techexams.net/forums/ccna-ccent/82276-successfully-passed-icnd1.html I was seeking to pass ICND2 before Christmas this year so I could finish 2012 with my goal of becoming a CCNA. I'm happy to report that I took the exam this morning (11/29) and passed with a 846 :D There was a…
-
Failed ICND2 Today(first try) - so close
Time expired on me at the last question. I ended up getting a score of 804 with 825 needed to pass.Oh well, if the test wasn't as difficult everyone would pass on their first try and the cert would be devalued. I know it sounds weird but, failing has given me a boost in my motivation to really study hard to kill the exam…
-
what does this ipv6 addr stand for?
This is the global local unicast range. This is the unique local unicast range. This is the link-local unicast range. But what do /3, /7, or /10 stand for?
-
Need reasurance with VLSM
I have the use of 172.20.0.0/22 and 172.20.4.0/22 I must subnet these addresses down and this is the table I have created. Can anybody reasure me that it is correct? Network Area No. Users / IPs VLSM block size / No. of IPs (powers of 2) HQ Network 112 172.20.4.0 255.255.255.128 RO1 Network 200 172.20.3.0 255.255.255.0 RO2…
-
Completey stuck :(. Need help and push in the right direction
Hello, I'll try to hold it short. I'm studying for the CCENT since 2-3 months. I've read following books: Cisco Press Official Exam Guide 1/2 through Todd Lammle I've watched following videos: Trainsignal ICND1 CBTNuggets ICND1 Now I'm at a point where I completely lost track of my goals. I'm totally confused on what…
-
Finally figured out rip!
I got my wic2ts in yesterday and popped them in but did not have time to experiment. I found time tonight after work as i have a bit of extra time to sleep tomorrow and well ive been working 60 hours the last three weeks (loving my checks). Anyways i figured out that i had to set the clocking, then i got it all setup in…
-
First Term Exams in Five days and lost...HELP!!!
Hey guys, this is my first post. Great forum btw :) . So here is my dilemma, So i've been taking the CCNA course from September and December 5th will be my Final Exams for the Network Fundamentals. I have to admit through I have not studied extensively as I should have due to being overly tired from work.......So I am…
-
Lab for the CCENT
Hey everyone, I recently just purchased a Todd Lammle book and have started studying for the INCD1 exam. My work has a Cisco 3550-24 PWR Inline Power Switch that they said I could take home and use. Will the 3550 be a good switch to use, and what else will I need to have a basic lab environment for testing? Thanks for your…
-
Router For Christmas???
Ok, So i passed my CCNA last month and im getting a bit worried that im going to start to forget things, I working in a tech support role but no real cisco exposure, Was thinking a good way of not loosing the knowledge is to buy a cisco router for the house! I was thinking of connecting the cisco up to BT VDSL modem and…
-
Thanks!
Been lurking for a while and just wanted to say thanks for all the advice so far! The forum has been a massive help and now I'm about to start the course I hope to be posting some annoying questions soon :D
-
2511 - Ctrl+Shift+6+x doesn't work.
So I telnet into the 2511. Telnet from there into another device. Try to Ctrl+Shift+6+x to get out of the telnet session with the other device. Doesn't work. I keep pounding on the X while the other three keys are held down - nothing. I've used: Command Prompt, TeraTerm, openSUSE's terminal, SecureCRT. I've tried different…
-
Epic Fail: ICND 2 smh...
Well, you'd think 75 minutes would be enough for less than 50 questions. Smh... I understood the information but Cisco is so sneaky with some questions I reread each to ensure I didn't misinterpret it. That'll teach me lol. Wth??? It wasn't that I didn't know what to do. The time limit started catching up with me and for a…
-
inside global and outside global?
Trying to make sense of this from the Todd Lammel book but thought I would ask here to see if someone here can give me another explanation on it. I just want to make sure I understand all my weak areas before my test.
-
Passed 930 on second attempt
I went back and studied hard on the things that gave me trouble the first go round, I was lucky to get some sims very similar to what I had on the first exam, so obviously I had had time to reflect on what I should had done differently, I was MUCH more prepaired subnetting wise this time as I spent lots more time…
-
Packet Tracer Vs. Boson
Based on some replies from members it sounds like I would need to go through each lab topic that is on the CCENT and match it up with an exam topic on Packet Tracer for the actual exam. That approach sounds O.K, but I could possibly miss something or Cisco does not focus entirely to much on a certain scenario leaving me…
-
Packet Tracer question.
I am currently watching an ICND 2 video on Rip V2 and I have a question. I am building the Video lab scenario in my packet tracer and my Serial interfaces are showing Serial0/1/0 and Serial0/1/1. I want to know if in Packet tracer I can make them like this. Serial0/0 Serial0/1 If anyone knows if this is possible please let…
-
MAC spoofing incident at work
Someone plugged a wireless router into one of our access switches at work yesterday. We use MAC white-listing through Server 2008 to allow clients to obtain an IP address and also use ip source guard on our access ports so users cant assign their own IP. Also have dhcp snooping configured on all access ports. They spoofed…
-
CCNA Lab Scenarios (Packet Tracer)
One of the members at Cisco Learning network has uploaded a collection of CCNA Labs (some with solutions) from different sources, Any one looking for practice labs I think they are a good resource. here's the link https://learningnetwork.cisco.com/thread/43066?start=0&tstart=0 Please note : I haven't provided the direct…
-
CCNA PASSED!!! Watch out that your sim doesn't freeze!
841!! Made it by 16 points!!! Half-way through one of my sims, a console window froze! I immediately went to the proctor (still loosing like 2 minutes) at my local site and they said, "ah yeah the Cisco exams freeze all the time." What the heck Cisco?!? The full extent of their troubleshooting was to hard boot the machine…
-
VTP Mode = Client accepts updates?!
If I understand this right: VTP Mode Client will not send VTP advertisements for changes locally, UNLESS it is first joined to a new domain AND has a higher revision number? So, to add further to the higher database revision problems, it breaks the rules when it first joins a new VTP domain?
-
for a bear bones lab with 2811
I was planning on using this for my cme lab, with a 3550 poe. Them after I got that down if I can't get the funds to buy another router. Can I just run no telephony-service and rebuild it as my CUCM gateway with vmware.
-
Question Regarding Router With Network Modules (Cisco 3845)
Hi. This is a very "newbie" question. If there is a forum better suited to this type of question, I'm sure someone will let me know. The Cisco 3845 router has four HWIC ports for the WAN interfaces and four ports for network modules. How are the network modules used? Would a network module populated with Ethernet ports…
-
lab suggestion ??
hi any lab suggestion for CCNA Security??? i have a laptop with 4GB RAM, yep, i'll upgrade it to 8GB (in this way, GNS3 will perform better)... and for a Physical Lab, is ASA 5505 will be sufficient or ASA 5510 is required? and, any other devices to buy ?? (i've no switches & routers at all)
-
VPN Question for Voice
Which is the correct way to configure my tunnel. Both ways work but which is proper. Data Vlan= 192.168.10.0/24 Voice Vlan=192.168.55.0 I was taught to create a loopback address such as 172.16.16.1/24 and send the tunnel to that address. Then I enable split tunneling to protected networks 192.168.10.0 and 192.168.55.0 with…
-
is this lab enough to pass ccna voice
Hello everyone i need help buying some equipment for my ccna voice exam i saw this on ebay and i want to buy it,the only thing i want to know are these equipment really enough to pass ccna voice and i don't need to buy anything else? 1x CISCO2620XM Router 128DRAM/48Flash with CallManager Express 4.1 latest 12.4 IOS…
-
ICND1, going to revisions the chapters ive studying but got a few Qs?
Afternoon, Finally ive completed the chapters in the Wendell Odom Cisco Guide. What i need to do is go through each chapter again because there's a lot of stuff i've forgotten :) Firstly, when im reading chapters in this book im confident that i understand what im reading but when i go to answer the Qs at the start of the…
-
CCNA Security 640-554 Official Cert Guide Kindle Version
Has anyone purchased the Kindle version of the book? The hardbook says it contains 2 cd's with practice tests and videos. I definitely prefer using my Ipad kindle viewer instead of books (hate the bulky, page turning, so screen is much better for me) but would like the cd material. So i'm curious if there's links to…
-
How do you know when you're ready to take it?
Hi all, I've been studying for 2 months now, for the CCENT. I feel very comfortable BUT every time I go back over the stuff I didn't touch for a while (theory) I always find material I already forgot about. So my question is how did you know when you're ready? I didn't invest in practice exams yet as most of them are just…
-
Is it possible to see multiple routing protocols on a router?
like "show ip protocols"? Will the lately configured always flush the previous ones?
-
Best Book for CCNA Voice
Can anyone recommend a book or two for CCNA Voice? I'm looking for the CCNA Lammle equivalent if there is such a book. Thanks!
-
802-640 Tomorrow: Question Timing/Pacing Tips?
The day is here. I take 802-640 tomorrow. I know the test is 90 minutes and 45-55 questions, but does anyone have any tips/advice on about how much time I should spend on each multiple choice / simlet? I would assume that the multiple choice are first, and not to spend to much time and run out during the sims? Thanks.
-
finding the icnd1 test in the ciscopress book hard
i thought i knew the material, have been revising for a while now, watched cbt nuggets, ine series when they were free to stream, and trainsignal videos along with his study guide, read the cisco press book and todd's one ive learnt all the material but am finding the exam which came with the book very tough did anyone…
-
CCNA Data Center
Caught me by surprise Looks like the exam covers Nexus. What do you guys think about it? CCNA Data Center - Career Certifications & Paths - Cisco Systems
-
ICND1 Passed
Passed ICND1 Today with a score of 912. The test was actually alot easier than I was expecting - I must have studied a lot of material which will be in the ICND2 exam, or I just got really lucky on the questions! Next step ICND2 :) Could anyone provide any tips for the ICDN2 exam? I notice that everyone goes on about…
-
CCNA Service Provider
I am heading down the Brocade Service Provider training (BCNP) but I should really do Cisco as well. I figured I would start taking CCNP tests but I saw that there is now a CCNA/NP service provider certifications. Has anyone here done, or is going to do, this track?
-
Dial Patterns
In my progression through CCNA Voice I'am now in pretty deep into CUCM and UC. I have phones setup that can ring each other and end users with voice mail and even managed custom wallpapers and ringtones. I just finished the setup of MGCP on my gateway router and it has registered the FXO port and Im ready for the next…
-
Network Academy - CCENT
Quick question on labbing for the CCENT (ICND1) using the labs provided from Cisco Network Academy. Not sure which sections are strictly for the CCENT. Study with CCNA Exploration.> Network Fundamentals> Routing Protocols & Concepts The two above sections are the only sections I need to lab from for the CCENT am I right?…
-
Practice Password Recovery, otherwise it will burn you in the field
Here is something that would be hilarious if it weren't so sad... I was recently on an engagement installing a pair of Catalyst 4500's, removing Allied Telesis POS's, and consolidating fiber plant. The 4500's were trunked to Cisco cataly 3560's, but the customer's RAIDUS was flaking out on us. I had to perform a password…
-
Something cool for your Lab
Everyone has been there when you set up a config in IOS and you botched it and want to just hit the reset button. But, you dont have a reset button until now! This will bring you back to your fresh base config before you messed up your VPN tunnel or worse. Until now. If you havent used Cisco Confiuration Professional then…
-
Having weird issues on my router
I was wondering about something about my router. Every time this router boots up it goes through a whole sequence and gives me a fresh start to configure this router. It doesn't save any changes i put into it. here I posted a txt file giving the boot sequence. System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)…
-
Outbound Calling
I just got both a 7960 and 7940 communicating between one another using CME. I have a registration to flowroute configured on a 1760. I originally had the 7960 phone working dialing outbound but not the 7940. I loaded new firmware and got both phones working between each other but I can no longer make outbound calls. When…
-
what is the passing score of CCENT? 75%
as title
-
Cisco
Hello guys, How can I configure a cisco 870 router to ask for username and password. This will be like a web interface login.
-
Issues with eigrp Topology table
hello, sorry for my english, but i'm italian. I find the guides cisco: The topology table identifies up to four primary loop-free routes for any one destination. These successor routes appear in the routing table. EIGRP load balances, or sends packets to a destination using more than one path. It load balances using…
-
STP - Spanning Tree Protocol in ICDN1?
Just to clarify; STP is not covered in ICDN1 (CCENT) correct? I've been over the Cisco outline for the ICDN1 exam and STP Is no bullet pointed anywhere. Just would really like to clarify that it's not covered. Want to be able to focus my studies on other areas :)
-
Why is AD of 5 for EIGRP Summary?
Why does EIGRP Summary route have preference, especially with the problem of auto-summary and discontinuous networks?
-
Routing Inter VLAN Problem!
Hello guys, I'm starting a point now, if we using a router to a vlan actually there is a purpose, they need hosts that's why router needs to them indeed but check it out like this, Router - Switch - 3 PC's Router Connect to switch Fa0/0 to Fa0/1 Switch port Between router and switch there is a trunk link, Right, There is a…
-
Pearson Vue PRactice Test Question
Going the Two test route for the CCNA. Did You find Pearson Vue PRactice exam helpfull when studying for the IND1 and IND2 Exam..
-
CUCM/UC Training
Since doing a full CUCM/UC install is outside the Scope of the CCNAV exam, were can I get some decent training on installation of CUCM/UC? My current level position requires me to just administor our CUCM/UC but not to set it up. Our current network architect is in charge of that and not willing to devulge his trade…
-
todd lammle 7th edition ICDN1 Chapters + NAT?
Hey all; I understand the chapters that need to be covered from the Todd lammle CCNA 7th edition book which cover the ICDN1 material (1-4,6,7,8,10,12,14,16) however under the Cisco blueprint for the exam it states that you need to know about and how to configure NAT which is chapter 13 in the book. Just wanted the advice…
-
Labs for ICND1?
I am using Packet Tracer for the ICND1. I went through the labs in the first and second course halves but they do not seem to be very indepth and I fear it will not be enough for the actual exam. Could someone direct me to the labs I should be working on to pass ICND1? Or any suggestions on the labs to work on from the…
-
which exam to use for icnd 1
ive got the boson exam from the cisco press book which im going through is this exam enough practice for the real exam? ive heard the questions are harder then the real exam
-
Passed ICND1!!!
I passed ICND1 with a score of 837!!! Now time to move on to 640-816!!!
-
GNS and tftp mystery
Hello, straight to my problem... First I did a simple rip triangle router's topology running rip and did the tftp-server command in one of them. I tried to save some configurations file to the router and I was getting all the time "Timeout"s. So I said I ll do it in a way that it was described in youtube. This was to…
-
Switches for CCNA/CCNP
Hi I've a fair bit of expreience in the IT industry but networking is my achilles heel. So I've just started some self-study for my CCNA (have chosen the ICND1/2 route). Have finished the CBT nuggets for part 1 and tbh, found it rather basic but that's not to say I didn't learned anything. but anway... My question is…
-
how many wireless channels for 802.11a,802.11b,802.11g and 802.11n
is this correct: 802.11a - 23 non-overlapping channels, max rate is 54mbps 802.11b - 3 non-overlapping channels, max rate 11 mbps 802.11g - 3 non-overlapping channels, max rate 54mbps 802.11n - varies, max rate 540mbps are there overlapping channels for each aswell? if so, how many? i come across a question on the web,…
-
Should I stay in my Data cabling job?
I been working in Data cabling job for 3 months. All we do is pull cable, pull some more cable and pull even more. Mostly cat6 but some fiber here and there. Mostly at the beginning of the projects. Currently my company gets the job for even Googles new 300 cable addition. I like the job, and love the idea if i one day i…
-
Q: Will switch forward unknown frame out different vlan ports?
Here is the scenario: 1. Frame enters a switch with destination mac which is not in its mac table. 2. Switch has three 802.1q trunk ports, and three access ports each in a different VLAN. To which ports will the frame go? Normally I would think it would go out all ports, but isn't the purpose of a VLAN to contain those…
-
Why ARP request failed when the router is configured to be another subnet?
router f0/0 192.168.1.1 255.255.255.0 host 192.168.11.10 255.255.255.0 I understood this is incorrect, but thought ARP should work. I ran a test in PT. When ping from the host, ARP packet is addressed to FFFFFFFFFFF, requesting the MAC for target IP 192.168.1.1. The ARP request reached the router. The router did not…
-
NEWBIE MCITP/CCNA Networking
Hello All, I'm only a new member here as I just bumped on this site. Well to start I have a passion for networking. I love it, I wish it's something I could do for every min of life jk :D I need help on what certs and classes should I take. I went to an institution close to me and I was asked to sign up for MCITP and on to…
-
Help a beginner...
Hi guys, Just a few questions.... I'm looking to start a new career and get into Networking and doing some Cisco courses. With no prior experience should I do Ccent before ccna? Also with no prior jobs in I.t would I be able to get an entry level job with these qualifications? I'm late 20's in the uk. Also, are the courses…
-
Need help making sure I understand some IP Routing stuff
I'm reading Todd Lammle's book on CCENT and studying IP Routing since I found this to be a weak area for me. Chapter 6 on page 385 his talking about stub network is networking with only one exit path out of the network and then makes a reference to page 355 saying Router 1, 2, and the 871w are stub networks. But on Router…
-
is this the correct action a router takes when forwarding an ip packet
having difficulties with understanding the below as i dont think its correct- is the below the correct action a router takes when forwarding an ip packet received on a lan interface: 1) checks the incoming frame's fcs 2) discards the data link header/trailer 3) matches the destination ip address in the header to the ip…
-
Cabling is killing me.
As I told you days ago I just started with this new job my first IT-Networking job. So I have a new task I must arrange the racks cables for an office. The rack its a small one, we have 1 Router ,1 Switch ,2 ASA , 1 DVR , and 10 end devices (PC , Telephones). Now I Need to disconnect everything to fix the cables because…
-
ICDN1 Simlet,Pratice Exam questions?
Hello, A question for you that have sat the ICDN1 exam recently. I understand that there are a form of practical/simlet questions on the exam? Could you please provide a bried insight to the structure of these questions? A question which I also have is are you allowed to make use of the "?" command to make sure you are…
-
CCNA:Wireless Labs?
Anyone know if Cisco Press created a Wireless Lab Manual? I'm trying to get a tally of what I need to lab the Wireless
-
Seeing the same SSID twice
Hi guys, I'm completely new to wireless deployments but am currently stepping sideways to deploy a small wifi network with a Cisco 2500 WLAN Controller and 4x 1041 APs. Currently I have two APs up and running through the controller and I'm seeing the same SSID twice when using some wireless software on laptops e.g. DW…
-
Just a little overwhelmed again about Sybex book and Simulation Questions for CCENT
Just pulling my brains out again and pacing back and forth. I have the Sybex book 7th edition, CBT nuggets and Packet Tracer. I just want to make sure I have enough to prepare me for the simulation questions. I mean I know the labs in the book and Packet Tracer are good but the test with the book dont have simulation…
-
VoIP Scenario
Hello Guys! At first, I would like to thank all of you, I always follow this forum and helped me a lot to get my CCENT. Although not topic for CCNA, I have a big problem with L3 switch and DHCP Server on a router. I can't understand completely the concept of "trunk native" and "access mode". I have the scenario in…
-
Summarizing Routes
When summarizing routes, do you just advertise this one route out of the router? Do you have to stop advertising the individual routes?
-
Whats the big deal with subnetting?
Has anyone asked themselves whats the big deal with subnetting? Seriously, if it just takes 5 minutes to whip out a nat translation in a cisco router to a class A, why bother? Or is there something bigger over my head that im not seeing
-
Commands???
Hello, I just have a couple questions. I have been doing complete independent study on the CCNA. I will take my test next Monday. I feel pretty confident with everything except the commands. I have taken several practice exams and that is the only question that I miss. Do you think that I will fail the CCNA because of the…
-
Registered to take CCNA today.
Well I went ahead and registered for my CCNA today. I am scheduled to take it the first of next month. I have been through all of the Skillport courses the army has to offer. I have also re-studied all of my training material from all my military courses from last year. Now I am working my way through the Sybex book. I…
-
Port Security
Hello guys well then i'm studying port security to switch actually, But i learn these few commands but i'm asking in this thread there is any advance commands is used for advance port security int fa0/0 switchport mode access switchport port-sec switchport port-sec max 1 switchport port-sec violation restrict switchport…
-
Redistributing EIGRP into OSPF Multiple Areas
Hi Guys! Although it is not topic for CCNA (it is CCNP topic, but in my opinion it's very simple), I can't configure redistribution of routes correctly.I need to redistribute EIGRP into OSPF multiple areas, like in the attachment. The DR router from backbone area (DR_A0) is configured with EIGRP redistribution and it works…
-
Question about CME/CUCM and Cisco "Spare" phones
Hello there, I'm starting myself in the voice track (CCNA VOICE) and i've been buying some equipment for my lab. As for now i got a 2801 ISR with a pvdm2-8 and a vic2-2fxo card, and i also got a brand new cisco 7942 quite cheap (40 bucks) but when i did buy the phone i wasn't aware of the "coding" and "licensing" of these.…
-
Quick Questoin Very Easy..Need clarification. thanks
If you are given a diagram with 1 Router connected to a switch and 50 host all connected to the swicth. HOw many IP address is this in total are needed? *50 host Plus Interface IP I count 51 IP Addresses in Total IS this correct?
-
Pursuing CCNA/CCNP for work & school. Seeking help.
Hello, First off I would like to take the time to say this community is excellent. I have been provided with a wealth of knowledge thanks to the members of this website. So here is my situation..I have six more classes remaining(pertaining to the CCNA/CCNP) until I complete my bachelor degree. I've decided to test out of…
-
No IOS experience. How long might study take?
I have absolutely no Cisco IOS experience. I have my net+ however. Would it be completely unrealistic to try to pass the CCENT after 6 weeks of studying? I'm trying to plan out my 2013 cert goals.
-
Passed CCENT Today!!
Scored a 937. Here's what I used to study -Odoms ICND1 Book (read it twice) -CBT Nugget Videos -Train Signal Videos -Packet Tracer and my home lab Test was easier that I expected. Thought I would be more excited about passing it
-
VLSM (Variable Length Subnet Masking), Summarization.. Not In ICDN1 Material?
Hello all; I am currently studying towards the ICDN1 exam. I am using Tod Lammels CCNA book to study for the exam, I understand that Chapter 5 "VLSM (Variable Length Subnet Masking), Summarization.." Is not in the ICDN1 material, could you all confirm? Just to confirm that the Chapters from this book which covers the ICDN1…