-
Lab manual
Does anyone know what book this guy is using at 0:10? Is there one for ICND1/2? https://www.youtube.com/watch?v=Z6BoX7tpCFw
-
2821 and 2811 15.1 IOS
How long should I expect these routers to last before I'll have to update them?
-
Can someone explain what the new CCT is? Should that be newbie starting point?
Also does the CCT cert expire after 3 years?
-
Collaboration
Hey, What equipment do we need for the collab cert? ****NO GNS3 or Packet Tracer**** Thanks
-
CCNA- should I take it one part at a time or both same time?
I see theres an ICND1 and ICND2 tests to make the CCNA. I am debating whether or not to take both at same time or do ICND1 first and then 2 or vice versa. Any suggestions?
-
How good is VIRL?
Hey guys, I am enrolled in the Cisco Networking Academy through my college, They have given us packet tracer to use, but i would really prefer some actual kit. I have physical gear but i am looking at virtual at the moment as i am on the move a bit. I looked at GNS3 and it looks a lot more complicated that it once was, and…
-
Tablet to interface with equipment and use packet tracer
Need a tablet that can connect to a keyboard or somekind of ultrabook. Needs to be compatible with packet tracer, and be able to use an interface to connect to a switch or router. Any recommendations?
-
Which Udemy course - Laz's or Chris's
To help pass the 200-120, which would you recommend? https://www.udemy.com/the-complete-ccna-200-120-course/ Or https://www.udemy.com/ccna-on-demand-video-boot-camp/ I only have time one of the courses, or I'd do both. Just a little background, I've been working in IT for years (mostly Desktop/Sever support) but I'm…
-
Enquiry about Renewing Cisco Associate Grade Certification
I have a CCNA Security, which will be expired in April. I am interested in taking CCNA Data Center Certification, but I am afraid that I don't have enough time to complete both 640-911 & 640-916 examinations. 1. May I renew my CCNA Security by completing either one of the above examination? 2. If yes, does the order of…
-
Ccda 200-310
Hi all thinking about studying for this is CBT Nuggets CCDA Module any good ? its seems to be only 5hrs is this enough to get you over the line ? need to do a CCNA exam to stop my CCENT from expiring
-
Looking for some advice...
Back in December I passed ICND2. I thought a next step might be CCNA:Sec. I've been reading the OCG book and watching Chris Bryant's Udemy videos for a few weeks now and I just can't get into it, it doesn't interest me like routing and switching. That being said, have any of you felt this way about the CCNA:Sec? I'm…
-
Which one is "harder" ICND1 or ICND2
Just some insight, I took the old ICND1 exam like 2 years ago and forgot a lot of it. Ive read through ICND1 (new) chapters and found some new cool stuff but it looks like the (new)ICND1 covers a lot more info than before. I want to finish up ICND2 in the next month or so but just wanted to get some opinions from people…
-
Passed the ICND1 today, but I'm disappointed.
I just took my first Cisco exam and I'm truly disappointed. I have no experience in IT, this was my first exam. I felt like I had a really good level of knowledge going into this and was honest ready to crush OSPF, IPV6, NAT, etc. Configurations and all. Lets just say pretty much every MAJOR area I studied and expected to…
-
Anyone have an opinion on this study material for the 210-260 exam?
Anyone have an opinion on this study material for the 210-260 exam? http://www.amazon.co.uk/CCNA-Security-Lab-Manual-Companion/dp/1587133504 Considering it, but just want to see if others have used it and what their experiences have been. I'm hoping to use it alongside GNS3, but I just don't know if thats possible .....
-
Help with simple static Nat setup-chart commands included
Basically have this lab,and got nowhere in hours time,and its driving me crazy,point is to set up NAT that two pcs could ping and access server directly,i input the commands as in picture and get score of 50,thus no static nat set up,but interfaces are configured fine ? also can ping router and if enter routers ip…
-
Good OSI model flash cards?
Can someone please point me to a good source for flash cards to help with the OSI model? I have searched the web but the results are inconsistent, and I don't really trust the sources. Figured you guys would know best. :)
-
Skipping Net+ straight to ICND1?
Hey Guys, I see a lot of people suggest studying for Net+ like you're going to be taking the exam but actually skipping it and then studying for ICND1. Does this make the most sense or is it a money issue?
-
L3 Switch 3560 IPv6 Autoconfig
Trying to assign a Host an IPv6 IP address. Not working, could anyone try it on real switches and see if it works. L3 Switch: ipv6 unicast-routing interface Vlan1 no ip address ipv6 address 2000::1/64 ipv6 enable shutdown
-
Home lab recommendation
Hey guys, I'm currently looking to purchase a home lab to study for my CCNA. I was wondering if this would be a good lab to start with from cert kits. If any of you have any other recommendations I would love to here them. Basic 2 Router & 2 Switch CCNA Lab Kit 200-120 - CertificationKits Thanks. *edit Will I also have to…
-
Ping works but not http , static nat configuration.
Have a simple static nat configuration in packet tracer. I can open the http page from a pc on another subnet using the nated public ip but cannot do this with the private ip.Ping works with both IP's private and public. This is on a simulator should it not work.OSPF Is enabled.
-
Passed 200-101 ICND2/CCNA.
Passed 200-101 today on my first try! CCNA-Security and CCNP R&S coming up! I felt ICND2 was way EASIER than ICND1 for some reason...
-
Extended Ping
Do I need to know all the options for ccent ? Router#ping Protocol [ip]: Target IP address: 192.168.1.1 Repeat count [5]: Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: y Source address or interface: 192.168.10.1 Type of service [0]: Set DF bit in IP header? [no]: Validate reply data? [no]: Data…
-
Passed 100-101... but Comptia Network+ was harder!!
I just passed the firt CCNA exam with a 951 score! I thought it was a more difficult exam: no OSPF, no IPv6, no ACL questions and only 2 labs/sim tests! Maybe I was lucky . Anyway, the Comptia Network+ was much more difficult for me since I found harder questions and many lab tests!
-
OSPFv3 on L3 Switch
3 L3 Switch's 3560 connected in a row. Trying to configure OSPFv3. Not working , what am I doing wrong ? SWITCH0 ipv6 unicast-routing interface Vlan1 no ip address ipv6 address 2000::1/64 ipv6 enable ipv6 ospf 10 area 0 ! ipv6 router ospf 10 router-id 1.1.1.1 log-adjacency-changes SWITCH1 ipv6 unicast-routing interface…
-
CCNA Security lab
If I was to build a small lab what model switches, routers and ASAs would you recommend? Ideally I would want to keep the cost down. Thanks
-
Starting into CCNA Studying
Hi all, I am going to start studying for the CCNA since I have passed my Net+ a while back. I did have a few questions though maybe someone can answer. How up to date are these stickys for the current exams? Also where would be the best place to buy a physical lab or can someone tell me what models of routers and switches…
-
What it takes to pass CCDA with flying colors (in my experience)
Disclaimer: Please note that the OCG may barely cover enough content to get a pass. Using these additional resources should cover the gaps in your preparation. Also, I'm not a designer. Still, I would advise all network engineers to look at the design stuff (excluding the marketing information). What it takes to pass CCDA…
-
Unfamiliar questions regarding subnetting.
Good evening guys. I was recently given a quiz by my ccna instructor regarding subnetting. I am new to subnetting, as I am with networking, however I haven't seen these types of questions before. Using the address 130.100.0.0 a) create a subnet mask for 1000 subnets, with maximum amount of hosts. b) Work out the 600th…
-
CCNA Security Material
Looking to start my CCNA Security after a bit of break from completing my DC studies. Wondered if someone could shed some light on the best materials to use for the exam? Obviously, the OCG is normally the first port of call but apart from that are there any other good books for the exam and also beyond the exam as I may…
-
Getting packet tracer labs
I am studying Todd Lammle's CCNA Routing and switching study guide and was wondering where I can download the packet tracer labs or get help working on these labs. I have packet tracer and have done some of the youtube tutorials that I do find helpful, but I can't find a series of tutorials on youtube. It seems best at…
-
Cisco Lab Help(what router should i get)
Ok I'm in the process of setting up a lab for icnd1 and icnd2, I have 2 switches so far. I also I have one router that I got from my friend but when I try to connect to it via console port it doesn't display anything in putty. I'm not sure if there is a way to fix this and if so it would save me a bit of money. At the…
-
Download ASDM from ASAv
I created a VM which is running ASAv hoping to practice with ASDM. I configured G0/0 with an IP of 192.168.137.100 and Management0/0 with 192.168.138.100. My laptop has virtual NICs of 192.168.137.1 and 192.168.138.1. I am able to ping from my laptop to both of the ASAv NICs successfully and also from the ASAv to my…
-
Need some help / Packet Tracer
Doing a bit of internet searching, and looking for someone who may could assist me in refreshing my CCNA skills. Upon the first class, and assignment, we were asked to set up this network. Lone behold, I realized I have not retained the previous information very well. I know this may look simple to some folk, but just…
-
Best lab manual for at home lab
What is the best lab manual for icnd1 and icnd2 for an at home lab.
-
Prerequisite
Hello everyone, I am new to this forum. Just got a question..I dont know if this is already discussed here. I am currently doing the Comptia Security +, was wondering if this certification can act as a prerequisite of CCNA security. I heard that Cisco wont release my certificate until I pass the CCENT. Suggestions?
-
help setting up an asa5510
I'm looking to upgrade the asa and asdm software on an asa5510. I've found plenty of references on how to do the upgrade, tftp the files, put the file locations in the configuration and save it. But, I cant find anywhere how to setup an network port with an ip address. Never worked on an asa before so I don't know and…
-
Need Advice!! Cert Renewal time
Not sure if I want to go for the CCNA-S or just do the INCD2 to renew my cert. Im extremely confident in passing the INCD2 since most concepts are familiar to me.. I feel if I study for the CCNA-S and pass it, I will completely forgot everything quickly since I am not working in the field. At this point I am leading…
-
Syslog for ccent ?
Do I need to know the commands for syslog configuration for the ccent ? I did not see syslog mentioned in the blueprint,though saw the commands below in the lammle book. Router(config)#logging host 193.10.40.1 Router(config)#service timestamps log datetime msec
-
Anyone familiar with Solarwinds Kiwi Syslog Server?
I've downloaded the free 5-device version so I can get my head around Syslog and have installed it at work, initially with just default settings. I've configured it to listen to 5 IP addresses. I tweaked the existing firewall rules on my PC (syslog server) to include Domain, Private and Public (only allowed Domain by…
-
CCNA Lab Guide
I have equipment I am setting up to study for the ICDN2 portion of the CCNA. Are there any reputable and good lab guides for free or pay? Ones I have found are for the old CCNA tests and for the security test. Thanks!
-
[help] CCNA Mod 2 Inter vlan routing
My instructor gave us this diagram to do (Not homework just practice) and I'm having a hard time figuring out how to configure it since there's 3 routers, and multiple switches interconnected. Could someone help walk me through configuring this? Thanks
-
Getting laid off next friday...Time to study for CCNA
I am a network engineer for one the big 4 carriers and we are having massive layoffs. Getting laid off next friday. Time to renew my CCNA. Lets get it guys!!!
-
Re-Certifying CCNA R&S - ICND2 exam - Book and difficulty for you
Hello I was originally going to go for a new cert either CCNP - Switch or CCNA Wireless or Security. But I have made the decision to just go for the ICND2 exam and get it out of the way. As my CCNA will expire in September and I am a busy person and do not have much time to study I am just wondering guys that have…
-
New to voip, need some help
Hello guys, I've been designated to implement a CME solution for a new branch office, and I am currently having some issues integrating this new router with the existing router on the main office. Currently, they have several other sites (using FXS interfaces for the phones and H323 connection to the main router) and this…
-
CCNA / CCNP R&S Revision Group
Hi all, Me and some other students have been running a revision group on Google Hangouts for the last year or so and it's been going pretty well. I am looking to expand this group and get our numbers back up again. If you're studying towards either CCNP: R&S or CCNA: R&S you are most welcome to join. I will be looking to…
-
how important is ipv6 for ccna
Anyway its been about 4 months now in my studies towards ccna.Most chapters are long and very dry using netacad mostly,thus getting to do around 2 chapters per week which i barely manage.But so far have avoided any ipv6 subjects,its just bunch of numbers crammed in and mask on top,now i know couple basic commands ipv6…
-
Question about a CCNA home lab
Hey guys, I'm very new to networking (Currently working desktop support for 2 years and looking to move up) and would like your input about a home lab. Do you guys think a home lab is worth it? I was looking on cert kits and found Basic 2 Router & 1 Switch CCNA 200-120 Lab Kit - CertificationKits . Would this be any good…
-
Ospf uses protocol 89
What is protocol 89? Does it have anything to do with ip?
-
Switching queries
Configuring DHCP on a Switch 2960 and 3560 in Packet Tracer would not work untill I gave the native vlan an IP , why is this ? Changing the native vlan using command: switchport native vlan vlan_id (above command is not in packet tracer, switchport command is not part of PT)
-
Few Basic questions VLAN and OSPF
1.Can a VLAN Interface have a secondary IP assigned to it ? 2.How many DR/BDR in a Network ? I see multiple DR's even when one of the DR int IP is lesser than the other.
-
On to ICND2?
I recently passed the ICND1. My original goal, before starting my CCENT journey, was to stop after the getting the CCENT. However, I am having second thoughts. I feel that after all that I learned I should at least take a swing at the ICND2. For those who have their CCNA R&S, how long after passing the ICND1 did it take…
-
Cisco CCDA 640-864 has this one expired ?
Hey guys I am trying to find study material for this but I keep finding two exam numbers [h=1]Cisco CCDA 640-864 and 200-310[/h] Is the new one 200-310? Also for anyone that passed the exam what study material do you need? I have GNS3 and Packet Tracer, and a real 2960 switch What theory stuff / videos do you need also?
-
Dynamic NAT problem
Hi everyone, I just have a question: why doesn't dynamic NAT in my PT-lab operate at all? The design includes 2 routers connected to each other via subnet of 211.90.33.0 /25 (router interface IPs: 211.90.33.41 and 42, interfaces Fa1/0 on Router1 and Fa0/0 on Router2). 2-2 hosts are connected to each router, which hosts…
-
Need Suggestions for Career path starting CCNA
Hi , I have an inclination towards network security , so what should my initial path be......??? I need to specifically mention that I have to enter network security domain CCNA R&S(CCNAX)>>>>CCNA Security or CCENT>>>>>CCNA Security I am confused.... Also whats the min waiting time after completion of 1 cert before…
-
Ready to take Exam
Hello All, It has been a while since I have been on here at TechExams Forum, I stopped studying for a minute. But for the last Six weeks I have been studying more daily and getting close to where ready to take the ICND1 and again. I this time I hope to pass the exam. with that being said. My question is the a book in which…
-
A basic routing question
Hello everyone, I'd like to inquire, what can be the root cause of the following configuration in my PT-lab: 2 routers (R0 and R1) connecting to each other via subnet 172.31.0.0 /16 (R0: 172.31.0.1 /16, R1: 172.31.0.2 /16) R0: 172.30.0.1 /16 on the LAN interface towards 1 host with IP 172.30.0.2 /16, gateway set to…
-
CCNA Recertification stinks
Serie 650-xxx no valid for CCNA or CCNP
-
Another home lab question.
Hi, everyone... First of all i want to thank you all for your contributions, this forum is a great source of info for noobs like me. Btw, im starting in my Cisco journey and i want to familiarize myself on a real equipment. Im investing on a small lab for CCENT/CCNA prep. I need some help about the getting the right…
-
Failed My CCENT Exam - 784
So after a long awaited test, I felt I was finally ready to take the exam. I'm part of the Cisco Networking Academy and figured since it's winter break, I should go ahead and take the CCENT (as the CCNA part starts on the 19th). I went in feeling confident, and answered each question to the best of my knowledge. In fact,…
-
Shortest ccent book ever
Guys, I'd like to recommend this book to people studying for CCENT. It is very short and is really good if you don't want to go through 700-800 pages just to review. Here it is on Amazon: http://www.amazon.com/gp/product/B01AS6TB64 Good luck with your exam!
-
I have passed ICND1 :))) >>>>>>> Going to ICND2
Thanks for every one gave me advice or helped me during this test . I did pass it finally , and I would like to know from you guys which BOOK YOU PREFER FOR ICND2 . I USED LAMMLE FOR ICND1 AND I AM THINKING TO USE Wendell Odom BOOK THIS TIME . WHAT THE DIFFERENCES IN ICND2 , WHICH IS BETTER ?
-
CCNA-Security expiration not renewing?
I just passed the CCDA in order to reset my expiration for my CCNA and CCNA-Security. According to Cisco only my CCNA expiration extended out. Does anyone know if I am missing some reason why the CCNA-Security wasn't extended? I figured I should ask here before going down the Cisco rabbit hole of requesting assistance.
-
A week to Test Day (ICND1)
I'm a week out from taking ICND1, and I'm hoping some of y'all would be willing to comment/critique my methods? They worked (I Hope!) for me, but I want to know what you all think. I'm linking to my blogpost instead of dragging it all over. steveinit.wordpress.com/2016/01/11/one-week-to-test-day-ccent/
-
I failed ICND1 couple days ago :(
Could you please guys suggest or recommend some practice exam trusted resources , since I did't practice a lot of questions and I get confused during the test. I did practice only with Boson Exam , but I didn't find it enough to take the test. All I want guys that you give some websites , books or software names for…
-
Sharing a Home Lab
Hi everyone, Some classmates and I are building a basic CCNA rack lab, and we are thinking in sharing with others students (like a rental rack but cheaper and only with few users). The first step is access to a router 2610 with nm-16a and then reverse telnet to the other devices, to prevent (un)intentional changes the…
-
CCNA ICND2 Passed!
Hey everyone! Passed 200-101 today. Got an 854, not too happy with the score but a pass is a pass. I was really disappointed with this exam compared to the ICND1. I thought the ICND1 questions were written a whole lot clearer, and that may be by design but gosh, some of the questions were pretty off the wall as far as…
-
ICND2 passed!
Hi everybody, I passed the ICND 2! A couple of things I want to say....First, the way this test was worded made it twice as Hard as the ICND1. I'm usually able to get a sense of what the question is ask after 1 pass at reading the question. I read questions maybe 3 or 4 times before I was able to understand what they…
-
ICND1 exam froze on simulation question!
Meet the guy who had their Cisco certification exam freeze and had answers erased/reset. Vegas anyone?
-
Lab gear requirement for 200-355
Well, I'm not going to make the deadline for 722. I have a 4402 and some 3600 APs. Will this be enough for the 355? /C
-
wildcard mask range number question in chapter exam ?
was doing chapter exam and got this question What single access list statement matches all of the following networks? 192.168.16.0 192.168.17.0 192.168.18.0 192.168.19.0 with following answers possible: access-list 10 permit 192.168.0.0 0.0.15.255 access-list 10 permit 192.168.0.0 0.0.0.255 access-list 10 permit…
-
IPS Signatures for Cisco IOS
Hi all, New user to the forums! Being a student and as part of a study surrounding vulnerabilities and exploits, I am currently doing experiments using intrusion prevention mechanisms in IOS as and the effectiveness of these systems and also the potential performance impact that using IPS has on traffic passing through a…
-
ICND1 and ICND2 passed, Anki Flashcard Decks and lab **** inside
Edit1: hehe, techexams blanked out the word p_rn in the title, whoops Edit2: I just noticed the MLP poster in the background. Coworkers... Time spent on ICND1: 65 hours (I passed this already 3 years ago, but had to renew. Took 65 hours of review T_T) Time spent on ICND2: 75 hours (I studied for about 1/3 of this 3 years…
-
Secondary IP address command not in Packet Tracer.
Has anyone used the secondary IP address command in PT ? Can I create separate subnets using this command ? Like : Router interface has 192.168.1.1 and secondary is 192.168.2.1. Switch has some Hosts with 192.168.1.0/24 and some Hosts with 192.168.2.0/24
-
STP Confusion
So I've always had a tough time grasping exactly how STP decides which ports to make root/designated/block. I was recently challenged by someone to come up with a solution to why a specific link is blocked in a topology. It forced me to do the research required to gain an understanding of how it works. Im going to list the…
-
Remapping VLANs for a migration from one VLAN scheme to another
Figured I'd share this- I've got some sites that I'm migrating from one VLAN scheme to another without changing the User IP scheme during an equipment swap. Unfortunately many of my IDFs are not hanging directly off of the MDF, and with 20+ IDFs to swap, I was looking for a solution that would allow for the least amount of…
-
CCNA Security - Packet Tracer Enough?
Hey guys, Been 4-5 years since i really looked at Cisco. A buddy is prepping for an entry level security job he's interviewing for next week. So we're gonna bootcamp the CCNA Security material. I figure good review for me and all. So the question is, I see Packtet Tracer has a ASA now days. Is that enough to do say 80% of…
-
Ccent scheduled
March 12. I've been studying for a bit now but two more months should get me there. I am nervous as **** now that I scheduled it and it's two months away. Do you guys have any tips that you "can" share that would be of use? Thanks
-
Is this part of ccent ?
Is this part of ccent ?errdisable is in the syllabus of ccent. From the Book- How to Master CCNA. Switch(config)#errdisable recovery cause psecure-violation Switch(config)#interface fa0/1 Switch(config-if)#switchport port-security aging time 10 You can change the aging time from 0 to whatever value you like with the…
-
Quick Question about CLI in CCNA Exam
Got a buddy who is taking the exam, I took mine years ago. He asked me if you are able to use partial commands in the exam or do you need to type out the full command. I don't remember, so any help would be appreciated. Also are you able to use command help? Thanks, -Phil
-
Collaboration study materials?
So far I found the Cisco press book on Amazon. Has anyone else found other resources? Videos? Books?
-
New here - Just introducing myself
Hi all, I'm currently studying for the ICND1 exam in a classroom setting, I might be doing the ICND2 exam by myself though and after running across a brilliant Subnetting Made Easy thread made on these forums that helped me a lot I've decided to stick my head in the door here. I've been studying for the first exam for five…
-
Upgrading IOS....Any Alternative?
Hey all, So I have decided to upgrade the IOS on my gear from 12.2 to 15.0(M). Looked at Ciscos's website and they only have version 12 for my switches (no contract), but with a slightly different version. As for my routers, my instructor accidentally put the image on the CF for a 2801, not the 2811 one. So were going to…
-
CCNA Industrial Certification - Exam 200-601. Does anyone know if a book exist?
I am looking into the CCNA Industrial Certification for managing industrial network for manufacturing, in specific exam# 200-601. I couldn't find any books on Amazon or from Cisco press for this topic. The only thing available is a course offered by Cisco it self and it's a $350 online course+lab. Does anyone have any…
-
Passed Icnd2
This morning I passed the Cisco 200-101 exam to earn my CCNA. It was a tough test and I certainly would not be able to do most of the exam topics in the real world without lots of help from people with the experience. At least I can update my resume and am that much closer to graduating from WGU.
-
Just scheduled CCENT
Finished the first section of the Lammle book. Figured I should schedule my exam before I backed out again. Set for December 15. Gives me about 2 weeks to study. Mostly worried about ACLs, port security, and IPv6. Feel pretty good about subnetting, thanks to the forum. Not sure if I should spend more time on running…
-
Why doesn't my pc1 computer no get a 2001 address?
Why doesn't my pc1 computer no get a 2001 address? https://www.dropbox.com/s/r94mvkze5x03my3/ipv6%20static%20route.pkt?dl=0 I am trying to follow a lab via school, if someone can take a look at my config that would be so helpful!!
-
Want more SNMP and NetFlow!?
Anyone else go through the Lammle book and after reading about SNMP and NetFlow, did you want to setup an NMS? I sort of tried with MRTG and then tried to add Cacti but had some database error. Still bothering me though thought about trying the free version of PRTG on my Windows side. What are you guys' thoughts?
-
Help: After Factory resetting my router and switch I cannot type shortcuts
Hello all, so my problem is that i can type in the console Switch(config)exit, and it takes me to privledge mode, however i cannot type the shortcut word "ex" i was able to do that before i factory reset both router and switch. I cant type any shortcuts which is weird.
-
Wireless Cisco wan router.
I'm looking to change my router, I want to have more advanced cisco router at home that i can play with. any suggestions on model ? what would you buy?
-
help figuring out CIDR notation
I have a network address of 136.15.224.0. I have a max number of hosts of 100 i would need a host bits of 7 the largest subnet is 100, so it would require 7 host_id bits number of subnets is 10 number of subnet_id bits needed is 4 the supernet is /21 the subnet mask works out to be /25. which would i use for the CIDR? I am…
-
Why does my IP keep overlapping?
I'm trying to do a lab in PT. and get the following error: FIRST Router(config)#int G0/0 Router(config-if)#ip add 192.168.0.1/30 Router(config-if)#exit SECOND Router(config)#int G0/0 Router(config-if)#ip add 192.168.0.2/30 NOW, ON THE SECOND ROUTER I TRIED CONNECTING A SWITCH connected with 5 PCs SECOND Router(config)#int…
-
CNSS 4011 recognition certification?
Hi, today i passed the 210-260 and was surprised to receive two emails from Cisco. One stating that i passed the 210-260 and one stating that i completed the [FONT=arial, sans-serif]4011 Recognition certification requirements.[/FONT] [FONT=arial, sans-serif]Does anyone know what this is? Will i receive an actual…
-
OSI Model, broken down Mafia style
I thought this was pretty cool...lol. The OSI Model as explained by Laura A
-
Help: Configuring Router
Hello guys, ran into some trouble today, basically i am trying to get connectivity from my router. I created an ip address which was 192.168.1.20. subnet mask 255.255.255.0. All my lights on the router are on and green. My ethernet cable is connected from my pc to my switch and the lights are on as well. I go on cmd and i…
-
Recommended ASA for the new CCNA: Security (210-260 IINS)?
(Let me preface this with saying I'm interested in physical equipment. I'm not really interested in running GNS3 at this time. I have a fairly robust hardware lab already) I would like something for CCNA:Sec to last through CCNP:Security. After reading the Exam Objectives and looking at the ASA Compatibility Site, am I…
-
CCDA/CCDP roundtable discussion
https://www.youtube.com/watch?v=h79NMDg8tVA&list=PLsVrXzrMYPevBZByGTz3TMQpxUuhLGKEG I found it pretty interesting. Not much tech meat, but more philiosophical.
-
Lateral Vs. Ascend
Hello, my fellow Cisco Champs! I come with good news and a question. My good news is that I aced the CCNA: R&S handily with a score of 907/1000! I used CBTNuggets and Udemy.com's Chris Bryant Bulldog Bootcamp. I also utilized GNS3 and Packet Tracer for labs as well as a remotely connected equipment with CramMaster Online.…
-
Remove ASDM from ASA
Hi Im trying to remove ASDM from ASA, ive done a "config factory-default" but ASDM is still there. I also delete the bin file from flash drive and im still able to use ASDM. Is it posible to remove it?how? thanks
-
CCNA: Security practice exams
Can anyone recommend any good practice exams? Thanks.
-
Unable to return to Terminal Console
Hey all, So tonight when I finshed setting up my lab in Putty, I attempted to return to my 2509s menu using the CTRL+SHIFT+6+X combo, but it didn't work. tried it in Tera Term, no go. Amy ideas on what else I should try?