-
ICND2 - Passed!
Pretty exciting news, I passed ICND2 yesterday morning! Not the greatest score but doesn't mean I'm going to settle. Obviously going to continue studying and learning and mastering the topics at hand. 841 points. Now CCNA R&S Certified.
-
Probably going to start with subnetting first
I'm thinking of starting with subnetting first for the CCENT. I want to get that down and get it out of the way because its going to be all over the place on the test probably. When I took it years ago I used the Todd Lammle method which was awesome. I did not pass back then but im giving it another go. Then I will go…
-
CCP Soft in the DVD
Hello I have a question I did order the book of Keith Barker ,,,and wondering is the CCp soft in the DVD ? and if not ,,does anyone have the link to download it ? Thanks
-
Did a lab, got 100% on it, don't understand output
Ok I am doing subnetting labs right now and the basic Gist of it is this. I am given a table in which I have 2 IP addresses that need to be entered into a router. One on s0/0/0 and the other on fa0/0. Here is the table: Serial0/0/0 - Address 172.16.133.233 - Mask 255.255.255.128 FastEthernet0/0 - Address 172.16.133.1 -…
-
New exam: CCNA Security 210-260
Browsing through Barnes and Noble Today and found this OCG in Barnes and Noble. Funny enough I couldn't find it on Amazon, and it's not announced on Cisco's website yet. That's definitely a first.
-
Does Home Lab KIT worth for $299
I'm looking for buy home lab kit and found these. I just need your opinion if it's worth for $299 Thank you in advance Routers: 1x CISCO 1841 Router [256MB Dram/64MB Flash] Latest IOS: 15.1 Release Date 25-May-2014 2x Fast Ethernet Interfaces 2x WIC-1DSU-T1-V2 (2 x T1 Serial Interfaces ) 1x CISCO 1841 Router [256MB…
-
Good Excel subnetting chart?
Hi, Does anyone have a good Excel subnetting chart they are willing to share. Something similar to this but printer more friendlier.. http://blogs.interfacett.com/wp-content/uploads/2012/10/001-subnetting-more-cisco-ccna-certification-study-tips-aids.png
-
Todd Lammle's Book
Hello Networkers, I am going through this wierd feeling now. I completed reading Todd Lammle's book and now practicing few test here and there. I some times see questions which Todd has not even mentioned about in the book. My question is is that book sufficient for all the concepts that official exam covers. I also bought…
-
Job Experience While Studying for CCNA
What kind of jobs should I try to apply for in order to get experience while I am studying for my CCNA? I will have an Information Systems degree by the end of the year, which is basically Half Computer Science and have Finance, So I know C++, Java, Python and SQL, financial analytics, but have no real IT hardware…
-
CCT vs CCENT
Hi, I'm new in Cisco and was wondering what is the difference between CCT and CCENT? especially if you a newbie in Cisco which exam will it be better to start of with? I already have N+ which I passed last year. Regards JB
-
How to acquire official certificate?
Hi I just passed CCNA 200-120 exam. Now, I sign up using pearsonvue. com But to acquire certification, I have to go to http://www.cisco.com/go/certifications/login to obtain certificate. However I cant login. I got my CISCO ID, registration ID and everything. I went to password reset. Then email I registered with…
-
Help! This STP scenario is driving me crazy.
Are the answers in this scenario correct? Why is it saying that SwitchA's Fa0/2 port is the designated port to reach SwitchC instead of SwitchB's Gi0/2? I understand that default costs for FastEthernet ports is 19 and Gig ports is 4. But what happens on a Segment with both FastEthernet and Gig ports? 1) Is SwitchA's cost…
-
ICND2 compared with ICND1
from CISCO website: 100-101 ICND1 90 minutes (50-60 questions) 200-101 ICND2 75 minutes (50-60 questions) What does that mean? Less simulations (scenarios) on ICND2?
-
Boson Exam
Guys Posting this for one last time. Please tell me if Boson test are worth it coz they are giving 25 % off on tests. I really wanted some practise and if experienced people or people who bought those before say they are helpful i will buy it by borrowing some money . I would heartfully appretiate any suggestions... Regards
-
Ine
I've had my CCENT for some time now and have been preparing for ICND2 with Boson and the Todd Lammle books. I've taken ICND 2 twice now and failed with my last score being 795. I score 100% on all 3 boson exams so I need something better then Boson as I feel it has only prepared for me for roughly 70% of the exam. What is…
-
What's the Freakin point of a Link-Local address?
Hola, an IPv4 address can be Over-simplified into 2 types: ~Public Address type. ~Private Address type. Public Address is routable Externally, Private Address is routable Internally. Nothing Shocking here. Now compare that to IPv6: ~Public Address equivalent ---> Global Unicast Address, (2001-3FFF):: . ~Private Address…
-
will the computes ping or not
Hi all I went for an interview and was asked a question in the below mentioned scenario. Three routers (R1, R2, R3) all connected using Ethernet cables. All of routers have end devices connected to then. Will the end-devices ping each other in case all the three routers have the same routing table. R1, R2 and R310.x.x.x…
-
Passed the 200-120 CCNA yesterday!
Passed the 200-120 CCNA yesterday!
-
Free CCNA Level Course
FREE COURSE: Learn basic Cisco networking | Network World
-
GNS3 launching their own courses!
http://academy.gns3.com/courses To start they offering their courses for only $15 too!
-
Will this work for a home lab for CCNA?
Someone has this setup for sale and I'd like someone more in the know to evaluate it's ability to be a home lab for CCNA study. WOuld I need anything additional? 1x Cisco 1760 router with PVDM-12 installed 1x Cisco Catalyst C3524-PWR-XL-EN 10/100/1000 POE (power over ethernet) switch - 24 10/100 POE ports, 2x 1000mb GBIC…
-
CCNET or CCNA
I certified net+ and going to prepare for CISCO cert. What would be better to prepare for ccent and then ccna or skip ccent and prepare for ccna since I certified net+
-
What can you bring to CCNA exam?
Hi guys for official CCNA exam, can you bring notes or something>?
-
What is your take on these two books?
Hello! First time poster here! You look like awesome community. :) I have decided to go for CCNA certification to boost my IT knowledge and start working towards better position. I have some prior experience from polytechnic school but it's been few years since I've touched Cisco equipment. I'm going to start with a book…
-
Where to start as a complete newb
I have a computer science bachelors degree, but no IT experience in routers and switches, would preparing for the CCENT be a good starting place or is there an even earlier point I should start at ?
-
Home Lab Assembly
I am wanting to peruse my CCIE certification from the ground up, starting at INCD1,and going forward. One thing I will definitely need is a lab for the necessary lab work. So I did a little homework and started looking. I found several "kits" all stating that it was "all I needed", but the cost was outrageous - who buys…
-
The "DO" command in cisco IOS
Does anyone else use it? I'm so used to using it that I have a feeling I will use it on the exams lol
-
Subnetting video
If you understand subnetting from a binary standpoint but are slow in solving the problem, watch this video. It's Godsent, in my opinion. https://www.youtube.com/watch?v=nB6Oir8rlkc
-
Studying for CCENT...
Hi guys, I have recently started studying for my CCENT and currently have the below 1. Skillsoft training material (inc mock tests) - provided access by company i work for 2. GNS3 (using in conjunction with Free CCNA Workbook | CCNA Labs, Practice Exams and More!) 3. exposure at work, supporting switches (3650) and routers…
-
Help With CCNA Security Please
Hello everyone I just passed my CCNA and wanna start with CCNA Security so bad , could you guys help to start with which book I should buy ? thanks
-
Question About Proxy ARP
Sorry for all the questions lately, but I'm reading about Proxy ARP and this little tidbit has got me confused From the book: "If a Proxy ARP-enabled router receives an ARP request for an IP address that it knows isn't on the same subnet as the requesting host, it will respond with an ARP reply packet to the host" When…
-
Proper study time/material for ccent
Hello! I've recently completed my network+(today actually) and am moving onto ccent to study next! I currently have Wendall odoms ccna/ccent 100-101 book with lab/practice exam and plan on getting boson about mid way through to cement knowledge I've learned. Are those 2 things enough to go off of and pass the ccent or…
-
Finally taking ICND1 exam today
Going to take this exam in about an hour. I am not nervous at all and I think I am well prepared. I have been putting this off for almost a year due to work and procrastination. Wish me luck!
-
DC Rack Rental Tips
Deep into my CCNA:DC studies and want to get more lab time in. I'm working with 5K's and 2K's (vPC's, FEX configurations) etc at work. But I want to get more time in labs doing things like OTV, FabricPath that will help with the exam. Anyone got any tips on places to get rack rentals - and ideally price guides. I've got a…
-
Switching Loop Created by empty CAM and a unicast frame?
Why does a MAC address not being in the CAM table cause a unicast frame to create a switching loop? From my book: "Frames that already had a destination address recorded in the MAC address table of the switches are forwarded to the port they're associated with; however, any broadcast, multicast, and unicast not in the CAM…
-
Question about summarization IP's
Hello, I'm doing some written labs from lammel's text for ICND1 (written lab 5.1) I came across a dilemma where I can't figure out what cisco's best practices would be. I'm to summarize subnets 192.168.1.0 - 192.168.12.0 and I know that I could easily do it with a block size of 16, but I thought I read that it is not a…
-
Passed CCNA R&S - Now Looking For Hard Labs/Sims to Master Content
Recently passed my 200-101(ICND2), but left the exam center feeling like a bit of a fraud. I studied hard, set-up a few networks in GNS3 and configured some real gear in my home lab. However after passing I still felt if I was dropped into a real world situation where all I was given is some generic info like "the network…
-
Simple CCENT labs?
Hey guys, So a few weeks ago I began studying for my INCD1 exam. I'm here at work tonight and we've got nothing going on, and my boss gave us a laptop, a Cisco 2600 series router, and a Cisco 3550 switch to play around with. Most of the things I've read online say that you really need at least two routers and a switch to…
-
where can I buy discount voucher for 640-554 test?
Is there any reliable seller of discount vouchers for above mentioned test?
-
failed IINS
Score: 794 wasn't surprised by the score as halfway through the exama good portion of the materials were french to me. In other cases, the questions were too vague, I studied rigorously for the past three month and have accumulated close to a 100 notes, I was allowed from work to set up a home lab which consists of 2 ASA…
-
CCNA Sec.. what's next?
Hello. Now thay I've passed CCNA Sec. What's next to boost my network&security career? Security+ For instance?
-
31 days before
Has anyone used the "31 days before your" *CCENT OR CCNA* "exam" book? I was wondering if it's a wise investment.
-
Labs max FA speed is 11meg
Hi Everybody, I'm at a loss. I can't find anything similar in a Google search. All my switches fast ethernet ports max out at 11meg a second. I have no idea why. Any advice? Thanks!
-
Amazing Free Study Resource - I wish I found this sooner.
Hi all, I'd just like to share the INE course (for the old CCNA) here. The reason for this is because some of the concepts are still the same, just pick and choose your videos. https://www.youtube.com/playlist?list=PLF991927DF086C27C The instructor is simply amazing, engaging and explains complex things, very well. Well…
-
Did I rush my ICND Test Schedule?
Ok I'm sitting at the day before my exam, and I have taken the Kaplan Seftest 4 times in the last 3 days and I have gotten a 79% every time. The questions have actually be varied, but I did notice a couple of testlit questions that were repeats. Anyway my question is, whats my chances on passing the real exam if I'm…
-
WHat's the SHOW command for...
Hola, Got a Question. In the snippet here, the Instructor does a Mouse-over to Show the Switch's ports & Vlans: https://www.youtube.com/watch?v=JjHDqKNxtpw&t=1m15s What is the SHOW command that can give me the same information? Gracias!
-
Big Changes in CCNA Security Requirements?
As noted in the other thread, I picked up the new CCNA Security 210-260 book, and it appears that Cisco is bringing back the requirement to have your CCNA R&S first. Even though that means more work and money for me, I am sort of glad they reinstated that because I think the requisite material should be known before…
-
Inter VLAN routing.
Hello everyone! This is my first post here, so please be gentle . So I've been studying for my CCNA (ICDN 1 and 2 route) for about a little less than a week. I have my own lab set-up consisting of 3x1841, 2x2590 and 1x3550, and I'm running to an issue. So I have PC1 and PC2 connected to switch 1 which is a 2950 on ports…
-
INE or IP Expert
Not sure if I've posted this in the correct location, thought the CCNA forums get the most views so I posted it here. I'm thinking of asking my company whether they will fund a subscription to either INE or IP Expert to help with my studies, through my CCNA/NP DC and on wards to my CCIE. I just wondered if people can speak…
-
How to Use Switch Layer 2 Ports on Cisco 1841 Router
Hi I am using Cisco 1841 Router with only one Layer 3 Fe0 port and 8 Switch Ports. I have given IP on Fe0 port which is connected to another router. Now I don't know how to use the Switch Layer 2 ports of the router. I have tried making one of the port as Access Port by switchport mode access and connected my laptop and…
-
Obligatory I passed ICND1 thread...
Took the test this passed Thursday, so yea...was lucky. I only read 18 chapters of the press book and saw about half the Chris Bryant udemy videos ($10) but I passed ...granted only by 11pts and I didn't even finish in time (only got up to question 45) but a pass is a pass right!? I had passed the old ICND1 4 yrs ago, but…
-
Local Interfaces not showing in Packet Tracer Sh IP route Output
Hello, I am very new to the world of Cisco and I am working on getting my CCNA R&S. I need your help with an elementary question - while studying , I observed that in most of the router the output of the show ip route shows both the subnets marked as "c" which means connected and also local address marked as "L" but I do…
-
Examination Practise help..!!!
Guys, I have been studying for CCNA 200-120 exam from past 3 weeks. I have completed 18 chapters out 21 in Lammle's book and completed 1/4th of byrants videos. I have also been actively participating in discussion just to test my knowledge. TO explain my current situation 'm a student and i can't afford practise tests…
-
Configure OSPF on a port, why when entering ip address of port it's minus 1
I'm reading Todd Lammle's ICDN1 and on his example for configuring (using wildcards) on a router, the IP address is -1 on the last octect. See below.. Router Lab B G0/0: 10.255.255.82/30 G0/0: 10.255.255.9/30 Fa0/0: 192.168.10.49/29 router configuration: #config t #router ospf 1 #network 10.255.255.80 0.0.0.3 area 0…
-
Long time lurker passed the CCNA!
Passed the CCNA (200-120) last Saturday! Thank you TE for the weatlh of knowledge, it definitely helped in my career change. I scored a 958/1000, I felt over prepared for the exam since I had 8 months experience in a NOC when I was an intern last Fall.
-
OSPF for the ccent exam.
Is this all I need to know for the ccent exam in relation to ospf ? 1.basic configuration 2.router-id (in the syllabus) 3.passive interface (in the syllabus) what about priority , cost ,redistribute command etc ?
-
Studying for Express Security Specialization NGFW
Currently on a 2 day training course for Express Security Specialization NGFW certification, need to get certified for company partner status. Last week I was on palo alto firewall training, I must say fork Cisco ASA sucks compared to Palo alto firewall well at least on how a person configures ASA's maybe someone that have…
-
Motivation group for folks studying and taking the CCENT in 3 to 4 months.
Feel free to use this as a journal, goal planner, or just general motivation group towards passing the CCENT. I'll be posting short-term goals in here for myself as a way to keep myself accountable. Good luck to everyone!
-
200-120 vs 100-101/200-101
Hello, I have just passed my Network+ about 2 weeks ago and am looking for the next certification. I have some very little troubleshooting experience on the job but no networking or any further than simple help desk type stuff. I am going to begin studying for the CCNA. Would you recommend I take the 2 part exams as a new…
-
is CCNA useful for RAN Engineer?
I've been seeing job opening for RAN engineers near my town but I have no idea what they do and what qualifications. Does anyone know what certification is useful for this position? Required Qualifications Associates degree in Engineering, Math or Sciences. 3-5 years of progressive successful development as an engineer.…
-
Best CCNA resources
Hi All, I was just wondering what resources you would recommend for the CCNA, feel free to list free and paid ones? Thanks in advance
-
Routing table question
Ok I dont get from following question why is only option C? its 10.1.5.65 which fits option B as well so why only C ?
-
Subnetting Question! Please Help.
Hello world. I purchased my ICND1 100-101 exam not too long ago, I am scheduled for August 17th! That being said, I need help... Subnetting/VLSM has been making my head spin for the past couple of days... The scenario is: Routers A, B, C, and D. Router A needs 60 hosts on one interface and 75 hosts on another interface.…
-
Very simple setup . . . PC - Switch connections, layer 2-3 switches
This is a real simple setup. Windows PC3550 Cisco Catalyst Switch First question is, if I want to determine if my switch is a layer 2 or layer 3 device, can I do this: SW2(config)#ip default? default-gateway default-network If I get this "default-gateway" as an option, versus default-route, can I therefore assume it is a…
-
Can I put two different network in a single switch?
Hi guy, Need you again So I have a switch with have 4 pc's connected to it. 2 pc's have IP 192.168.1.0 range and two have 192.168.2.0 Both are different network. So can pc's of first network communicate with pc's of other network? I tried in Packet tracer they are not pinging. I am doing right?
-
Interface Default Delay
Hello, I've tried to google 'Interface Default Delay', but in vain. Please, help me with it.
-
I Need A Good Tool for Memorizing all CLI commands on switches/routers
Was hoping I could find a good technique that someone might recommend for memorizing most of the imperative CLI commands for switches and routers. My ICDN1 exam is less than a month away (August 3rd, 2015) and the biggest thing I'm nervous about is remembering the commands. Does anyone have a really good tool or technique…
-
Question on Extended ACL
Hi guys, am new to this forum so thanks in advance for all the help! Am currently studying for CCENT/CCNA using Odom's OCG and currently on ACLs, but was confused by the questions and the answers given. When do we change an octet's value to zero? Only when the wildcard mask is 255 or when the wildcard mask holds any value?…
-
What is RTA?
I'm going through my Cisco books and CBT Nuggets but not finding RTA for ICDN1.
-
Prepping for CCENT
Hey guys and gals! I am prepping to take the CCENT, and thought I would document my journey here. I have been working as a PC tech for about the last year. I am hoping to move out of the end user support role and into the admin side of things, and thought getting my CCNA would be a good start. I am currently reading Todd…
-
Best Way to Prepare for CCNA Security
It's been a year since I passed CCNA and I've been thinking about getting CCNA security. I was able to get away with just using Packet Tracer and I think it CCNA Security requires more than PT to pass the test. Therefore, I was wondering, what's the best setup for studying CCNA Security. Thanks!
-
CCNA ICND 1 Free Lab Book Download
Hey fellow techie's I'm not sure if many of you remember but I posted a topic about a new lab book I was working on. While I did want to make something I could sell and monetize I did want to give something back to the community that helped me with all of my certifications. Moderators/Admins feel free to delete this topic…
-
VLSM is driving me absolutely out of my mind....please help if you have a moment...
I don't have anymore hair to pull out of my head at this point but here we go.... The problem in the book is asking me to find the subnet ID and Subnet broadcast address for 10.1.1.1 /20 (255.255.240.0) and I know exactly what to do up until getting the broadcast address. I know my Subnet ID is: 10.1.0.0 Then it goes up in…
-
Cisco router and 1 switch !
I have 3 Cisco 1800 series router, 2- 2800 series router, and 1- 2960 switch. i was wonder can i use all of this for practice on my lab. Any ideas for me to get more equipment for advance lab. I just want to focus on CCNA right now. Thanks all you !!!
-
CCNA Security/CCNP LAB
Hi Guys, Just wondering if it is safe to buy lap equipments in Ebay(US) for ccna sec/ccnp. Also can advise what type/model should i get for the above exams? Note: currently living in Malaysia. Thank you!!!!!
-
CCNA home lab or virtual???
I'm finishing up my studies at WGU....only 5 classes left....of those 5, 3 are Cisco. They do offer all the virtual stuff and my mentor says I can get by with that but I rely want to do the home lab thing. I've researched a ton and it all seems "halfway" straightforward on what to buy but.....when money is involved, I want…
-
What in the world in this error?
So this morning I turned on my cluster, yes I know it's 6 am. I'm a early bird. I had a dream about my lab and woke up and turned the spaceship on... So I seem to have this "%error opening tftp://255.255.255.255", and I remember from my reading that basically the router sending out a broadcast looking for a tftp server....…
-
connecting switches together
Why would you connect two switches together? what are the benefits?
-
Just scheduled my 200-120!
Was initially going to go the 2 exam route, but after landing my new job, decided to push forward and try to get it done so I can move on to my GCIH and Linux+. That said, I've been studying my brains out for the past month for the second half of the exam (spent about 4 months on the first half, at a less intense pace).…
-
Backbone cabling question
Hi all, I'm not currently taking the Cisco exams but am undertaking a Higher National Diploma in Computing. I've been using Cisco Academy software for CCNA Network Fundamentals as it covers a lot of my networking module meterial and I hope to complete the CCNA alongside my final year. Hopefully some of you folks would be…
-
VTP is difficult!
Note to self: when you plug in a solo 1721 router you find in your closet, erase the startup-config before adding it to your lab.....or turn on transparent mode.... Good thing Saturday I made tftp image backups to my ftp server on my NAS to get overkill practice of tftp flash saves...if I didn't I would have been cursing…
-
Nat pool deleting issue
HI every one I created a NAT for one of my labs. I am trying to delete it now but i couldnt. I cleared all translations and chcked for any active connections, but nothing worked. ROuter Output Lab_A>show ip nat translations Lab_A>en Lab_A#conf t Enter configuration commands, one per line. End with CNTL/Z. Lab_A(config)#no…
-
Passed ICND1 CCENT
Been delaying taking the test for a long time.. took about 1 month of hard studying and went for it! Operation of IP Data Networks - 100% LAN Switching Technologies - 55% IP addressing IPv4 and IPv6 - 100% IP Routing Technologies - 79% IP Services - 75% Network Device Security - 75% Troubleshooting - 71% Total Score - 828…
-
Certification Verification
Ok so I passed the CCENT but I am little bit confused does Cisco send me the paper certificate or do I have order one? and where do i get the verification number?
-
GNS3 labs which one are CCNA specific
Hi I've recently found myself unemployed and Im' looking to write a few certs. I thought now would be a good time to get rolling on my CCNA finally I'm wondering which GNS3 labs are CCNA specific or which labs you found useful when studying for your CCNA
-
POE In Router
Just a question: Is POE in a router used for powering the telephones connected to the router? I presume that it is only for IP phone? Or is POE used as a redundant power supply that replaces ac power? I am confused.
-
Ping failed in LAN - packet tracer
Hi, i'm started using packet tracer recently, so sorry if my question isn't in the level of this forum. I built a LAN with 1 router, 3 switches and 4 PC. Here is a picture of the network: The number of the routers start from 4 because I have another LAN in this project. so the problem is that from PC 3 and 4 there is a…
-
Extended ACL question 3
ACL 1.access-list 115 permit tcp 192.168.1.0 0.0.0.15 host 192.168.2.2 ACL 2.access-list 116 permit ip 192.168.1.0 0.0.0.15 host 192.168.2.2 was trying a simple configuration , the second one worked,the first one with tcp did not work, is tcp used only when I use port numbers ?
-
Ccent > ccna ?
I'm new to the Network side of things, I mainly dealt with Helpdesk positions and a little bit of desktop support. My question is would it be easier to just jump into the CCNA and try taking the 200-120 CCNA exam or would it be a lot easier to understand,grasp, and build a stronger foundation taking the CCENT 100-101 ICND1…
-
ASA 5510 access rule?
hi all - when i vpn in remotely from home, i get a vpn network address: 10.200.150.15 i'm able to ping and reach 10.200.40.x, 10.200.30.x, and a few other networks / vlans. however, i'm trying to access the asa fw who address is 10.200.5.1. i can't ping it, can't ssh. can't asdm. is it because i'm missing an access rule?…
-
Troubleshooting networks
Is there a certain "formula" that someone has that is effective when used to troubleshoot networks? This is my weakest area. Not that I don't know the material, it's just a lot of information that I think about that causes me to lock up. One problem I have is that I don't think of the simplest reasons first (such as a…
-
Extended ACL question 2.
Router(config-ext-nacl)#deny icmp host 192.168.10.1 host 192.168.20.2 ? <0-256> type-num echo Echo (ping) echo-reply Echo reply host-unreachable Host unreachable net-unreachable Net unreachable port-unreachable Port unreachable protocol-unreachable Protocol unreachable ttl-exceeded TTL exceeded unreachable All unreachables…
-
ICND1 and 2 study question
Hi all, Been reading few threads here and gain a lot of information but still after some advise. I just enrol into do my ICND1 and 2 course and with my package I have an Three Month Subscription to Cisco Practice Labs. Not sure what the best way of doing it. Should I attend both course and then study for the exams or…
-
OSPF Interfaces question
Hello From what I have understood OSPF sends LSA packets only on the interfaces that are added using the network command. Then an interface which is not configured will not be sending any Hello Msgs or receive those . My question is what is the use of using the passive-interface when the task we need is already done in the…
-
information on networking.
some link on cisco network blogs? confugurations,theory ,troubleshooting,etc.
-
exam numbers
I am studying from a CCNA Routing and Switching book and plan to take the two ICND1 and ICND2 tests as opposed to one test. My book refers to these tests as 100-101 and 200-101 respectively. Are these test numbers still used? It seems like people are using other test numbers on this forum. I am relatively new to this, so…
-
Subnetting question.
IP of 156.233.42.56 with a subnet mask of 7 bits. How many hosts and subnets are possible assuming that subnet 0 is not used?
-
when do we use ip nat outside ?
I normally use ip nat inside , never used ip nat outside ? when is this used ?
-
Need Clarification on NAT definitions
I feel like I understand the first two, but the second two I can't grasp. What is physically represented by the inside global address and outside global address? is it a host? on who's network? an interface on a router? who's router? which side of the router (inside or outside network?) etc. My Understanding: Assuming my…
-
Passed ICND1 today
Hey all, After a few months of studying, I made it through ICND1! Operation of IP Data Networks - 100% LAN Switching Technologies - 82% IP addressing IPv4 and IPv6 - 100% IP Routing Technologies - 71% IP Services - 75% Network Device Security - 38% (OUCH LOL) Troubleshooting - 100% Total Score - 841 (804 to pass) Needless…