-
OSPF Packet Tracer Problem
Problem: Router not appearing in show ip ospf neighors Scenario: I configured ospf on all routers in a similar manner, then tried pinging different networks to test my configurations. I found out I couldn't ping the networks of the 2 Fast Ethernet connections on Router 4(named BB1), but I could ping the serial interface…
-
cisco Configuration Assistance
I have some difficulties to download the cisco configuration assistance. can someone help me ? I need the exe to install it on my computer. thanks
-
2 routers - RIP (packet tracer)
Hey guys, first post here after reading the forum for a few weeks. Got my icnd1 this Friday, been doing lots of revision over the last few days. Watched all of the CBTNugget videos, done packet tracer exercises and read through the Cisco network acadamy as I am at college. I have this network which I had to create for…
-
Very Basic question but confused.
I am just setting up a basic network to monitor the election process in ospf. I am told in the lammle book to configure a basic network, but can someone please explain to me why this is not working, i have been away for a good 4 weeks so just trying to get back into the swing of things with my revision, and think im…
-
device discovery in a cluster
I'm trying to unlock this cluster. I need the names of the 3 PCs in the cluster and IP addresses for them. Its a packet tracer activity Its been a while since I touched routers and switches, I am wondering if anyone can help me or guide me in the right direction. The file can be downloaded here…
-
auto summarisation question
i connected two subnets 10.1.0.0/16 and 10.2.0.0/16 to router R1's fast ethernet ports . Then the serial port of R1 was connected to other router R2's serial port. the serial link between routers was in the network 11.0.0.0/8. I enabled rip version 2 on both the routers. So, naturally auto summarisation took place at R1's…
-
RIP Routing
Hello all, Like many new participants to this forum I am studying to attain my CCNA certification. Using PT as a SIM I believe I've ran into an issue with RIP. Here is an image of my topography along with my RIP config: The main two reasons my focus is pointed towards RIP is: 1. Router 2 isn't advertising via port…
-
Cisco 640-554 Portable Command Guide on Amazon
I just noticed you can get the new CCNA Security (640-554) Portable Command Guide on Amazon. Amazon.com: CCNA Security (640-554) Portable Command Guide (9781587204487): Bob Vachon: Books It has the new material which looks like an entire section on the Cisco ASA. Has anyone got this book yet? i might pick up a copy!
-
ICND1 study plan - need critiques
1 month into study so far. Spending any available time i have studying. 2 hours every night and about 2 hours during the day if i find time during full time job work. - Finished watching CBT Nuggets videos but i know it wont be enough - Reading the Wendell Odom book so far up to Chapter 6, but it's quite boring to be…
-
cheater
What should I do if I know someone cheated for the exam? What can be done and what would you do? Should I mind my own business?
-
ACL Clarification
I know I'm a CCNA and I should have known better , but I need a refresher. Is it true that regardless of which interface we implement the extended ACL rule on, we would always follow the INBOUND --> ROUTING PROCESS --> OUTBOUND logic? What I am trying to understand is why the host from the 192.168.0.0/24 network were able…
-
Fresh ICND2 Pass here
It's been a long journey but today I passed my CCNA. ICND2 was a beast of an exam to tame but I wouldn't change a thing about how I got there. I didn't get it the first time but I kept chipping away at it and got there in the end.
-
Exam Voucher Discount
Just in case you are looking to buy CCNA vouchers.... I just received an email with discounts.... ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Great Sale Prices for Your Cisco Exam Vouchers ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In this newsletter -- Cisco 640-816/822 Vouchers for $75 -- Please visit our new website:…
-
Cisco ICND1 Vouchers on sale - $75 (Early expire, test must be taken by June, 8th)
I just received an e-mail from GetCertified4Less about early expiration Cisco vouchers. Check it out - Cisco ICND Test Voucher for Cisco VUE exam 640-822 OR 640-816 of Retail $125 value outside of the USA/Canada for Guaranteed Discount Prices. I bought one already. I don't think I'm ready for the test yet, but for $75 it's…
-
Scheduled ICND2
Passed the ICND1 with a 912 confidently with little sweat, but I'm starting to get nervous for the ICND2 which is on Monday. I feel comfortable configuring and troubleshooting, but a lot of the ICND1 included knowing certain facts and such. Are there a lot of those for the ICND2(more than I know) or is it mainly the…
-
ccna security failed
I failed this test and from what I read here it was a cupcake test. I studied for over 3 months the last week was 5+hours a day. I don't know if Cisco is the way I should go after this I just bought the Voice book and I am not sure.
-
Will this work for a "CCNA" Home Lab to study?
I am currently studying for my CCENT, but I do plan on using a Home Lab when I study for my CCNA. Will the following suffice for a home lab? I have a friend of a friend who has these items for sale. Also, what do you think is a fair offer to make for these items? Cisco 2511 access router with octal cable Cisco 2503 Two…
-
A tale of two packets:Bob&Sally by CBT nuggets
I've just started studying for the ccent and have finished watching video#7 entitled a tale of two packets, bob and sally. The trainer's name is Jeremy Ciora and I know he is very well considered as an excellent trainer. He explains things clearly but video 7 has left me very confused and actually while watching the video…
-
does icnd2 focus alot on stp?
Hi friends , one question, does icnd2 focus a lot on spanning tree protocol and if so, do they want you to know the concept or you actually need to configure it too? Thank you.
-
Help with SSH
can anyone please help me how to configure (secure shell)SSH i.e to set password
-
Help on Cisco 640-461 preparation exam
Hi everybody, I'm getting ready to take my 640-461 certificaction exam. I've read the cert guide and I've find some question on Internet to try to find out how the questions are. But I don't really understand some of the anser to the questions. If you can help me with some of them? For example: "Users report that when they…
-
Console password not being accepted after configuring it
Hello all, Just turned on a factory default 2611xm router. Did some very basic configuration on it - changed the hostname and assigned a simple '1234' password to line con 0. and then i saved it the config and exit out of it. now when trying to access the router again, its not accepting my simple console password. any…
-
cisco packet tracer (ping) and request timed out
hi everybody I need you help to solve this problem because i have final exam after two days i built a network using cisco packet tracer v 5.2 it contain two routers , two switches and two pcs and i did all the configuration for each interface of each router ... and config the ip and gateway for each pc but when i am…
-
Router 2020xm does not load start-up config
I have this router that every time I reload it won't load the start-up config, it just resets itself to factory settings but, when I do show start-up config I see my config saved. Is there a command to tell it to load it? Thanks
-
ICMP Disable
[FONT=georgia,serif]Hi, how would you disable all responses to "ping" or "traceroute" commands on a Cisco router?[/FONT] [FONT=arial, sans-serif]Could you give me the command line?[/FONT] [FONT=arial, sans-serif]for example to add [/FONT][FONT=georgia, serif]additional[/FONT][FONT=arial, sans-serif][FONT=georgia, serif]…
-
icnd2 passed!
I'm excited, 953! I did this with A lot of prayer(thanks Lord) Ciscopress ciscopress network simulator Chris Bryant 12933 CBT training 640-816, I feel almost had me over ready for the test. All training he performed on real rack equiptment and his labs and troubleshooting was great!.
-
Passed ICND1 today
Wrote the test and I think it was a little easier than I had imagined. I can say that I would have been lost without the Boson exam sim that came with Odems book. It really drove home what to expect on the real thing. I studied on/off for a few months then dropped it, (not recommended),picked it up again and put in about 2…
-
IPSEC VPN on Cisco 2610XM?
I'm studying for the CCNA: Security exam and want to practice setting up an IPSEC site-to-site VPN. I have a Cisco 871W router and a Cisco 2610XM router. The 871W will support IPSEC but what about the 2610XM? I want to be able to connect these two routers and practice creating a site-to-site VPN. When I issue the command…
-
Odd https behavior from my router-- ideas?
Cisco 2610XM, maxed to 256MB for CCNA Security, running latest (so far as I can tell) Adv IP Services. If I fire up SDM and pick https:, the silly thing reboots. IP secure-server is enabled in the config. Ideas? Just added this memory (was 96MB before) and it had same behavior before the upgrade.
-
Looking for advice for study preperation.
Hey Guys. So this week I passed my Network + and am now going to take the CCent line for my CCNA. I have over 6 + years of coporate level IT experience but am now focusing on Networking and want to eventually become a CCNP. With that said here are my questions. At my current job I have tons of free time... usually only 2-3…
-
GNS3 toueble - router cannot ping physical pc?
I setup a a router in GNS3 with the loopback adapter and cloud connected to it. Now i setup everything up from the guides I have followed and from my physical PC i can ping the loopback interface and the router i have setup in GNS3. However, i cannot ping my physical PC or tftp to it from my GNS3 router. I turned off the…
-
Question about ip subnet zero
I am a little confused about ip subnet zero. I know the basics, that if RIPv2 is in play it is permitted, and that the default on Cisco routers today is default on. But I am having difficulty wrapping my head around the concept. I have read up on the Internet as well as Odems book and was wondering is someone can maybe…
-
My harder topic on ICND2
Hi guys , so far spanning-tree is the harder topic on ICND2 , everything else it looks pretty logical to me , I just cant still understand it well , I know the purpose of it, but the functionality inside it's like what the heck . I guest I have to read the chapter like 4 times more to sticky into my head. Anyone feel the…
-
Has anyone used Stormwind training?
Hi there, Has anyone used Stormwind training for Cisco certs? Keen to hear what you thought about their live web training sessions and virtual labs etc. Cheers,
-
CCNA Security Study Material
Just wondering what everyone says are the best books and manuals? I have access to CBTNuggets at work so I just need lab manuals and a good book.
-
ICND1 - Passed!!!
WOO HOO!!! Second time around and managed to squeeze by with a 812 (needed 804). I was glad to identify my real weak areas so I can go back and review those before I move onto the ICND2 studies. At this point, I'm just relieved to pass!
-
PPPoE via DSL issue - config inside, please advise.
Hello everyone, I've configured a 2611xm router with PPPoE to work with our DSL at work (we have a separate DSL connection for testing purposes). The issue that i'm running into is a little weird. The configuration (see below), very simple and straightforward, works fine, i'm geting the negotiated external IP address, the…
-
Thanks all!
Hello all, I have been a lurker on this forum for a couple of months now reading all of your suggestions for the ICND1 & 2 exams. I've finally taken the first step and test toward becoming a CCNA passing the ICND1 with 962 thanks to the support of everyone here. As far as the materials that I used for study; I read the…
-
CCENT Lab work book for Packet Tracer?
Anyone know of a good workbook for ICND 1 for packet tracer?
-
Starting CCNA journey!
CCENT Test - July 6 2012 Starting to study now :)
-
MCQ Questions is driving me insane! :(
Hey guys, i'm having my revision for the upcoming Internetworking exam next week. But i've some problems in the revision So i'm wondering if it is possible to ask you guys for help here in this forum?
-
need to learn ospf and bgp
got a few weeks to learn ospf and bgp to do a lab anyone got any links,tips, advise and best and easiest way to digest these concepts your guys input would be much appreciated
-
Cisco AP/Radius
I work on AP1200, I want to configure my AP that it uses a Radius Server authentication with MAC. how do ..? thank you
-
Lab hardware/software for CCNA-Security
Hey All, I need to lab for the CCNA:S exam, but a lot of the commands are not available on my older 25xx routers. I bought the Cisco Networking Academy Lab Workbook that has lots of labs, but they all revolve around having 3 x 1841 routers ($$$). The labs use IOS 12.4(20)T1 and later.…
-
passed ccna now on to voice, lab question
Is there a simulator I can use or is it only real equipment. My budget is extra tight right now. I ve been in the TDM world for a long time. At present work on a Nortel CS2100 TDM/voip large carrier grade switch. So no real Cisco voip to play with a work. Ive seen ccna voip labs on ebay for around $500 not sure what I'm…
-
CME SCCP and SIP
Hello all, I have recently started to study the CCNA:V track. I purchased the CCNA Voice OCG by Jeremy Cioara, and it is a wonderful book. However, when the book discusses setting up the TFTP services for the IP phone firmware files, it seems they are meant for using SCCP. In addition, all of the commands that are used to…
-
Some general questions about vtp and other topics...
So here are 3 screens i took from packet tracer. screen 1. i configured vtp to version 1 but it says its already in version 1 but it clearly says version 2 in the "show vtp status" command. is it a glitch in packet tracer or am i missing something. screen 2. i want to configure vtp domain to Ranet. but again it says that…
-
Passed ICND1 - Mastering Subnetting
Hi, If you guys remember a month ago i posted this thread: http://www.techexams.net/forums/ccna-ccent/76938-failed-icnd1.html that was right after i failed my first attempt on the ICND1 - Today i just took the exam again and i passed it with 850 :) i am excited and happy since i have no Cisco experience i ve always been a…
-
Wlan
I have a computer and connected the Internet across wireless. may my computer does not ip address?
-
Slippin My Mind
I am racking my brain trying to figure out why I can't make this work. Here is the topology: E4200 | 1760 | 2950 | 3524 I have the E4200 in fa 0/0 and the 2950 uplinked to the 1760 in fa 0/1 (WIC-4ESW). My PC is plugged into the 2950 but will not make it's way to the internet. Here is the 1760 config: interface…
-
The Bryant Advantage ccna vs trainsignal ccna
Has anyone used the The Bryant Advantage for study CCNA? Is it still of any value if you already have the trainsignal ccna ?
-
Trouble with an ROAS config
I did an Router-on-a-Stick (ROAS) lab and although I setup everything like the lab said, I can't ping from one subnet to another. I can ping the gateway from host to gateway, but not across subnets. I used my 2501s as host since I didn't have extra PCs. Here is a diagram of my lab and the sho runs. PC Left: R1#sho run…
-
Is there a lot of opportunities in new york city for networking???????
Hy guys , is there a lot of opportunities in the networking field in New York City ? I mean like NOC's . Thanks.
-
Help
I want to prepare for the CCNA EXAM this year, so I need help.
-
Your opinion pleaseeee
I am almost done with my icnd2 studies and planning to take my test in 2 weeks , now , I know that just with my ccna it will be very hard to find a job without previous experience , do you guy suggest me to jump to comptia A+ or a ccna like voice or security or just jump to ccnp ? I am a fast learner and so far I am doing…
-
New Gear, for CCNA/CCNP study.
I just picked up about 1/4 ton of switches, on e-bay. I know I probably should have posted before buying but just couldn't resist after customs told me that there is no duty on them. I know I still need some routers, but this is what I've got for switches, and the highest level of IOS they support. I know some of the IOS…
-
ICND2 Labs?
Anyone know of a good source for labs for the ICND2 Exam? My searches have come up empty and I don't have access to the Cisco networking academy for their labs anymore :/ Is there a vendor out there or something? Looking for some fairly challenging labs; I've got 4 2950's and as many 3725's as my PC's can emulate :D
-
gns3
hola, what ios's would you recommend for gns3 for ccna? had enough of packet tracer
-
not sure what route to take
Hey everyone, I passed my CCNA about a month ago and I'm really not sure what route to take now. I've been looking for jobs but a lot of the jobs seem to want a lot of windows based qualifications as well. So I've found a good Microsoft cert that CBT nuggets offers which is Windows Server 2008: Network Infrastructure and…
-
VTP Pruning impossible in packet tracer or Boson NetSim
Hy guys , I am having difficulties enabling VTP Pruning on both packet tracert and Boson NetSim , I am putting the command right ( vtp pruning ) and still nothing , anyone knows if this commands aren't enable on this simulators ? Thanks
-
Pinging Problem
Hi guys i'm currently studying for my CCNA which I hope to take in a couple of months. I'm playing around with the network topology you see in the attachment. I have no issues whatsoever pinging from R1 all the way to PC2 and vice versa. Pinging to the interface IP's as well as the loopback ip's for each device works fine.…
-
Passed ICND1! What now?
I took the test 5/23 and I was able to pass with a 837! Just wanted to say thanks. Reading post on the site helped to keep me motivated. I'm a little unclear of what I want to do now. I'm going to graduate college this fall with an Associates in CIS, but I have no IT work experience and the job market around me looks ugly.…
-
Is CCNA Intimidating to others?
So far I am wrapping up the final studys of ICND1 and moving to ICND2. Recently when I was going over somethings and I kinda had a scared feeling that hit me and I was like wow....if this seems to be hard to understand I can't imagine going higher into the networking side. Has anyone else felt intimidated by Cisco's side?
-
I got a job offer , helppppppp
Hi guys , I am a CCENT already , working on my icnd2 , I am studying hard to have it by the end of june. I have an offer in a cable company to start as a cable technician , like doing voice and data installations but I think all this is going to be layer 1 operations , now, my question is this ,do you guys think it is a…
-
Inter Vlan Routing Help
Hey Guys, I was doing a CCNA lab with intervlan Routing. The network topology is x3 switches (1 vtp server , 2 clients) x1 Router x3 End device Computers x1 Tftp server Basically i setup everything correctly , the computers on the seperate vlans can ping each other. But here's my question, should the switch be able to ping…
-
Free CCNA Voice Bootcamp Course
For those of you that are working on the CCNA Voice:
-
Odom OSPF LSA types
Wendell Odom describes the two main types of LSAs as: Router LSA: Includes a number to identify the router (router ID), the router's interface IP addresses and masks, the state (up or down) of each interface, and the cost (metric) associated with the interface. Link LSA: Identifies each link (subnet) and the routers that…
-
VTP (Pssword)
Hi All, Been doing some labbing on VLANs and VTP and a bit puzzled. I have Switch 1, a VTP server with a domain name set and a password set. I created a few test vlans. I then take Switch 2 with no vlans expect the "out the box" defaults. I had it in transparent mode first, then converted it to client mode. Now I…
-
Preparing for CCENT - please evaluate my study materials
i am studing for ccent, i have a todd lammle 7th edition book / wendell odom book and cbt nuggets videos / and i plan to work with packet tracer for simulations.Is that enough study material for passing ccent ?
-
How many people are certified?
Does Cisco release any statistics on how many people are certified for each exam? I was just wondering.
-
ICND2 next wednesday
Wish me luck, I keep delaying and putting it off, so I just set it up. Keep you posted!
-
Cisco Networking Academy-CCNA Exploration
Hello, I am considering going to the Cisco Networking Academy and taking their CCNA Exploration course. I have read MM N10-005(Loved this book BTW) book and once I was done, I was asking myself: Do I really want to take this cert?" So I looked into the Cisco Networking Academy. I do know that I want to take the (2) test…
-
Passed my ICND2 today!!!
I didn't do as good as I would have liked with a 868, but I'm still happy I passed. I can always learn more as I go along. I'm so drained I don't know what to do next.
-
640-460 vs 640-461
Question - Would studying the 460 material (becuase I like the format...) overlap with 461? Work bought this global knowledge 640-461 cbt course and it feels more like cisco marketing rather than training, but I have a 640-460 book and wasnt sure if it would be enough to cover 75% of 461 any suggestions
-
anyone ever received 1000
Ive taking Nortel and others I did get a 100%, but Cisco answers are sometime so close were 2 or 3 look correct. Has anyone ever received a perfect score.
-
VLAN TRUNKING between switch to router
Hi, I am currently trying to do the ccna integrated skills challenge. I stuck at the inter vlan routing part. consider only branch 1 the router config :interface FastEthernet0/0 description Admin VLAN 10 no ip address duplex auto speed auto ! interface FastEthernet0/0.10 description Admin VLAN 10 encapsulation dot1Q 10 ip…
-
'Bout freaking time!!! Passed ICND1
Sooo nearly five years after i took my first networking class, I've finally got around to actually getting certified. I'm a little embarrassed that it took so long, but at the same time I've never felt as confident in my knowledge/skills or as serious about this as I do now. Anyway, on to the goods: 937/100! Mind = Blown!…
-
VCP5 or CCNA Voice
I just passed my CCNA today. I don't know what I should do next. I was going to try and knock out the CCNA Voice exam, but I'm hearing how VMware is becoming pretty popular. I currently don't have a job in the networking field, but I do work in the IT field as tech support. What are some of you guys thoughts?
-
VLANs
not sure how many vlans i have. could someone clarify. when i do: a) sh vlan brief: vlan 1 active ports ... vlan 2 active ports ... "" 3 active ports ... "" 4 active "" 5 active ports ... 9 vlans displayed (including 5 defaults) b) sh vlan summary Number of existing VLANs : 9 c) sh ver 2 Virtual Ethernet interfaces d) sh…
-
Memorial Day Sale: Buy 3, Save 50% from Cisco Press
Cisco Press Memorial Day Sale: Buy 3, Save 50%
-
4 yrs call center tech support xp... what should I look for after getting the CCNA???
Hey guys, I'm getting ready to begin studying for the CCNA but I'm not too sure what to do after I get my CCNA... i don't have major networking exp... I have a bit of hardware/software xp and the most exp I have is working Tier 2 Tech support in call centers for 4 years...what type of position should I look for when I get…
-
Trunking Modes
What is the deal with the Nonegotiate mode? I know it is ready to trunk, but is this not just the same as "on" and "desireable"? All are ready to trunk?
-
OSPF vs EIGRP
I am trying to understand why each routing protocol converges the way it does. I understand EIGRP can have multiple backup routes stored in its topology table. This provides for quick convergence when the current route is no longer working. When a route is no longer usable in OSPF in recalculates the cost based on the LSA…
-
First Post CCNA ICND1
Hello everyone, I am 48 hours from taking the ICND1 test. i will stop reading 24 hours before the test. any advice as a test taker specially that's my first attempt on a Cisco type test. am used to compTIA and Microsoft. i actually took the course from a local site and used Transcender along with Kelements labs. am passing…
-
Router Choices for the 640-554 IINS Exam
Hello. I passed the CCNA exam about a month ago and have since been studying heavily for the CCNP Route test. However, I've been wanting to complete the CCNA: Security for quite some time now. I have enough funds to buy some things that I need to successfully prepare for the test. One thing in particular that I'm…
-
computer style course
For CCNA Voice, I really can't afford CBT nuggets @ 499 right now with another 500-1000 for a lab. Any other thoughts, I'm getting the ciscopress book but like another source. I'm using Chris Bryant for my CCNA and no problems love it. I see trainsignal has a ccna voice for $297 but its only 9 hours long. Any other…
-
Beginner ccna
Hi I'm a guy that wants to get better at networking. My level of network skills are basic, the books I've studied are Routing Protocols and Concepts, Network Fundamentals and now I'm reading Lan Switching and Wireless. So if there is anyone out there who is interested in discusssing Networking through skype or make smal…
-
CISCO CCT - Entry Level (review)
My employer is a CISCO partner so given all the perks we get I thought I'd take this exam (and I was just curious). I bought the course for $299 and sat down to see what it's like. To be fair I'm past the entry level stage of routing so I might have had some advantage. This is a great little entry level exam. The CISCO…
-
Help Setting Up Voice system to current home network
Hello - I am new to this type of stuff. I am trying to do the following. Cable Modem --> WRT54GL (DDWRT Firmware) --> WS-3524-PWR-XL-EN <-- Cisco 2610XM or 3745 ^ Cisco IP Phones x3 & PCs My network guys at work don't deal much with voice so they don't really understand what I was trying to do. But I want to be able to…
-
Acl question here!!
-
Which one should I take? 640-553 or 640-554?
Just noticed that the last day to take 640-553 is September. I am wondering if i am interested in getting the CCNA Security, which exam should I take? Option1. Prepare and Take the 640-553 before September Option2. Prepare the new one: 640-554 In addition, If I decide to take 640-553, will it becomes invalid in my Cisco…
-
Not sure if I should keep going with the CCENT/CCNA Studies
Hi, I decided I wanted to enter the IT sector as for the last 4 years I have taken time to bring up my son who had additional needs. I'm now in the position where I plan on heading back out into the big bad world summer of 2013 (Son starts school) and I really want to do something different with my life. I started my…
-
Passed ICND2
Finally got my CCNA after studying on and off for years. Two weeks ago i failed the ICND2 (still not sure how) with a 790 and today i finished it off with a solid 902. Now i can finally move on to some more advanced stuff which i already do at work.
-
Frame Relay
Hi all. I have a query about Frame relay. CBT shows mapping an IP to the interface for frame relay, where the IP is the one you trying to Reach Now I'm using packet tracer for everything, so have used a tutorial for frame relay config: 3 routers, each has a sub interface on s0/0/0 as a point to point link (mesh topology)…
-
This exam is really stupid
Guys, I'm sorry to say but this is the most poorly written exam I've ever taken. I've taken the CCNP BCSI/BCMSN composite exam, CCNA 640-802, and 640-533. I felt all of them were a fair test. The only one I failed was the BSCI/BCMSN composite exam. This one however makes you memorize things like who cares. Like how far can…
-
Wait until new books are out or start to study now?
I just finished up my CCNA and was hoping to jump into the CCNA:S but I quickly learned that the 554 exam is coming out soon and the study guides not until this summer. Does anyone know how much of an overlap there is going to be? from my brief reading i know that they are adding in ASA Firewalls but what else? should i…
-
Lab hardware?
Hey all! Ive just started down the CCNA wireless track. Working with live Cisco equipment greatly helped me study for the CCENT and CCNA. Ideally, Id also like to use live equipment in some respect when studying wireless. Is there any affordable Cisco wireless equipment that you all could recommend for lab use? I looked at…
-
Just wondering if CCNAs actually configure WAN technologies?
Hey guys, I am in the WAN technologies portion of my CCNA study right now, and I am just kind of wondering if associate level techs actually do work and configuration on WAN connections. It just seems like to me, and this is just my assumption as I don't currently work in the industry, that if a company is large enough to…
-
InterVLAN Routing Help!
Hi there, I am using cisco catalyst 3750 series (POE-4 switch. I am given a scenario to test out. But there is some problem. Requirements after connection: PC1 in VLAN 10 able to ping PC2 in VLAN 30 and vice versa too. I tried the approach as stated in the layer 3 switch in ****, but i still not able get the hosts to ping…
-
Mr H
I have started to study CCNA to get a job in networks. Do you know where i can download free CBT nuggets video's to watch. Also where can i download the PDF versions of Cisco books. Any help is appreciated. Thank you.