-
Some one tell me what's going on please :)
I have a client on the 192.168.5.0/24 network and a server on the 172.17.1.0/24 network.. if I run a ping from the Linux client to 172.17.1.11 I getaaron@pch03065:~$ ping 172.17.1.11PING 172.17.1.11 (172.17.1.11) 56(84) bytes of data.64 bytes from 172.17.1.11: icmp_seq=1 ttl=63 time=5.71 ms64 bytes from 172.17.1.11:…
-
CCNP or CCSP
I have a bit of a dilemma. I work for a large consulting company and the client that I am working with requires a professional level Cisco certification if I want full access via TACACS. I have always planned on pursuing the CCSP, which would fulfill this requirement. I have been sitting on my CCNA for a few years now, and…
-
Ssl vpn - asa
Hi All, I need to know how to setup a SSL VPN Service using ASDM on a Cisco ASA 5510. Can anyone help? :)
-
EIGRP auto summary
Just came across this on Jeremy of CBT nugget fames new joint blog EIGRP Auto-Summary Now Disabled By Default | tekcert.com All I can say is Thank God!! :)
-
PVSTP question
Hi, What will happen if on one switch we have PVSTP+ implemented(cisco switch) and on the other we have only STP(non cisco switch). I think that the PVSTP will only communicate on VLAN 1. Any ideas ? Hints? I MEANT PVSTP+, sorry could not change the Topic neam
-
Qos honor
Say i have Router 1 that is setting and Marking traffic on an interface that is a P2P connection. Another router, Router 2 that connects to R1 over P2P. On that connecting interface i have no QoS commands, just a vanillia interface. When R2 recieves traffic from R1 and sends it out of its LAN interface, which is also…
-
Site to site VPN NAT?
Hi all, We are going to configure a site to site VPN between our company and some of our critical suppliers. This is mainly for support purposes. Is it best practive to NAT their traffic as it enters our network? If not, it seems odd to allow traffic from various IP ranges to pass around our network. This is assuming non…
-
Difficulty Level?
I just got my CCNA and my job is sending me to a 16 day CCNP boot camp. First question, in terms of difficulty how would you rate the individual tests vs the CCNA composite test? Is it like taking three CCNA test in terms of difficulty? Or are they a little less rigorous since you have to do three of them? Also, any advice…
-
HSRP - Config/Template/Primary - Failover etc.
Hi All, I am implementing a Primary/Failover Cisco Router scenario that will be deployed into a live environment. This is my first time I am working on a Primary/Failover solution, could you please help me with the configuration and any additional works that I need to consider. I believe I need to use HSRP for this to…
-
Dial 9 for the Outside World…(only)
[PHONE RINGS] Frantic Caller: “every time that I try to call Rosa’s extension @ x office the police show up” “it only happens from my phone; Pam can call her with no problems” me: “hmm, that’s odd – can you walk me through how you are placing the call?” Frantic Caller: “well, I dial a 9, then the extension 1100…”
-
CCNA - Element K
Just wondering if anyone has ever used Element K to prepare for their CCNA. I know someone who is currently using it to study for their CCNA but I have never used it so I was just wondering about the quality of their material.
-
New CCNP lab. What else?
Hello all. I'm not sure if I have what is needed to pass SWITCH, ROUTE, and TSHOOT. Any suggestions on what else may be needed? Or comments? I have the following: 2 Cisco 3550-EMI's 2 Cisco 2950-24's 2 2610XM's with 12.4 1 871W 1 2509 (TS router) /W octocables Money is obviously an issue, so just looking for the bare…
-
Passed the QoS exam
-
RSTP Question from Switch Foundation Learning
Forgive me if this is a terrible question, but a diagram in the switch foundation learning book has me a little confused. According to what I thought and everything I can find, there can only be one designated port per segment in RSTP. According to this diagram (comes from the book), there are 2 DP between sw3 and sw5 (the…
-
ISL Native VLAN
TE, I just finished reading the Implementing Switched Networks Foundation Learning Guide. Now I'm going through and doing a review to see which areas that I may be weak in. I looked at the review question and it states: "True or False: It is important to have the same native VLAN on both switch link partners for ISL…
-
CCCNP SWITCH book grumble
AS we know CISCO are getting hot on planning in the new CCNP track, So one of the topics is what does good network management archive? and it lists 4 points in the book... now I would think things like, increase availability of network, reduce managment over heads, track the traffic, reduce costs, + 100 other things. but…
-
IPSec - Site-to-Site Tunnels
Hi All, Does anyone know any good websites that explain the process of an IPSec VPN Tunnel, how to configure them on Cisco routers, CLI commands explained and troubleshooting as well? :)
-
UDLD w/copper interfaces?
I've been googling and have run accross a few conflicting search results. Is UDLD commonly used on copper media between switches or is it really only used on fiber?
-
Disconnect from Service-Mod Session Through Access Server
OK, so we’re connected to R1s console port via an Access Server. From there we need to open up a local session to a service-module, say AIM-CUE, or NME switch module, is there any way to disconnect from the service-module session without killing the session between R1 and the Access Server? Ctl+Shift+6+x closes the entire…
-
Foregoing the NA Security Exam
After recently certifying for my CCNA R+S exam, (about 2 months ago) I began the path towards the 640-553 Security Exam. After reading one of the few Cisco security books available, (I purchased the latest Sybex book authored by Tim Boyles) listening & watching Jeremy's CBT's and reading up on some additional reference…
-
Dial plan configuration
I have an issue where one particular number from one particular partition is not being passed by CCM. We are using an old 4.x version of CCM (yea, an update is planned... don't get me started.) and have 9.@ configured on the partition. I'm trying to troubleshoot the issue, and so far I have come up with the following: We…
-
Decent router for CCNP study
I don't have a lot of money, and I was wanting opinions on what a good router is for completing the CCNP? I see some cheap ones on ebay, but I don't want to get something that won't/can't do the work an NP required. Thanks.
-
Asa lab issue
I have the following LAB set up. LAN1751 connected to the Inside interface of an ASA 5510 and a WAN1751 connected to the outside interface of the ASA 5510 I have included a JPG. From the WAN router, I can source ping from Both Subnets and ping the ASA OUTSIDE interface. From the LAN router, I can ping the INSIDE interface…
-
Question about the new track
How much emphasis is placed on MPLS on the new CCNP track? The same as before? And QoS?
-
Whats the difference
Question asked in book is What steps to take to prevent VLAN hoping Answer A. prune the native vlan off both ends of trunks B. Prune native vlan from the trunk. Book says answer is A, but what is the difference? if possible what's the configs to achieve both? cheers
-
CcDP from CCNp
hello, i figured I 'll go straight to the source. There wasn't much information on the cisco site. Having an active CCNP ver 3 I believe. What is needed to complete the CCDP? I heard you need a CCDA first is that true?
-
Cvoice - 642-432
Hi Guys, I have done some searching but I cannot find anything approriate to my circumstance. I have been away for a while but I am glad to see the forum is still alive and kicking. I have finally decided to get my CCVP after being distracted by the CCNA Security. My question is, I have my CVOICE 642-432 and my CCNA do I…
-
4x Cisco 3400 Switches
Hi All, I just got 4 3400 switches to play around with for a while, maybe a day at the most... Any ideas on what I should/could do with them as far as labs are concerned? Regards, David
-
Best way to "load balance" multiple internet connections
Not really a CCNP topic, but figured I would see if anyone had any ideas. I have a router which I use multiple PPPoE DSL connections on. The idea is that you have an inside user using the LAN IP of the router as its gateway, and then the user is NAT'd to one of the WAN dialers. The config works, and uses route-maps to…
-
Where to dl the BCMSN test engine (Cert guide)
I'm reading the BCMSN guide and want to use the test engine that comes bundled with it. However, I don't have a cd drive. Can I download it from somewhere or could any of you share it? I'm not asking for warez, I have the reg code, I just need the actual app.
-
RADIUS server specs
Hey everyone, I am going to try and spin a RADIUS server implementation in my work environment. I ran a test configuration in a VM and GNS3, and I plan on scaling it a little larger tomorrow. I am confidant I can get it up and running, but what should I run it on? I plan on using Ubuntu Server as the OS, and freeRADIUS to…
-
Etherchannel help
Hello all! This might be a bit of a newbie question, but I always had a hard time with etherchannel and HSRP/VRRP/GLBP. If I only set (conf-if)#channel-group 1 on each of the interfaces I want in the Po and don't stipulate channel mode, what will happen?
-
strange HAPPENINGS
I have a router with two subinterfaces set up on it int f0/0.900 and f0/0.922 each with a seperate network attached. now devices in both netwroks can ping there respective interface on the router, but the router can only ping devices in the network connected to the 900 network? The router also acts as a fire wall (1841…
-
Having Trouble Redistribute from OSPF to BGP
I'm doing a lab for my TSHOOT test and I trying to do redistribution from BGP to OSPF and I'm trying to do default-information originate from OSPF to BGP. My thinking is that when we type the default-information originate the default router will propagate with the OSPF process, but I don't see that is propagating(I'm…
-
Sip Translation
Well its been kind of dead in here lately so I figured I would post something you guys/girls might want to read up on. Sip Translation profiles ( Sip message translation rules) These rules become extremely applicable when used with ITSP's and other Voip-to-Voip connection methods. If you want to see debugs / configurations…
-
SWITCH official cert guide practice exam
Who here has the SWITCH official cert guide? I bought the foundations book which I believe did a pretty good job explaining everything. I bought the Odom books for CCNA and his practice exams were awesome. Is the practice exam in the SWITCH cert guide worth a damn? It's basically the only reason i'd buy the book.
-
Lunch with a CCNP
Hey all! Well today I purchased the three new Cisco Press ROUTE/SWITCH/TSHOOT books in preparation for my 2011 CCNP goal. It got me thinking about a friend of my little sisters who's a current CCNP working for Qwest. I asked her if she was available for lunch to ask her questions about CCNP preparation and what it's like…
-
CCNP level Frame Relay book
Cisco Frame Relay by Jonathan Chin Amazon.com: Cisco Frame Relay Solutions Guide (9781587051166): Jonathan Chin: Books It's out-of-print, going for $60 plus lately Great book, I've been reading it online with my Safari subscription It's distracting me from my ROUTE book, but it's somewhat related to the studies If you see…
-
OSPF Problem Unknown routing protocol on a 3550
I have a problem with a 3550 switch. When I try to use OSPF, Im getting Unknown routing protocol. This is my IOS c3550-i9q3l2-mz.121-13.EA1a/c3550-i9q3l2-mz.121-13.E A1a.bin. When I type router ? I see OSPF there, so I don't know why the switch is not taking the command. Any help?
-
What I'm doing wrong with IPV6 RIPng
I attached a image of my topology. I have problem with router 8 with not learning IPV6 rip route. Both Router 6 and 7 are learning, but not 8. Router 8 config: Current configuration : 987 bytes!version 12.3service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname…
-
VoIP question
CALL AGENT and Gatekeeper. What's the difference, in the foundation guide the descriptions are almost identical and when I look them up in google they seem to be the same thing as well. Any comparisons between the two would be nice.. Cheers Aaron
-
Frame Switch?
I have been looking over the CCNP material and reading posts here looking for any mention of Frame Relay, but not finding it. Am I safe to sell my 2610 w/ NM 4AS that I used for CCNA? I am going to buy a L3 switch soon, and might sell a few things to help pay for it. Current lab setup: 2-3640 1-2620xm 1-2610 FR 1-2511 AS…
-
CCIP track - Please help me.
-
TSHOOT shot, CCNP got.
Crazy that it's over... can't believe it! I built and rebuilt the topology many times over from the ground up and I would recommend it to anyone going in to take this exam. Bing bong, it's beer o'clock!
-
TSHOOT Submitted 45 min to the 1st round
After last weeks No Contest ruling in the exam. I dominated the exam. After thinking about the best approach, all I can say is get a lab in packet tracer or GNS3. Or use the new Boson Netsim Tshoot exam. From there practice a sound troubleshooting strategy. I will get mine posted in a blog soon. Check the blog below…
-
How's the quality of those eBay $10 128M memory
for 1760/26xxXM/36xx? They are dirty cheap (even w/ 1-year warranty from the 3rd-party manufacturers....) but I don't want to "burn"my gateways. A year ago I bought a VWIC-2MFT-T1. None of my routers detects it, LOL. Thanks for your experience!
-
Switches with MT-RJ FX Ports
What type of cabling do I need to connect two switches with FX ports? For example, two Cisco 3550-24-FX switches. I know you use fiber cables with mtrj connectors. Do they make a crossover version of these? I heard you can change the polarity but most information online is confusing.
-
Issue on VPN Clients registering their home network IP address on the DNS server
Hey guys, I decided to create a new thread in regards to an issue I am having with our VPN 3000 Concentrators, I included the last thread since the title is and description is vague. http://www.techexams.net/forums/ccnp/57576-vpn-3000-concentrator-users.html History: VPN clients connecting to VPN 3000 concentrators, gets…
-
SWITCH exam
For those who have taken the exam I have a few questions. After reading Jeremy's review on the ROUTE exam it sounds like a pretty brutal set of new exams, but having professional experience now is the real advantage from the post he made here: Cisco ROUTE: Brace Yourselves! - Cisco Blog So for someone who has taken this…
-
Unsure where to go
Man it's been a long time since I've logged into here, but I definitely need some advice with some direction. A whlie ago, my goal was to get the CCIP then move to the CCIE but unfortunately real life has been in the way for a while so I haven't had the time to do much studying. Fortunately I was able to nail the QoS exam…
-
OSPF Design Recomendation
Hey guys, i have the following issue with a client and i would like to know your opinion or recommendation. Scenario: (Foundry)Switch A ---10gig Link to a (OSPF cost 1)(Foundry)Switch B 1GigLink from Switch A to Switch C////////1GigLink from siwtch B to SWitch D (Cisco) Switch C---20gig link to a (OSPF cost 2)----(Cisco)…
-
Unsure where to go
-
Catalyst switches
Here's a question that's been bugging me that I should know already. What's the difference between a regular switch and a "catalyst" switch? I've seen it often enough, but I never thought to ask about it.
-
VoIP simulators out there?
I know that, for example, Boson has their simulators for CCNP, which are really good programs for simulating actual lab equipment. Great stuff if you're studying routing and switching. But does anyone know if there's a program out there which does the same thing for the CCVP? (I'm not talking about VMWare). It seems that…
-
WRED dscp-based - quick question
So I see the minimum threshold in WRED is reused in each AF class. example: dscp min threshold af11 32 af12 28 af13 24 af21 32 af22 28 af23 24 Does this mean that AF23 packets will be randomly dropped before AF11 packets? This just seems a bit hard to wrap my head around.
-
TSHOOT GNS3 .net Topology to offer
Hi, I'm only one test away from the CCNP Certificate. I'm getting ready to start studying for the test, so I decide to create the Cisco Tshoot topology on GNS3. I'm using 7200, 3640 and 1700 routers. 7200 I used them for the routers, the 3640 I used them for the switches and the 1700 for clients and server. I would like…
-
How much it cost to buy CCNP lab equipment
I am thinking of prepairing for CCNA and CCNP from my home. I just want to know how much the setup will cost to build the home lab. Can simulators be enough to do that
-
WRED dscp-based - quick question
-
CCVP track - Help please
Hi Guys, I will plane to get my CCVP certification, but I confused about CCVP track, should I do CCNA-Voice exam (640-460) before moving to CCVP track or I taking CVOICE (642-436) and that exam give me the CCNA-Voice certification also.
-
EIGRP Metrics
Does EIGRP's Metrics update? Meaning, if I have a L3 switch that knows of two routes, one to 1.1.1.1 and one to 2.2.2.2, if the link to 1.1.1.1 is currently the selected route but the link degrades to the point of being almost useless but is still technically up/up, will it switch to 2.2.2.2? I know it is part of EIGRP's…
-
Just IPS left for SP
Tackled the SNAA today... killed it. 923. I've been after this one for about 3 months, and am fortunate enough to use five-pairs of ASA appliances in day-to-day duties, 5520's, 40's and 50's. IPSec VPN's, the AnyConnect SSL Client, certificates... own it all. I mostly used the Cisco Academy "Securing Networks with Cisco…
-
NFAS config questions - ISDN PRI
Hey Yall.. anyone got experience with setting up NFAS ? here is my current setup and curious to know if this works.. i wont have a chance to actually test this for another few days due to work but if someone can chime in with a yes or no lol that would be helpful. controller E1 0/2 <> BR2 controller T1 0/1 <> BR1…
-
HREAP access points
I know that these AP's can carry on working if they are cut of from there WLC. But what happens when the WLC is avalible? with a standard controller based AP, all data traffic is tunnelled over LWACP or CAPWAP link to the WLC. Now with a HREAP the WLC may be across the wan link? I assume in this case the HREAP deals with…
-
VPN 3000 Concentrator USers
Hey guys, has anyone of you had issues with VPN users registering their local computer to the DNS Server as a result to multiple A record. Example host1 - 192.168.1.101 host1 - 192.168.1.101 host2 - 192.168.1.101 I am trying to figure out where to begin troubleshooting, any idea will be appreciated.
-
cool new network cable
Check it out Looks good for your tool bag or for lab use. ThinkGeek :: Universal Network Cable
-
key chains
Setting up the keys/key chains for EIGRP seems to be a new topic for ROUTE vs. the BCSI I think it is covered for OSPF too, but I haven't got to OSPF studies yet Anyway, I've labbed up keys and today spent almost an hour troubleshooting an authentication failure. The lab had worked flawlessly for about a month and I could…
-
Upgrade CCNA Lab to CCNP Route Lab
Goal: To be able to use my lab for all the labs for the CCNP: Route in the Cisco network academy curriculum. We have equipment in my class but there are so many labs it would be very convenient to be able to lab at home for whatever labs I do not finish in the classroom. Current lab equipment: 1721 /w WIC 2T x1 2501 x1…
-
Tshoot Exam tomorrow
Wish me luck. last week has been rough haven't been able to get the study in that I want. I have used GNS3, route, switch cert books.
-
Start labbing for CCNP Switch
Ok, I want to start labbing for the CCNP switch. I have the following : 1 x 3550 3 x 2950 However I can't think of many scenarios / setups to try ! Can anyone give me some advice ?
-
IOS Version
I am setting up a lab, what are the IOS versions that i am supposed to be using? Router: 1700 2811 1841 Switches: 2950 3550 And where can I get the most updated versions? Thanks I love this place man :)
-
Route exam Vs BSCI
Hey all, Please can anyone who has aquired the ROUTE exam enlighten me on what the main differences are Vs the old BSCI exam. I've compared both exam topics and can identify the exam has excluded ISIS & Multicasting. New topics are Broadband technologies, VPN's, IPsec/GRE which is pretty clear cut. The confusing or concern…
-
My study lab: 5505 with IPS?
I posted this over in the Cisco Learning Network CCSP forums but there's usually not much activity there, so I thought I'd mirror the post here: ... I currently have an old 1700 series router between my ISP and home network. While I can greatly expand my home environment using open source alternatives, I figure I can equip…
-
Home Lab Remote Access
Hey guys, I am trying to figure out a solution to be able to telnet to my home lab, I am thinking vpn, ssh via http is also an option for me, I've thought about the following devices. Adito VPN VPN on a 2611 XM Router (No idea if this is even possible) Access Router (I have not used this yet, but I need minimum 16, it…
-
CUCM 4.2 Call Flow Question?
Hi Guys I have been asked to look for a solution to this request and I am not really sure where to start I have looked through the "Cisco Unified CallManager Features and Services Guide, Release 4.2(1)" but have not been able to find what I am looking for. Environment Call manager 4.2 Unity "Yes there is an upgrade planned…
-
Hello and passed 642-813
Hey all.. thought I would say hello to everyone on the forum. I have been to this site quite a few times but never registered until today. My thread was removed last time so I'm assuming I may have been a bit too descriptive about my SWITCH exam earlier today. Sorry! Anyway, passed the SWITCH exam today by the smallest of…
-
Free Cisco webcast of a CCNP TSHOOT HSRP scenario
I received this in an email from CiscoPress/Cisco and thought others might be interested. [url=http://promo.pearsonitcertification.com/pages/start/plp-webcast-home/index.html?Campaign_Id=262&Activity_Id=204&link=text&WT.mc_id=2010_Aug_24_CP_PBM_CCNP_TSHOOT ]Cisco CCNP TSHOOT: Troubleshooting HSRP[/url] Tuesday, August 31,…
-
QoS policing/shaping
Fellow TE'ers, I have a 2811 router which has a 10Mbps connection to the net. I also have 3 customers which connect into the router and I would like to: * ensure that each customer gets a minimum bandwidth of 3Mbps * reserve 1Mbps of bandwidth which is not available to any of the customers * allow each customer to use any…
-
Passed QoS
Well I passed the 642-642. Overall the test was pretty easy. The sims tested your knowledge but weren't bad at all. I used Odom's book for study, and spent about 2 months studying. I'm not sure why QoS gets such a bad wrap. After going through Odom's book I found out that QoS is pretty awesome. I'm sure rolling out an end…
-
Cisco Catalyst 3560-8PC
Would this be good with a 3550 as well. I am wondering will this switch let me cover all the topics on the CCNP Switch test?
-
Prunning
So I am looking to clean up our network and I noticed VTP prunning. I can't think of any reason why we wouldn't have this turned on. Anyone know of a situation that would cause you NOT to turn this on?
-
Unified Communications Manager 6.0
Hey Guys, Trying to study for CIPT1. (642-446) I have a server and I want to install CUCM 6. Apart from Cisco does anybody know where I could obtain a copy ? :D Thanks
-
Passed QoS
-
TSHOOT Journey
Just got back from Cisco Live. It was wonderful as usual. I took the TSHOOT there and failed miserably. I believe my test bugged out on me because when I went back to a question where the problem was between routerA and routerB, the client could no longer ping the default gateway. I was dumb founded, and looking over the…
-
MPF brainteaser
So I was talking to my co-worker yesterday about how proficient I think I am now configuring and troubleshooting ACE modules... that I can set up a context in minutes, from rservers and serverfarms to class-maps / policy-maps and service-policies. My co-worker, always ready to challenge everything I say (oh, she's a woman,…
-
CUE Question
I have a CUE (NM) running 3.1.1 -- wondering if, when administering it in the web browser, it automatically writes the config to persistant storage after we're done. Seems like we recently lost some config after a reboot, and we're wondering if its a device issue or if we need to be doing something more when using http for…
-
Policy route map
Hey I have a problem first. Okay many of our client software applications here are using a certain ip address say 192.168.1.99 all of them are pointing this this ip. However we have a DRC backup test we are going to perform soon. which means I have to change the IP address on 100 plus PCs on the fly. NOT! I have my own…
-
Any CiscoWorks gurus in the house?
We recently upgraded our content switches to ACE blades in our 6500 chassis's's's (what's the plural of chassis anyway?)... a really cool product, by the way. Had to get a handle on the MFP in a hurry... nothing but class maps and policy maps. Anyway, I digress. We use CiscoWorks to backup configs of all our cisco gear. I…
-
Private vlans
I been playing around with the private vlans functions and it seems that under the interfac settings #switchport private-vlan ... you have multiply ways to achieve the same thing. It seems that #swithport host-association ... is the same as #switchport association host as is 'switchport private-vlan mapping and switchport…
-
Number of ports on a 3550
Hi all! First post over in the NP forums. I'm slowly working on my CCNP Switch book; I've kindof stopped until I get a 3550 or two since I've reached a point where I really need to lab to understand what I'm reading. Anyways; I thought I had read in one of the posts here that you really want to try getting a 48-port model…
-
Need help with your lab?
Hi, If you are studying for your CCNA Security, CCSP or CCIE Security lab and need someone to show you how to configure anything relating to ASAs or router security, please contact me. I can setup an interactive remote presentation\lab session for you and we can walk through any issues you are having. For a 15 minute…
-
How do you guys document your large ASA configs?
The question says it all. How do you guys manage config remarks? One of the biggest issues with firewall configuration management is understanding what rules do and why they do them. I’ve always used the remark option on ACLs but that generally requires countless hours of command entry if the firewall is established with…
-
Cisco PIX 506
Hello, I am thinking of purchasing a Pix 506, Will this be enough to get through the CCSP with? or will there be more hardware? I already have a large amount of routers and switches.
-
Will this equipment work for my lab?
Hi everyone im studying for the CCNA right now and want to buy a lab that will also work for harder certs. Will this work? MODERATED
-
CCNPs
Greetings my CCNP legion: Quick question. For those of you with the CCXP: How long did it take you to get it? How much money did it add to your salary? How long did it take you to get a "CCXP level job"? How long did it take you to feel like you were a CCNP in practice (not just in paper)? Thanks, Black Router
-
TSHOOT Passed....CCNP Passed!
So, I took the TSHOOT today, and passed, with 931/1000. I knew all along this would be my exam, I'm a troubleshooter by nature :D Given I'd already passed the BSCI and BCMSN, that means I'm done with the CCNP! In terms of materials I used for the exam? Nothing but the topology and BSCI and BCMSN knowledge. I built the…
-
3550 Power cord
Hello, This might be a newbie question for someone who has never touched real equipment, but I have recently purchased a few 3550s on ebay that come without power cords. I've looked it up for Canada/North America, and it states we need the CAB-AC power cords using Nema 5-15P connector. Looking at pictures, it justs looks…
-
CCNP Switch - Lab Companion
Hey Guys, is there a lab portfolio that you recommend for CCNP Switch? Thanks!
-
ccnp interview tomorrow, need help
hello all, i have an interview tomorrow i would like to ask some questions q1) when to use hsrp, vrrp and glbp ? i know their configuration, all commands, but what if someone asks that when is it best to use hsrp, vrrp and glbp. vrrp is open standard so it can be used when there are different vendor router/mls.. hsrp is…
-
Packet Tracer ok for CCNP SWITCH ... ???
I'm looking at packet tracer 5.3 and I see they have 2960 and 3560 switches. Anyone know what packet tracer can't do for the CCNP SWITCH?
-
VPCS - Virtual PC to ping etc. on GNS3
Hey guys I configured VPCS to work alongside GNS3 as my hosts to ping etc. etc. you get the gist, and just wanted to share this thing are beautiful, except I keep getting "206-unable to create UDP NIO" I figured the rport and lport configuration in the cloud has to be the otherway around. Thought to share this stuff to…