-
Are there troubleshooting sims on the ccent or is it all just configuring things?
I've been practicing in packet tracer but I don't have any troubleshooting labs to practice with.
-
Designated vs. Blocking Port decision
So I've been studying STP more and more trying to get a better understanding of how it will behave under certain circumstances. I understand Root bridge decision, and root port decision, but when it comes to knowing why one port will be chosen as a designated port vs. Blocking leaves me a little confused. I'll use this as…
-
CCENT Subnetting on test
Hi Everybody, I understand that there is 50 (or 60?) questions on the CCENT test. How many are subnetting questions, the in your head math type? Thanks
-
Error while trying to install Cucm 8.6
I have come across a problem while trying to install CUCM 8.6. I am installing the cucm server in VMware on my computer and the message below shows up Network Boot from AMD AM79C970A Client MAC ADD: 00 0C 29 …………… PXE-E53: No boot filename received PXE-M0F: Exiting Intel PXE ROM Operating System not found I have…
-
Passed ICND1/CCENT
Long time reader, first time poster :) . I wanted to share some of my experience with the CCENT exam as I was able to pass today with an 899. I used the following materials to prepare: Wendell Odom's Official Cert Guide (Primary book) Todd Lammle's CCENT Guide (Secondary book to fill in the gaps) Boson Practice Exams…
-
Appearing for Composite CCNA after passing ICND1
Hi all, I have my CCNA exam scheduled this saturday and this is going to be my first attempt. I fear I am going to pass this exam ~(inspite of putting hours studying the materials. Just wanted to know If I can sit for CCNA composite after passing ICND1 exam? I am thinking of sceduling ICND1 next saturday and then take a…
-
2621XM boot problems
Guys I am trying to boot one of my 2621XMs that my office gave me to use. This is what happens at startup and Im not sure what is wrong. If its ram or flash related or if its just old and tired where I need to replace it. Anyone have any ideas. System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1) Copyright…
-
L2 Question
Answer from an exam simulation of forwarding packets.... When a host sends a packet to another device on a different subnet, the host will place its own MAC address in the Source MAC field, its own IP address in the Source IP field, the MAC address of the Cisco Routers nearest interface in the Destination MAC field, and…
-
Osi
Hi there folks! :) I've been asked a question that goes something like this: A host PC has set his default gateway to 10.10.10.1 and when he pings his default gateway, what he gets are 4 ping packets sent and none returned saying "Request Timed Out", so it's 100% fail... At which OSI Layer is the problem? A - Data-Link B -…
-
BOSON Exam that comes with the Cisco Guide, a few Qs?
Afternoon, Planning to book the ICND1 exam end of this month in Leeds. I'm currently whizzing through all the chapters in the book and viewing the CBT Nugget videos again. For the first time I've installed the BOSON exam on my laptop and was looking at some of the questions and was I surprised at the difficulty of these…
-
It has been 2 years since I took the CCENT...
for WGU, but the icnd2 wasn't required. I put it on the back burner. Now it is time where I should get the CCNA. Since it has been so long I am rather rusty and don't work on Cisco equipment everyday. Should I take the composite exam? Or can I just push through the the 2nd part? I am just worried that I have been away from…
-
Limiting Access to Internet Router
Setup - Layer 3 switch with multiple VLANS. I want to connect a DSL router into one of the switch ports and have only certain VLAN members (call it Vlan 5) use the router for Internet access. I obviously do not want any risk of Vlan 5 being able to route to other vlans/subnets on the L3 switch. So far I've configured the…
-
command for check when was used or activated a port for the last time?
Hi everybody!! i have a question: is there any command for check when was used or activated a port for the last time? imagine that i have a catalyst with 24 ports and i want to recycle some of them because i removed some computers in my network a few months ago and i cant remember their ports number, and maybe in a some…
-
Should I buy Boson practice Exams for ICND1?
I am using Pearson Vue test pack that comes with the Cisco Press ICND1 Odom book now, was thinking Boson may prepare me better for test.
-
Packet Tracker Vs Boston Netsim which is better ?
O'k I would love to get real equipment to help me pass my CCNA but getting real equipment is not an option until late 2013 or early 2014. So I have been useing packet tracer and it's ok but eveyone on this fourm keeps talking about Bostom Netsim to pound out commands and labs. So which is better, Packet Tracker or Boston…
-
Concerns of Connecting Unmanaged Switch/Hubs to Network
Are there any issues with plugging in small switches (small 4..ish ports) into the wall ports at work to allow multiple PCs to share the connection, if for example only one wall port was available.Talking about the Belkin/Netgear etc..
-
HTTP Get Requests and Swith Frame forwarding/Filtering?
Hi Everyone, I am studying for CCENT and have a question: When a computer on a lan with multiple other hosts sends out an HTTP Get request over the internet (out past layer 3), does the requested frame come to the switch and get flooded to all hosts on the lan (accept the original port), or just the single computer that…
-
BOSON ICND1 Practice exams Qs include ICND2 Qs?
Morning, Was testing myself on some questions this morning and come across a Sim question that was very difficult and in the end i gave up. So i clicked on the 'show answer' button to see if i'm just being dumb and answer it provided was something i havent read in the book. So i looked carefully at the Question and above…
-
Whats is the best resource available to read/learn about CCent
I was looking at CCent for dumbies by Glenn Clarke.
-
Odom Practice Exams & Boson Practice Lab Simulator enough?
I am currently planning on using the Odom CD in the back of his book for practice test questions. Is this enough for the CCENT ICND1? For labbing simulations I am using the Boson Netsimulator, and thats about it. I was thinking about using Boson practice tests as well, but would like to know if the Odom practice questions…
-
Life after CCENT?
Hi Everone, This is a question for those that have passed CCENT in the last few months or year: How has CCENT changed your life? Has it opened any doors? Do you feel more confident in your work? At least some fun technical conversations? Thanks, Node
-
Site to Site calls only work one way
Hi All, What could be a possible causes of the following. Site A - Can call into Site B (Site B phones ring) Site B - Unable to call out of the site. Engaged tone Call Manager Express, latest version.
-
Cisco 3550 switch and 2691 router for $70
Is it a good deal? I know someone trying to sell these. And i have a home lab that did not go live yet. I can use it down the road, i guess? My worries about the router. I know i can do L3 routing with 3550, but is it worth for the router? Or i can get the switch alone for $40
-
Any books to self-study for 640-692 RSTECH Cert (CCT Routing and Switching)?
Does anyone know of any books out there to do a self study for Cisco's CCT Routing and Switching Certification?
-
RIPv1
-
Taking CCNA Program, take Network+ beforehand?
I plan on taking a CCNA program at a local school. The program is broken into four parts & meet M & W from 6-10 from March until October with 1 week off in between the Modules. Module 1: Networking Fundamentals (76 hrs) Module 2: Routing Protocols and Concepts (68 hrs) Module 3: LAN Switching and Wireless (36 hrs) Module…
-
Difference Between Ethernet WAN and Ethernet ports.
So i was in the process of buying a cisco router today and im looking for one to get connected to my VDSL modem, i was looking for one with an ethernet WAN port. Then i got thinking and was wondering why i actually need an ethernet WAN port why can i use just a normal LAN port? This might be a pretty novice question, but…
-
What are employers looking for?
Hi Guys. This aint really a CCNA related topic, but i think it is a good thing to sort of dicusss especially for those who have gained a CCNA and looking for a role where they can build up experience (like me!!!), As the title reads what are the employers really looking for, for someone trying to gain the experience? I…
-
What am i doing to prepare for my ICND1 exam, sufficient?
Morning, As you know when it's near the time of booking the exam nerves kick in. I just need the peace of mind that i'm doing this right so wanted to share with you my exam study preparation and wanted your thoughts. Firstly, i'm going through the Official Exam Certification Guide book (W ODOM) and CBTNugget videos for a…
-
How the equal cost route behaves in terms of packet sequence?
I read both EIGRP and OSPF supports this feature, which means there exists two or more routes between two networks. Then, does it mean the IP packets would reach to the destination via different paths in a round-robin way?
-
Connect to PSTN using FXO port
Hi guys, Is anyone able to help me with the config to set up an FXO port to connect to the PSTN? I just want to plug my home phone line into the Cisco router to try call connect to the PSTN. I'm ok setting up the dial peers, just want to know if there is any special config needed for the FXO port itself. Cheers
-
Configuring a T1/E1 CSS Interface
Reading through the above in the Cisco Press book and it states the following... "After you enter the pri-group command, the router creates 24 ISDN voice ports that it will use for incoming and outgoing voice calls. This is verified with the show voice port summary command. Notice that the voice port is labeled with the…
-
CCNA Lab
Hey guys, I've finally got myself into the mindset to get my CCNA under my belt. I've actually gone and brought the in60days books and signed up as a member of the site as I'm 100% committed to passing my CCNA now, I've put all excuses in the cupboard until I pass this cert! I've spent most of the afternoon looking at kit,…
-
Faster subnetting? Tips/Advice/Tricks wanted.
Hi Everyone, Ive been studying for CCENT for about 2 months now. I understood that subnetting is the biggest and toughest part of the CCENT exam, so i hit the subnetting topic real hard. I feel that I have mastered the subject as I nearly always get the right answer. However I am very slow. And I use excel to help reach my…
-
Got some questions I'm not sure and need help?
But first of all Is it allowed to post **** questions on these forums to ask help? If it is I have several questions on 640-554 I'm a bit confused about. Please engliht me about whether I can post them here or not.
-
Question of the moment:
There's two hosts (Windows 7 and Ubuntu) connected to Switch 1. Windows 7 is connected to Port 1; Ubuntu, Port 3. Windows wants to send a packet to Ubuntu... MAC Addresses: W7 = 00:00:00:00:00:01 Linux = 00:00:00:00:00:02 The switch was turned off while you connected the machines to the ports. What does the Switch do with…
-
I need help
Hello I need help to solve this question with the writing of the step-by-step solution ََQ/what valid host range is the ip address 172.26.7.20/23 a part of? Q/what valid host range is the ip address 192.168.125.85 ;255.255.255.192 a part of? Q/what is the first valid host on the subnetwork that the node 192.168.30.137/28…
-
CCNA Kit
What do you guys think of this kit to build a CCNA lab? CertificationKits
-
Help with LAB
Hi everyone, I am not sure how this works but I am a newbie to this cisco thingy. I'm currently studying for my CCNA with some INE Video tutorials online and I am done with the OSI Model. I'm on the Routing whatever whatever now and I am not sure how this whole thing works, I just downloaded putty now and I need access to…
-
Is it possible to take CCENT even though you have an unexpired CCNA Cert?
Is it possible to take CCENT even though you have an unexpired CCNA Cert? (Then take CCNA to recert?) Thanks.
-
Router Boot Rom upgrade
Has anyone every bought the cheap Bootstrap Rom upgrade from the guys in HongKong? Are they reliable. 10 bucks for a chip vs 50 for someone here int he states makes me wonder if its Legit. Im looking for 2621xm 256MB/8r chips.
-
ccna voice lab manual rough cuts
My question: rough cuts is avaible now($28.00) and the normal ciscopress ecopy avaible 1/16/2013($27.19) Book sometime later($40.00). Has anyone used rough cuts, looks like it was updated in November. My worry is its not complete and might be a waste of time and money.
-
Passed CCENT 950
Passed this morning with a 950. I used Todd Lammle's 7th edition CCNA book. I also used packet tracer and GNS workbench to lab. I was ready to take the exam in the beginning of December but coworkers tried to convince me to take the unified exam. I slacked off due to the holidays and wanted to get an exam done before my…
-
Most common CCENT related CLI commands?
Hi Everyone, What do you think are the most common Cisco Switch&Router CLI commands used on the ccent exam and in the work place? Thanks!
-
Packet Tracer?
Where do i find this program? Its confusing. I am a member of the Learning Network webpage but cant find the download. Is it only available to 'students' who take a classroom lesson?
-
Standard "My ICND1 is scheduled for tomorrow" post...
Tomorrow at 1pm. First IT cert in about 4 years as I took a hiatus from the field and am looking to get back in and networking in general has sparked my interest as something I'd like to do. About 3.5 weeks of study with CBT, TrainSignal, Transcender and some of the CCNA study guide. Homelab + Packetracer and BosonNetsim…
-
640-544 Books
Most people are posting books in regards to the old exam. What is the best book for 640-544. Is it the cert guide below? Thank you CCNA Security 640-554 Official Cert Guide (Official Certificate Guide): Keith Barker,Scott Morris: 9781587204463: Amazon.com: Books
-
Cisco Network Simulator VS GNS3
Hi Everybody, What is your opinion on the Cisco Network Simulator? Is it worth while to buy the expansion labs? How about GNS3? Is GNS3 better than Cisco Network Simulator? Thanks,
-
Subnet zero concept confusion
The more i read about subnet zero more I am confused though I can solve subnetting problems easily.I think the concept is not clear to me as to why we consider it and the need to include it when we can do without it.Can anyone explian in a layman's language. Thanks in advance.
-
CCENT or CCNA
I am planning on completing my CCNA by Jan 31st, but I wanted to what what everyone thought of taking either CCNA as 1 test or 2 test. I've heard that the CCNA can be diffucult because its so broad, and I was wondering if the CCENT is more focused. Just trying to get an idea before I purchase a voucher and scheudule my…
-
Using Local Logon if TACACs server fails
If I setup a new AAA model to use an external server integrated with AD, how easy is it to configure the router to also try locally stored logon if this server fails/unavailable?
-
No rollover cable in Packet Tracer 5.3.3
Hello there , i am preparing for CCNA exam and I am using packet tracer to practice some labs so the problem is that there is no rollover cable but the console cable.Now, i want to know if the rollover cable same is same to the console cable?. Thank yall in advance.
-
ACS AD authentication
I'm looking to configure a bunch of routers to use an ACS server which is integrated with AD for user access. That part is fine. I have one certain router that i only want one person to have access to via ACS TACACs authentication. All other routers, I have another group of people who I want to give access to via same…
-
Subnettingquestions.com ?
Hi Everyone, I am addicted to subnettingquestions.com. Is this a worthwhile and beneficial study aid? subnettingquestions.com - Free Subnetting Questions and Answers Randomly Generated Online Thanks,
-
Vlan on Switch vs Router?
Hi Everyone, Can vlan's be set up on routers or just switches? Also, please correct me if i am wrong, that vlans depend on on subnets created in a router, so a router *must* be subnetted before a switch can be split into vlans? Thanks, Node
-
Just sat my CCNA exam for the first time and failed
Just want to share really. To prepare for the exam I used, Cisco Press / Boson test engine, Exam cram with Measure Up and Todd Lemmle. My advice to myself and anyone is to do as many Simulations as you can.
-
Why EIGRP mixes unicast and multicast in RTP?
Would it be more efficient and straight forward to use unicast only?
-
Cisco 837 on VDSL fibre connection
Hi guys kind of need a quick response to this one looking to buy i cisco 837? Does anyone know if it will work on a Fibre connection have been searching on google for ages but cant really find anything?? there are worries about it working on ADSL2+ so not 100% it will but just wondering if anyones online now and knows??…
-
Passed ICND2 with 902
I'm happy to report that yesterday (Dec 31st) I took and passed ICND2 with a score of 902. Study materials used include CCNA ICND Exam Certification Guide by Wendel Odom, TestOut Labsim CCNA course, and CBT Nuggets videos. Of all three, I used TestOut the most. Prep time was 3 months. (This is after having passed ICND1 of…
-
Super Stuck Advice needed please
Hey Guys, Let me start by wishing you all a happy new year . Well i was wondering if you guys could give me some advice. I work in a tech support role for an ISP, ADSL based role. My ideal job is to land a Network Engineer Role, work in a NOC/NI position. Now all last year i studied for the CCNA and passed in November, I…
-
CCNA Expiry / Structure query
Hi there, I to date have only passed CCNA semesters 1 & 2 My questions are; 1. Do these qualifications expire and if so after how long? () 2. Do you actually need these to obtain the CCNA? ie do you have to pass semsters 1, 2, 3 & 4 then a big exam? I'm really unsure of the structure. Thanks in advance for your help.
-
Looking for advice.
Guys I know there are a million threads on labs and buying equipment. Well here is another one. Me and another guy at work want to start studying for the ccna. I have 5 2610xms that were taken out of branch offices but there are no extra modules. I have several 2950 and a couple of 2960 and even a 3760. I also just got a…
-
UC540 wirless setup
Hello, I have a UC540 here for a client and am having trouble setting up the Wireless on this router. The status and protocol are both up but am still not able to connect. Anyone ever done this before? Thanks in advance
-
CCNA with video training
Hello guys, I need a few opinions from people who have done the one-track for CCNA and who have used either CBTNuggets or TrainSignal to help them along. I have both video series, along with Odom's books. I'm renewing my CCNA, it expired in late 2010, and I'm more trying to refresh the technologies, theories and the added…
-
More IPSec Tunnel help needed
Ok.. I had posted a thread last week sometime about configuring an IPSec tunnel and we ended up having Cisco chime in to verify our end of the IPSec tunnel which was good. It was the other end that needed to make some changes before the tunnel came up. My question now is about the following command line: crypto ipsec…
-
VLAN RANGE ID'S and Native VLAN assistance please.
Team I am re-typing my VLAN and VTP notes and I want to confirm a few things VTP ( VLAN Trunking Protocol ) can only learn normal ranges VLAN ID 1-1005. VTP does not learn extended range VLAN ID 1006 thru 4096. In addition VLAN 1 and Native VLAN mean the same thing or am I wrong here ? Please advise
-
Can I use my pc as tftp server to install CME
Here the issue, Setting up a CME lab at work were I'm not allowed to connect to their lan to this router. I have CME-full-4.1.0.2.tar from a USB drive on my pc. I don't have access to a TFTP server to install this. thoughts I'm sure its easy and I'm missing it. I loaded my ios using xmodem only have console port access.
-
Vlsm
hey guys. i been studying ccna for about a month now and i have had no problem understanding stuff(i work in the field kind of). i have pretty much grasped everything quickly. the other day i had some subnetting questions but quickly mastered subnetting. however im on the VLSM part and man i cant get my head around that at…
-
Files from tftp server
Reading through the cisco ccna voice book, not long started it. With regards to the IP phone boot process, when the phone downloads the initial configuration file from the tftp server (cnf.xml), are these the files we download from the Cisco site and then transfer to the tftp server? Just that the book states the filenames…
-
Hard to Retain?
I have a hard time retaining everything that I have learn from studying CCNA. I have looked at threads & websites to help motivate myself. And also I don't want to take the test repeatedly like I did with Security+. Took me 3 times to fail it (575, 670, 720 *I cried for 2 days on that test lol failed by 30 points*) , and…
-
Newbie ?: possible to use Cisco 1700 router to connect to Time Warner?
So I'm building my CCNA home lab. I got a Cisco 1700 router. It has a T1DSU/CSU Wic. For fun, is it possible to use this router to plug into my cable modem Motorola Surfboard SB5101U so that my CCNA lab would gain Time Warner Internet Access? Would I need extra hardware? If Cisco 1700 isn't supposed to be used like this,…
-
From zero to CCENT?
Hi Everyone, What is a fair, or average time to go from no cisco experience to passing the CCENT? I planned on two months, but with one month left i am beginning to wonder. I feel i understand all the subject matter, but memorizing it is a bit much. (so far)
-
Passed ICND 2 Today! - 2nd try
Passed with an 860. After failing last week with an 805, I must say the boost of motivation I got definitely helped push me through the long hours of hitting the books and labs this past week. I guess now I'll take a break the rest of the week while contemplating whether I'll start ccna: security or mcsa.
-
Passed ICND 2.
Took and passed the ICND 2 with a score of 916 yesterday. Was planning on taking the test in October but something came up at work, then I had a 4 week vacation. Didn't even touch anything Cisco during it. When I cam back, I was lazy and just put it off. Started studying again the weekend before Christmas so I can get it…
-
Anyone tried cbt nuggets for the CCNA:Securit?
If so how would you rate them?
-
Network Range confusion
Hey guys, I am practicing subnetting and looking at two separate network ranges. Really confused on what IP addresses to assign in the middle of these ranges, if you could please enlighten me. Also if any tips to lessen my confusion? Example 1: 150.5.0.0 - 150.5.1.255 Example 2: 150.5.2.0 - 150.5.3.255 Ok Class B address.…
-
confused about subnets
i mostly get the subnetting part. however i have some confusions when finiding out subnets. for example this question was on one of my pre tests and although the videos tell me to use (2^n)-2, the tests indicate that they are using just 2^N. what i dont get is why? YOu have been assigned an ip address of 135.65.0.0 and…
-
Just signed up for Security+, CCENT, CCNA, and CCNA: Security
Student at WGU here, and my wife thinks I'm over my head. I have six months to complete four certs. Wish me luck.
-
Public or Private Address Space
Hi All, Just to make sure I'm not going mad here.... An address beginning 192.115.x.x, 192.114.x.x or even 192.111.x.x is a public IP or IP routable on the Internet? Private Address (Class C) are always 192.168.0.0 - 192.168.255.255
-
passed!!!
ccent done!! Ccna here I come!
-
Resolving an svi gateway address using arp
Guys I need help with this grey-area. I'm thinking... If an IP packet is to be routed from one VLAN to another using SVIs on a Layer 3 switch as default gateways, how does ARP work?
-
Passed ICND2
I passed my ICND2 exam just before Christmas I ended spending a bit too much time on one of the sim's but I found it a little easier than the ICND1 exam for some reason. I think I am going to give the CCNA Security a go next as network security is a route I would like to go down. I used; - CBT Nuggets which was brilliant,…
-
Yes!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Passed the ICND2 today. 860/1000. I am really stoked, what a great Xmas gift! Onto CCNA Voice now. Cheers!
-
Introduction
Hi TechExams, Just a brief introduction of myself. I am new here and have been studying for the CCENT for about a month now. I am a middle age and changing careers. I have about 2 years experience now in residential voip provisioning. By listening to other people I have found that a cisco cert seems like a solid…
-
Query regarding ccna book edition and exam change
Hi all, I am new to this forum and read all threads posted in lasted 3 months but couldn't find answer to the question i was looking for. I am planning to buy a CCNA study guide(sybex) by Todd Lammle so, 1 --> Is there any 8th edition which will be releasing soon or should i go with 7th edition? 2 --> I am planning to give…
-
I have 3 1721's and no good IOS....
Sooo. I have gotten through most of the introductory reading as far as getting ready to start learning about cisco. You know, mastering the OSI model, learning to subnet in my sleep, etc....now it has come time to start playing with IOS! unfortunately the routers that I bought on Ebay have versions of the IOS that…
-
Need some CCNA Testing Advice
Well, I have been studying for my CCNA for off and on for nearly a year now. I have a lot going on in my life and it's been difficult, but I have stuck with it. I have have logged what feels like countless hours reading, reviewing, and doing labs. I have also taken Boson practice exams (The last two of which I passed). I…
-
ACL vs Routing Protocols
Hi there fellows! I'm studying for my CCNA and I just finished the ACLs and I thought to experiment and what I came up with is to create an extended ACL that will deny Rip (port 520) from sending updates to a router on the far end of the link, the IPs are point-to-point 10.0.0.0/30 and what I want to do is: Router 1 =…
-
14 days to go for my CCNA!
I just calculated the number of days I have for my preparations..My exam is scheduled on the 12th of Jan.This time I won't reschedule it.Suggestions welcome from all on how I should utilize the little time I have. I dont want to reschedule it and WANT to pass it at any cost !!!!!
-
Becoming good at Cisco without a lab?
I'm completely new to IT, but a fast learner with technology. I was under the impression I could study hard and get the certificates but then I see the lab threads, looked up the prices of some of the stuff and well..I won't be able to afford that type of stuff. Is a lab like that a must for someone who later wants to work…
-
Viewing Advertised Routes
I may be overlooking this totally, but what's the best way to check what routes a router is actually advertising? If I do a show ip route to view the routing table I can see directly connected routes, but does this mean they are actually being advertised from the router? Thanks
-
Passed my CCENT Today!
Hey everyone, I resat my exam today and hit a home run. 912! A much higher score then I was expecting! I read the Sybex book, re-watched some of the CBT Nuggets from my weak areas from the test my first go around and also used Youtube to help gain a bit more information. Thanks everyone for the kind words and helping me…
-
noob with book questions
i have been at this for about a month, studying for ccent and eventually the ccna. no IT background. bought the groupon deal from it university and just finished the ccent section yesterday. bought a book by walker on ebay today, waiting for that and had a few questions about other books. i see a lot of people recommending…
-
passed 640-554!
last time: I got a 763 Common Security threats: 75% Security and Cisco Routers: 100% AAA on Cisco Devices: 80% IOS ACL's: 56% Secure Network Management and Routing: 80% Common Layer 2 Attacks: 83% Cisco Firewall Technologies: 69% Cisco IPS: 40% VPN Technologies: 55% this time, I got an 835 Common Security threats: 75%…
-
IPSec Tunnel not working.. please help
Not sure if this is the right forum to post this in but it is Cisco and I'm using a 2911 ISR for this so maybe it is. I've been fighting back & forth with a company trying to establish an IPSec tunnel to allows us to move to the next step and I keep telling them we have followed their every direction in configuring our end…
-
Subnetting IPv4 Address
Pardon the dust. This is a work in progress, I just don't feel like loosing the progress! My signature will say the last time it's been updated. When completed, this part will disappear. Poof! Subnetting. We love to hate it. You're given a number and you're expected to do it right and do it quick. Seeing as there's over…
-
which router and/or l2-l3 switch series for each layer?
Considering access, distribution and core layer model, which devices would you give an example for each layer?
-
ICND2 Passed -- CCNA Certified
Hi All, Passed my ICND1 around the end of August with a 950. Finally got confident enough to take the ICND2 today. Scored a 972. I used the CBT Nuggets videos, Wendell Odom 3rd Edition, Todd Lammle book, and the network simulator/practice tests from cisco network store(WGU provided). Few of the test questions didn't make…
-
choice of IP phones ?
Hello, is there much advantage in getting 6 button 7960 phones rather than 4 button 7940 phones for CCNA voice ? Thanks.
-
frame relay doesnt work
Hi Experts Could anybody please help me to find it out why R0's serial 0/3/0 can not ping R1's serial 0/3/0 through frame relay? I have configured frame relay between serial ports of R0 and R1 and I dont see any problems in it. .pkt file is attached. Thanks in advance. [URL]http://[/URL]SmallFiles - Free File Hosting BR//O.