-
Ccent passed!!!
I passed the icnd1 today with a score of 912! The exam was easier than i expected. I finished with about 30 mins to spare. I used the cisco press book, Lammle's book, the resources on this site and i also purchased a switch and router to practice on. Thanks TE!
-
Is this switch good for CCNA lab?
Buy.com - Cisco SR224 24-Port 10/100 Unmanaged Switch, Refurbished I just came across it this morning... BTW, any criteria for choosing a switch for CCNA lab?
-
Cisco UCCE
I'm looking at taking a UCCE course, and checking out the course specifics, it requires some knowledge of SQL, I have next to none! Has anyone taken this course and found that it relies heavily on SQL? Thanks!
-
When do you know you are ready?
Back ground: Orginal CCNA expired in 2003 .. Need to re-cert for the years out.. Been working in networking for 10 years, although what you do in a day to day career is nothing like the questions on the CCNA.. That said, I've been studying with the Kaplan Self Study CD and pretty much acing it now. Also started using the…
-
Help with DHCP and VLAN
Hey Guys! I need some serious help here. I'm not that good at programming cisco equipment but I still needs to get this to work. At www.fuzzi.dk/DHCP.jpg you'ææ be able to see my setup. What I need is a complete configuration for every unit (Router0, Router1, Switch) and so on to make sure I can make it on my own, by…
-
Is the "?" command disabled on the real-test?
I remember hearing this somewhere and just took it at face value, is it true that the "?" command is disabled on the CLI sims on the real test?
-
Newbie question: do I even need a switch if I just want to pass CCNA?
I read a blog. It looks like 2 old 2500 Cisco routers are enough for hands-on practice if you just want to get CCNA. Is it true? Cisco Cert Zone: Building a CCNA lab, Part 1 Thanks in advance,
-
CCENT = me
Just passed the CCENT. got an 837, needing 804 to pass.... for having no lab it was pretty good... I re-read the Sybex Review Guide for Network+, Todd Lammle's Sybex CCENT book, Exam Cram CCENT, and I bought The Bryan Advantage study guide. I used the TE router sim, and last night around 11pm I tried to mess around with…
-
CCENT 640-822 ICND1 Exam
Is the CBT Nuggets enough? For those of you familiar with CBT nuggets, I have built my own lab identical to Jeremy's with 3 routers and 2 switches. I am able to route and ping all over the lab networks. I got Nat working and the lab is "operational". I am very familiar with IOS, OSI model, subnetting, security, etc. Is…
-
Speed and Throughput
'In an enterprise, high availability, speed and throughput of the network are critical.' What is the difference between speed and throughput in the context above?
-
ICND2 in 7 hours
My ICND2 test is at 4pm today. I received my CCENT in May, and I've been studying for ICDN2 for the past 2 months in addition to attending a Global Knowledge bootcamp. I was feeling pretty good about everything, and there hasn't been anything that I've really been struggling with. However when I woke up this morning and…
-
question about "ip nat inside" and "ip nat outside"
here is a simple basic static NAT configuration.ip nat inside source static 10.1.1.1 170.46.2.1!interface ethernet0 ip address 10.1.1.10 255.255.255.0 ip nat inside!interface Serial0 ip address 172.46.2.1 255.255.255.0 ip nat outside! So, does "ip nat inside" means the interface e0 does local->global translation, and "ip…
-
routing summarization
hi What is the difference between ip summary-address command and the auto summary command? I’m using EIGRP routing protocol, and to summarize my network it says in the ODOM ICND2 book page # 213 to use the “ip summary-address” interface subcommand, but when I use the “auto summary” router subcommand, my routing table looks…
-
Cisco Academy in the SF Bay Area (East Bay)
I'm looking to take some Cisco classes anywhere within close proximity to either my work or my home. My local community college doesn't offer any CCENT/CCNA prep but Las Positas in Pleasanton and Pittsburg Adult Education in Pittsburg offer courses for this. Do any of you guys have experience with either of these programs…
-
ICND 2 - Booked
September 30th is the date, hopefully I don't disappoint. Going over some of the longer videos by chris bryant today in regards to spanning tree, pvst, port fast, etc.. Should be fun and interesting. Just have to stay focused and get this knocked out. Wish me luck and good luck to everyone else on their upcoming tests.
-
Floating Static routes and RIP
I've been playing around with a network on Packet Tracer and have set up three routers called Boston, GB and HQ They are all directly connected to each other via serial links. Off each router is their own switch and a couple of host PCs per each LAN. Initially I setup RIP on all routers and it was working fine but then i…
-
Cable Types and Lengths
Guys, Does anyone have a method of remembering these or is it just a matter of writing it over an over again on paper for memory?
-
Cisco IDS/IPS Software - SSH
I just want to confirm something that I am having trouble locating. Once a management address and access-list are configured on a Cisco IDS sensor running v4.0 or later, no further configuration is required to SSH to the device. Is that an accurate statement? If not, could someone point me to a good read on the subject?…
-
CLI question
normally I see a space between things like "int ethernet 0" but in this CDP section Bryant has it listed as "int serial0" is that typo? or does the space only matter in certain places? or is serial0 different than serial 0?
-
ISDN objective on CCNA?
When looking under the exam objectives for WAN, they do not specifically mention ISDN. Only a Serial Line, Frame-relay and PPP. I'm wondering if ISDN is included on the test? There is a lot of crap to get down for ISDN if it is
-
Security endeavor
So i have decided to embark on the CCNA:Sec root. and as such i'm just after a bit of clarification on equipment. I have searched through the forums for this topic prior, and have changed my original idea. As i understand the majority of the exam is with ISR, so have been looking at the 1800/2800 series routers instead of…
-
Notes taking..
Out of curiosity, how many of you guys take notes while studying, what do you guys note, and how long are they? I just noticed that my notes for the EIGRP section of the CCNP Route exam is sitting at 33 pages (typed). By the time I'm done with the book, my notes will probably be around the 120-150 page range . I'm curious…
-
WIC-2T Interface
I read from the cisco website that that WIC-2T interface is used for Point-to-Point protocol or Frame Relay and Data Terminal Equipment/Data Communications Equipment. Are these the only uses for the interfaces? Are they mandatory for the 1721's if I want to lab with frame relay? Thank you!
-
Subnetting
Who ever it was that said that jeremy's method from CBT nuggets was good, wasn't lying, everything else I tried I confused me until I watched his subnetting video's! Anyone else got any success stories from Jeremy's subenetting lessons?
-
Interconnecting Cisco Networking Devices (ICND) v1.1
I have enrolled for CCNA course and they will be proving me training on Interconnecting Cisco Networking Devices Part 1 (ICND1) v1.0 Where as on cisco site,it is mentioned v1.1 Please tell me what's the difference between both of these versions means i would suffer???I have paid the fee too?? And what's this exam:640-802…
-
*TechSims* CCNA [online router sim v0.3]
It still needs a lot of work, but I present to you: the beta version of our online router simulator: www.techexams.net/testsim/techsim.php Just give it a shot and let me know what you think. please keep in mind that this is just a very preliminary version and still needs a lot of work. If you do not have a recent version…
-
Difference between WIC- t1 AND CSU -T1
*answered**
-
Questions about my home lab.
I just recently received my used 2600XM router. I am a total noobie to this so please bear with me. My current home network consists of 4 computers. 1 PC, 2 Laptops, 1 Netbook. The Laptops and Netbook are all wireless and get their signal from my ISP's CISCO DPC3825 cable modem/router. The modem also has ports built in for…
-
Has Anyone Attended Cisco Networking Academy?
I might be starting the academy this month or in January. I'm trying to get some feedback on the academy and how your experience was with the academy.
-
i5 or i7?
Hey guys... was hoping to get some input... I need to buy a new computer for everyday use. I am also planning to use it for GNS3. I am deciding between an i5 machine or an i7 for $200 more. Ideally I would like to save that $250, but I am willing to spend it if I am going to notice a major difference when using GNS3. I am…
-
Best CCNA studying materials..
I myself use Todd Lammle, CBT Nuggets, Labs (wherever I can find them), ******** and their likes to practice..I have CCNA Testout and I also have the CCNA for dummies.. But really all I use are Todd Lammle and CBT and the CLN, I see many people having so many sources..like really too many it made me feel like I'm…
-
Trying to connect to my 2600XM router to study IOS having issues.
Hey Guys, I just purchased a used 2600XM router so I can add it to my network and start using it for study purposes. The issue I am having is that I don't seem to have any serial connections on any of my 4 computers at home. Seems pretty strange but all that came with the router is a console cable with a serial connector…
-
OSPF / PacketTracer issue
Hello all. I'm having an issue with an OSPF lab I'm doing in Packet Tracer 5.3 and I'm hoping some of you can help. The simple question is I have 12 routers in my network. 1 of these routers is not updating it's ospf routing table. I added a default route to the next router and now my network is fully pingable, but this…
-
Passed ICND1 today...
Guilty!!! I'm another lurker. I just wanted to come out of the woodworks to say thanks to everybody for contributing to a really awesome forum. Its been really helpful to me in a couple of ways. The links for subnetting practice have been the best thing I've picked up here I guess... but here's my perspective on the exam:…
-
Ccna voice lab
ccna voice lab,,, i am just new to voice world now going through ccna voice book authorize self study by jeremy and cbt nuggets by jeremy also, both are awesome but the problem is without lab... For days i am searching in the internet about any advice for lab using gns3 ( or any thing but without buying any thing ) any…
-
Which Packet Tracer Version
Which Packet tracer version is the best? Think I remember someone saying the latest 5.1 is the most reliable. And the latest 5.3 has some faults. Can someone please advise me?
-
Passed the Exam Today!!!!
Just want to say that I passed my CCNA Security exam today with a score of 988/1000. I want to thank some of the folks in this forum, I have been reading some of the post and they have been very helpful. Now on to 642-637.
-
Odom's ICND2 Standard Access List Example 6-5
I may be going crazy as I keep looking at this example in the Cisco Press ICND2 book and don't understand the reasoning. Basically for standard access lists, you want to put it as close as you can to the destination address right? For this example (if I could put it into words or get the diagram on here, I would), it…
-
To Boson or not to Boson - ICND 1
OK guys, I've been studying on and off for the past few months and I'm trying to crank it into full gear to accomplish my CCNA. I have watched the ICND1 and ICND2 CBT Nuggets, read the Cisco Press books, skimmed over Todd Lammle's Book, and I'm ready to do some practice exams. I love the resources on this site and saw…
-
Completely New to CCENT/CCNA
Hi, I'm completely new to the cisco world and i'm just looking for a little advice/information on setting myself up to get the certifications. My friend has given me his lab (planned on doing his CCNA but didn't get started) and it consists of the following: Routers: 1x 2620 1x 2612 Switches: 2x2900XL My question is when I…
-
Booked my CCENT exam
Hi, I've finally gone and done it! and that is booked my ICND1 exam for next week. I've covered a lot of the main areas in detail such as subnetting, switching and routing concepts, routing protocols. I've praticed setting up networks in using 4 routers, 4 switches, IP hosts as well as dns servers and dhcp from the router.…
-
Cisco Vouchers in the UK
Hi, Has anyone used vouchers in the UK to puchase discounted exams ? Where you get these from ? regards Damien2008
-
SSH and Login Block For
I am taking the CCNA Security course through the Cisco Networking Academy. I am doing the chapter 2 lab. The lab had me set the login block-for command. Then it went into setting up SSH. I am now getting to the point where it is having me set the ip SSH authentication retries. My thinking was that I already did that with…
-
Routers / Topolgies / WICs - please help
Ok, I have gone through countless threads and links that people have posted and I am now even more confused about what I should be getting. Not knowing my way around the routing world (yet) , I am not sure exactly what my needs are. So jumping on some deals with the little knowledge I have , I grabbed 3x 2950's and one…
-
Serial question
So, I am trying to get my lab going. I have a small issue / question. I have a couple 1760's and 2611xm. I have a variety of WIC 1T's and 8 port serial cards, etc. I have DCE to DTE serial cables. I plug said serial cables into the WIC cards, and after configuring the interfaces and ensuring they are not shut down, etc, it…
-
RIP, EIGRP, and OSPF on same router
hi I have on one router 3 different LANs, and each of them different routing protocols, one RIP, second EIGRP, and the third OSPF, is it possible it should advertise all 3 LANs, or will it use only EIGRP with AD 90????
-
Subnetting question
I was given a subnetting question which was 49.210.83.249/29(ip of host) and worked out that the subnet this is on is 49.210.83.248 with a broadcast address of 49.210.83.255. I then thought i'd extrapolate on the question and try to calculate the next subnet after this, along with its associated broadcast and range. I…
-
Wgu / brv1 & bsv1
so, I'm taking BRV1 and then BSV1 through WGU. The only "book" that I can find in the COS is a PDF review manual from ucertify.com. Is this for real? there isn't an actual book or ebook for this class? If thils is the case, what book do you guys recommend? Of is the PDF review manual and the other stuff in ucertify enough…
-
GNS3 question_1
I don't know whether I can explain or not. I have created a lab in the GNS3 and was trying to connect GNS3 with VMWARE(installed Ubuntu) and trying to introduce real network Traffic in the GNS3. these thing made my laptop red hot and to counter this i came up with a idea to use orignal machine of linux OS and connect this…
-
Routing table question?
Hey guys, I've been doing a combination of reading and test-taking in preparation for the CCNA, and I ran across this: Could somebody tell me why the answer was 10.1.3.3? And possibly an explanation? Thanks in advance
-
CCNA Home Lab vs Training
I've been thinking of getting into networking and I saw that a local community college offers a CCNA training course: Tri-C course search results http://www.tri-c.edu/NonCreditcourse.aspx?SubjectCode=ZCIS&Subject=ZCIS&CourseNumber=1000&Term=201180 The course meets up twice a week for 3.5 hours a day and is $1050. This is…
-
Cisco Academy
Hi, I'll been reading Todd's book and decided to enrole myself in a course. The course is built up on 4 semesters. I've also purchased the official Cisco Press Books for the CCNA. Does anyone know which chapters tie up with the semesters and if the final exam of the cisco academy is different from the non cisco academy…
-
subnetting problem CCNA
Hello, I cannot seem to figure out an answer for this scenario within the CCNA course: Routing Protocols and Concepts My question is about Activity 3.5.4: Subnetting Scenario 3 Here is the scenario PDF: lab354.pdf Scenario: In this lab, you have been given the network address 192.168.1.0 /24 to subnet and provide the IP…
-
Has anyone ever used a SGE2000?
SGE2000 is a 24 port 10/100/1000 Linksys branded Cisco Switch. Just curious if anyone has ever used one and if they had any issues with it. Mine keeps wanting to turn on STP. And, that in turns causes the switch to go offline. Might remember my post about the home router. Well, it wasn't the router or the internet. Found…
-
Why I'm seeing a 60KB frame? Does it violate 1,500 MTU rule?
I use wireshark to analyze the raw network packets captured. I see certain frames carry big TCP packets as big as 60KB, and thus those frames are bigger than 60KB. I remember MTU on ethernet layer is 1500B. Is this expected? In the same file, it looks like frames carrying UDP packets usually are smaller than 1500B.
-
Need explaination on this switch command pls
I'm trying to assign IP address 192.168.1.3 to VLAN 1 on a switch and I'm getting this error. (This is using Packet Tracer) Switch1(config-if)#ip address 192.168.1.3 255.225.255.0 Bad mask 0xFFE1FF00 for address 192.168.1.3
-
Cisco store?
when you get your MCP you get to go to the super secret store that never has anything availabe.... is there such a store for Cisco? that maybe does have things available?
-
CBT Nuggets
I bit the bullet and shelled out the money for the videos, is it worth it?
-
about DR election and flooding LSA packets in OSPF?
Hey guyz i forgot something very important about single-area OSPF. After establishing adjacency with directly connected routers by sending and receiving hello packets with required same values such as area ID, LSA packets are exchanged between adjacent routers. However,then, additionally DR is elected in order to flood…
-
ICDN1 Done!
Hello My first post on these forums, but since they have been so helpful to me for passing the ICND1 exam I thought i'd share my experiance! I passed today with a score of 962/1000, much better than I thought I would do. My study plan basically consisted of the following - Fully read Odoms book - Purchased a 2950 switch…
-
Router to start
Hello Guys!! Last semester I took the class Network Fundamentals (CCNA Exploration Companion Guide), and now I'm taking Routing Protocols and Concepts (CCNA Exploration Companion Guide). There are several labs in those books using Packet Tracer, and I'm thinking about buy some router to do real practice at home. What do…
-
How much subnetting is there in the new ICND1?
I see that Cisco says they have move to a more "knowledge based" testing? Meaning much more simulations compared to multiple choice, I was wondering if they still have a strong emphasis on subnetting or if that has been reduced.
-
CCENT Study
Hey All. Long time lurker, first time poster :) I've been studying half heartedly for my CCNET qualification for over a year now but I've finally got myself booked in for the 30th August. I went through a stage last year of studying for this but spare time was hard to come by to do this as I work full time and only have 2…
-
router's using datalink or serial protocols?
I've read a few sources such as dummies guide to CCENT, Trainsignal and cbt nuggets vids as well as the Cisco ICND1 book but they seem to disagree on something. I have no way of testing this to verify it as I dont have a way of analysing the protocol encapsulation between two routers. The majority of souces i've read and…
-
Ha It finally happened - kinda long
.......
-
From Todd Lammle - New Cisco Certs...
Check out my latest Video update on the newest Cisco Certifications announced this week: http://www.youtube.com/watch?v=BbmbWfN5oQk Cheers! Todd Lammle
-
CCENT Exam
Hi All, Just finished by ICND1 course recently and im now going through CBT Nuggets videos (Jeremy Cioara) to help me prepare for my exam. I have pretty much got Subnetting down to perfection and I practice a lot using subnettingquestions.com - Free Subnetting Questions and Answers Randomly Generated Online which has been…
-
TCP error detection and recovery question?
just to make sure i got it right? When host A is sending data segments using TCP to host B at the transport layer, and they all go through such as 100, 200, 300, 400 with 200 failing to go thru, how does host B know that 200 didn’t go thru? Is it because the sequence order for them all is embedded in the header of the very…
-
Urgent helps needed
I'm setting up a lab for a school. I recently got a 2960 48 port switch from another department. I'm trying hook up all the computers in the lab to it but for some reasons it couldn't get an IP address. I've checked the switch and there's not port security running on it. Someone please help me troubleshoot this. Thanks
-
CCNA Lab Feedback.
I am new to the forum and after doing research the last couple weeks (this forum was invaluable in that research, thanks!), I went ahead and purchased equipment for a CCNA Lab and would appreciate your feedback. Routers: 3x 1721(128/32)12.4 1x 2621XM (128/32)12.4 1x 2611 Access server Switches: 3x2950 WIC: 3x WIC 2T 3x T1…
-
CCNA-S value
Besides knowing the information, has anyone seen where the CCNA-S helped them get the next decent job? First, let me say I know just getting a cert is going to have people knocking down your door for you to come work for them. I usually search the job boards and see if companies are looking for a certain cert. What HR is…
-
Well Crap Failed ICND2
I took the last part of the 2 test process today and failed with a score of 682 of 825. The first test ICND1 was hard but I scored 878 or 802. I think I took this one a little for granted I studied hard for the last month but I think I needed another month to practice. My test was a lot of sub-netting and ACL's. I had an…
-
Cisco 871w
I am trying to setup my 871w on my home network. I have a static ip address from my dsl provider. if i telnet into router and perform a ping i get replies. If i ping the outside from my laptop I can not. here is my config. any ideas? version 12.3 no service pad service tcp-keepalives-in service tcp-keepalives-out service…
-
What show commands after configuring Switch & ROuter?
After I'm done configuring a switch, I use the following show commands sh running config sh ip interface brief sh mac for routers sh running config sh ip interface brief sh ip route sho protocols Any other sh commands I should use?
-
Router for home use
Really isn't a certification question but thought I'd ask anyway. I'm just tired of SOHO routers. After having 3 linksys brick on me from heavy use, I tried an Engenius that was suppose to be a lot better. Well it bricked today under stress. I've heard good things about the 800 Series ISR's from Cisco. What I need for sure…
-
How To Write Cisco Exams
How does one write a Cisco exam? A private college near me has a Prometric testing centre, with no indication that they can administer the CCENT or CCNA certs. Thanks.
-
Hardware to use for CCNA LAB 8_28_2011
Take note this post was made on 8/28/2011 and is subject to change. In order to find out weather your switch is current enough for CCNA study you should visit this web page. Download Software - Cisco Systems Check for your switch and see if it supports the latest version IOS 12.4 if it does not support it you may want to…
-
Overlap between ICND1 and ICND2
Hey guys, A refreshing observation really...I used Odom's ICND1 book and now I'm using his ICND2 book and I'm noticing quite a bit of overlap. It's great because I'm moving through the content much faster than I had anticipated, as there is either repeated information or I have a solid foundation in a topic which I'm…
-
Just passed CCNA, Now What?
So I took and passed ICND2 and wanted to write a note of thanks to all the members participating in the CCNA forum. I'm a complete lurker of these forums (as you can see from my post count ) but some of the reading I've done, recommendations of various folks, links, etc have proven invaluable for my study prep. So thanks…
-
1760's worth it for just CCENT and CCNA
So, I am renewing my CCNA (doing the ICND 1 and 2 route) and after reading wendell's blog on routers for the 2011 ccna he is recommending the 1760 Cisco Cert Zone: CCNA Lab Series Part 6: The Best Router for CCNA, 2011 I was amazed at the prices on these and if they provide the needed functionality for the CCENT and CCNA…
-
PKCS Standards (*yawn*)
I have this list of PKCS standards in the CCNA Security OCG that feels like the author just arbitrarily threw into the book without the appropriate context to assist the reader in comprehension/retention. Standard Number Description PKCS #1 RSA Cryptography Standard PKCS #3 DH Key Agreement Standard PKCS #5 Password-Based…
-
Study Methods
Hi All, Havn't posted here for a while, but im back :) - Basically, I need some of your experiences and help. I've been studying on and off for the CCNA for the past year (Since the start of last September in fact) and am now, finally coming to the feeling of "I know this now" stuff. If you get me. You do, right? :) So,…
-
CCENT passed!
Another successful CCENT adventure completed. I've been studying on and off for 3 months but finally decided it was time to either conquer or die in the battlefield. Here is a summary of my resources: 1. CCNA Official Exam Certification Library, Third Edition by Wendell Odom This was my main source (ICND1 book). There are…
-
ICND1 & ICND 2 Syllabus
Hi people this is my first post in this forum.I really appreciate all the people over here for sharing resources and helping out each other . I am a complete newbie to this field and am preparing for CCNA exam .I have a query regarding the syllabus.I have Todd Lammle's sixth edition book so could you please tell me what…
-
Study materials!
So has any had something similar happen to them? I used Todd Lammle's book to study for the Network+ exam, and I passed but I didn't really like his method of writting, either way was thinking well his Network book worked for me so I can use his ccent book too. So I bought the book and started reading it and found I was…
-
Passed CCNA This Morning
Yep...did it on the first try. Targeted a 920 score and hit 881 . On reflection some of my CISCO Academy exams were harder..I think. Ron
-
Newbie
Hi to all TE members TE has a great forums and i hope that you'll help me of my decision so as i mentioned earlier I'm a zero knowledge at all Cisco's certificates I'm in to the security field , it really interest me (Securing Networks , Pen testing ) at the end of my Cisco's exams i want to obtain CCSP I'm still a college…
-
My Lab - Did I forget anything?
First off, thanks to everyone in the forums. I've been a lurker for a while, tons of great information here. Here's what I've put together for a lab based on pricing and availability. Looking at completing CCNA, CCNA-Security for now, then deciding if I want to pursue networking or security further as a career path.…
-
More popular the 640-802 or the double exam?
Fellas- Which is the More popular exam: the 640-802 or the double exam? Please tell me if you really know for instance, 2 times more people take the 802 to save money..etc. Also, What is the Best CCNA guide in your opinion? What is the best E-book as well and how much is reasonable for me to spend. I have a kindle and an…
-
CCNA Exam Cert. Guide by Wendell Odom Free Practice Exams.
Hi guys, I have the Cisco Press CCNA Exam Certification Guide by Wendell Odom and I would like to install the Boson practice exams both on a PC and a Laptop. I have the activation keys together with the book but I'm afraid that if I activate and download the exams on the PC, I won't be able to install them anymore on the…
-
what is the best CCNA Network Simulator out there?
Which one is recommended by most?
-
CCNA through CCNA:SEC lab
I'm only going to be taking CCNA and CCNA:Sec. I'm looking for a simple lab that that will take me through these two exams. I don't need for the lab to cover every single topic, just enough to get me through and get some hands on experience. I'm also short on money, so I've come up with the following, any feedback at all…
-
Lab equip. help is welcome here
In the quest to build a CCNA Lab that will cover things for future Cisco Certs as well the quest has started purchasing the following items... - Cisco 2924XL catalyst switch - Cisco 2501 router [FONT=Verdana,Arial,Tahoma]- Cisco 2500 2507 Wired Router 16 x Ethernet[/FONT] - Cisco 1604 router - Cisco Firewall 501 - US…
-
Anyone selling Cisco Equipment cheap?
Just spent hundreds on building a lab that is possibly too outdated... - Cisco 2924XL catalyst switch - Cisco 2501 router [FONT=Verdana,Arial,Tahoma]- Cisco 2500 2507 Wired Router 16 x Ethernet[/FONT] - Cisco 1604 router - Cisco Firewall 501 - US Robotics 56k External modems - Tons of Cat5 cable - 5 Console cables 1 meter…
-
eigrp wildcard & no auto-summary
Can you use a wildcard instead of no auto-summary? Is it such that if you don't use a wildcard then you would need to use no auto-summary command? Help, I'm confused!
-
how to remove enable secret?
yeah stupid question...can anyone tell me how to remove enable secret?
-
SSH and packet tracer
Hello I wonder if i am doing sth wrong or packet tracer doesn't have the SSH ability , crypto commands and so on.... Also i wonder if "command + ? " is enabled at exam or not. In reality it helps a lot.... Thanks..
-
home lab -- feeback
I was browsing ebay today and I found a deal that I thought was too good to pass up. However after doing some research it may not be as good as I thought. Here it is: 2520 running IOS 12.0 2 High Speed Serial ports 2 Low Speed Serial ports 1 Ethernet interface 1 ISDN interface 2513 running IOS 11 2 High Speed Serial…
-
Damn it feels good to be a gangsta...passed ICND2
So that was a much needed pass today. I went in feeling confident enough, though after reading these forums recently I couldn't help but feel nervous about the difficulty. It's been since summer 2009 that I passed ICND1 and I decided to s*** or get off the pot this summer. Started studying ICND2 material in early June and…
-
Cisco Certifications
I have finished my CompTIA goals and decided to take the dive into CCNA, I plan to do the ICND1&2 separately. I have never worked in the IT field before let alone any type of Cisco gear do you think its possible to do this without experience :