-
Impressions of CIT?
If any here has already passed the CIT exam could you offer some feedback on its difficulty?
-
BCMSN - passed 962
I am ready to take the BCMSN tomorrow morning. I have to concur with some of the other posters that this one seems harder then BCSI. I think the main reason is because I feel router stuff is easier to grasp and something you work more with then switching stuff, but probably just in the environments i have worked. Anyway, I…
-
My Brain is about to explode
Moving right onto BCMSN after BSCI might be causing a couple vessels in my Brain to get to the point of bursting. If I die studying for the CCNP, I have instruced my love ones to notify all of you. I feel like I'm tryng to decode the Matrix right now. I have dreams of ed_the_lad, MrD and the modemhumper laughing and…
-
Passed BCRAN
I passed the BCRAN exam with a 819. Not as much of a margin as I like, but a pass is a pass! :D Used the Cisco Press book, the CCNP flashcards book, Dyanamips, Netsim, A few routers, and OTJ.
-
Just passed BSCI
I just got done passing BSCI, so I thought I'd make that my first post. Got an 803. About halfway through the exam, on the first sim question, my keyboard died. Luckily, I had written out the answer, so when they hooked me back up, it only took a minute to configure. Anyway, I used The Bryant Advantage Study guides more…
-
QOS 642-642 Exam - Update PASSED
-
Dialer Profiles
Am i missing something here? I have 2 routers A and B connected via a bri interface. On rA i have created 2 dialer interfaces,dialer1 and dialer2. On rB i have also created 2 dialer interfaces dialer1 and dialer2.On rtb dialer1 is in dialer pool 1 and dialer2 is in dialer pool 2.If i config the bri on Rb in dialer pool 1,…
-
Spanning Tree Protocol question
Hi Experts I have a home lab with a couple of Cisco 2924 XL switches that I'm practising Spanning tree on. I've made 2 connections from each switch to the other to provide a redundant connection and see ST in action. On the 2924_A switch, there are also connections to my laptop and a Cisco PIX firewall, which are labelled.…
-
Radius/Tacacs
Anyone know of a good easy to use Radius or Tacacs application. I just want bare minimum, setup a couple of users, if a command list was possible to config great but not essential. The key is easy configuration that will take me 2 mins to setup.
-
Time it takes to get CCSP?
I currently hold a CCNA. I have several routers, switches and one pix 501 firewall at home. My CCNA expires in 1.5 years. Is this enough time to bang out all 5 exams for the CCSP? I'm 26, live alone and am currently single :D I have a lot of free time, especially this winter thanks in advance
-
BSCI : 642-901 vs 642-801
I am moving forward to CCNP after CCNA. And found my self confused about new exams, concretely about which BSCI to take, old or new one? I want to take BSCI in october. I dont want to be just certified (in that option I'll go for old one with no confusion), I want to invest my money and time wisely. My dilemma is : - Old…
-
cisco site update
as i'm in the process of reading technotes on cisco site preparing for test i noticed when goig to the site a major site update and new logo
-
642-552 SND now listed
So if I take & pass 642-551 before the end of the year, that'll still apply for my ccsp right? I just stared studying for the 551 and don't want to stop. Anyone know the differences between the two? http://www.cisco.com/web/learning/le3/le2/le37/le54/learning_certification_type_home.html
-
Starting CCNP. Good idea now?
I have not yet begun my adventures towards a CCNP. I was wondering, with some of you whom a little more familiar with the sutdy material, is there test that has material available now that would enabled me to begin my studies? I was looking at some of the revisions that were coming up at the begining of the year, two of…
-
Passed BSCI
2 down, 2 to go! Got a 912, using the Cisco Press Exam Certification Guide, the DocCD, and ExamCram off of Safari. Practice included a couple of routers, Dynamips, and work.
-
BCMSN Syllabus vs Test
I will be taking the BCMSN test within next 2 weeks. It is my first exam of the CCNP qualification. I just purchased some questions from Boson and was going through them. I want to take the NEW exam 642-812. With regard to the Syllabus:: I have books on the BCMSN and they all have a chapter or two on QOS however on the old…
-
cram day
i decided to take a cram day after working time over last weekend. i printed off the bcran blue print and plan to go through every bit of it today. redoing all study cbts not enough time to do book( due to the sleep processing that occurs after too many pages) but i will be reading cram sheet and notes. hopefully i'll end…
-
Finally passed BSCI
I was going to decapitate myself Al-Queda style if I failed BSCI for a third time, but alas I finally passed. I want to thank people like Ed the Lad who told me maybe I just wasn't good enough to be an NP. That was the drive I needed to kick it into high gear and pass.
-
New Exams
Ok, i've just got my hands on the new cisco course docs,many have been asking whats changed on the old exams etc etc.. The only exam i would worry about is the new ISCW as it has alot of dsl which isnt really possible to test on a home lab and lots of boring security, but then maybe you guys like security? Oh and one last…
-
Passed BGP
-
No Modems On BCRAN?
All of the material I have for the BCRAN still has at least a full chapter or video geared towards modems, but the exam blueprint has nothing on them. Any thoughts?
-
ISIS load balancing
Hello, I would like to ask for a help, actually I just forgot how load balancing works in ISIS. I am getting little bit confuse because of BGP. If I have same cost to the same destination I know it will select the closet L1/L2 router with the least path cost. What if I have two connected L1/L2 router connecting to the same…
-
Networking Tool Most in Use in the real world
Hi Everyone, Which networking analysis tool do you recommend to get familiar with for a CCNA currently shopping for jobs such as 1st line network support or NOC environment ETC. I am based in the UK Thank you
-
SDM Error
Has anyone seen this before? I'm trying to install on the router via the setup program. Here's the output: RouterP# *Mar 1 00:04:50.760: %SYS-5-CONFIG_I: Configured from console by SDM on vty0 (1 0.10.10.2) *Mar 1 00:04:54.566: %SYS-5-CONFIG_I: Configured from console by SDM on vty0 (1 0.10.10.2) *Mar 1 00:04:56.681:…
-
IPv6 Packet Header
Reading about the IPv6 header in Jeff Doyles book, I have a question regarding the DiffServ field and the flow label field. My understanding of DiffServ (CoS) is that certain applications/services have a higher priority over 'regular' traffic. Now I have read about flow labels, the router will examine the transport header…
-
scaled cisco scoring system
all - if one failed the BSCI with a score of 726, does anyone know approximately how many more questions would be needed to be answered correctly in order to get to the passing 776? thanks!
-
ip accounting
Can anyone point me to some detailed info on the cisco command "ip accounting"? I'm getting a random , 10 to 20 minute flood of traffic that's maxing out a 5-T1 multilink. I'd like to know if I can use ip accounting to find out what is going on? Thank you for your time
-
Simulation questions on BCMSN
Hi All I'm due to take my BCMSN soon, and was wondering what the type of simulation questions are like and how many there are, roughly? Are they along the lines of STP, VTP, QoS on IOS switches and so on, and do we need to be able to configure CatOS switches, CEF, LACP? Thx Dilan
-
New exams
I know you'll probably be screaming at your monitors whilst reading this but when exactly is the last day to book. This is confusing me, do I have to book before october 15? Or can I still book until the end of the year? I would like to get BSCI and BCRAN done before the end of the year, I have already booked my BSCI but I…
-
Ugh, failed BSCI
the exam is so much harder than any prep exams out there, i don't care what anyone says. Although I was very surprised to see what the needed passing score was at the beginning of the test, it was significantly lower than what I thought it would be. I got hammered with obscure facts on EIGRP and there was way too much…
-
interesting ospf
i recently was working on an ospf adjaceny issue and noticed something and wanted to get some feedback. on the "head in/core" router had the network statement of net 10.0.0.0 0.0.255.255 area 0 then another downstream router had net 10.0.200.0 0.0.0.255 area 10.0.200.0
-
CCNP after CCNA even if no comms experience?
Hi all, I'm currently working in a role where our LAN/WAN management is outsourced/managed by our telecomms provider meaning I don't get much hands on with our Cisco kit. I am probably about a month away from passing CCNA and am pondering on where to go after I have this qualification? Would I be better holding off on…
-
Tough question
My simple tough question is, I am going to sit the BSCI exam on Wednesday of next week. If I fail(which I hope I dont) am I not able to take this thing again for 180 days? That would put it out the scope and then I just have to wait for the new tests? Let me know please before i schedule, I want to be extra ready.
-
bcran
and the count down begins just purchased my voucher, finished cisco press and will finish exam cram today.. labs on saturday and more fine tuning for eom.... lol pch
-
books for BCRAN & CIT
any suggestions, cisco press or Sybex etc, would appreciate some views on books used.
-
Catherine Paquet/Diane Teare -- good for new CCNP exam?
Is this book still valid for bsci studies? I bought this a few months ago and I'd hate it to go to waste. I see now there is more IPv6 stuff such as configuring/verify IPv6 with OSPF and IPv4 and 6 interoperation... Which book would you suggest to study for the NEW BSCI exam? I have TCP/IP Volume 1 and the CCNP Self Study…
-
help
i just passed my ccna i want to start a ccnp but things have changed in the ccnp i have the boson net sim for ccnp also all the knowledgenet computer based training any ideas
-
vrf config
anyone have any experience with vrf? i have read over cisco docs and see the config example but i'm unsure if it will work correctly.
-
order of exams
any suggestion to the order I should take? Also, does anyone think you can take the CIT or Remote access exam without doing the routing or switching exam study first? Thanks
-
MICA/octal
Quick question. Been reading through some BCRAN material, and in regards to async modem connections I came across the term MICA (modem ISDN channel aggregation) & 8-port octal cabling; dealing with connecting multiple modems to a single router interface. I understand the technologies, but was wondering which technology is…
-
Passed BSCI today!
:D well 3rd time lucky! got 835 so still pretty close to the mark but a pass is a pass!! thought i would post sort of questions i had whilst i remember.. IPv4 - IPv6 methods , NAT+Tunnel+Dual Stack IPv6 IP addresses that were valid, watch out for ::: and :: used twice Default Rip send/rec and how to force v1 only out an…
-
is it possible to finish ccnp in 4 months?
well i don't have much time left before i get my ccnp done do you think its possible to finish ccnp in 4 months? 4 tests ? thanks..excuse me on any typing mistakes..i am completely exhausted from work today..
-
Failed 642-801 today - One week to go
I have taken many cert tests before, but this one was a real bear. I was only up to question 45 when the time ran out. Got a 550. I probably could have passed if I had more time. Transcender did not prepare me at all for this one. There was stuff on there about RIP, IPv6, etc. Here is my dilemma. I need to take a 642 test…
-
5500 switch
i have a 5500 switch that came with sup3G and atm switch/processor i can console into the atm processor but can't connect to sup.. i was able to before any ideas? update i figured it out the console mode button
-
6000 chassis
does anyone know if a 6500 supervisor would work in a 6000 series chassis?
-
Testlets.
They wouldn't end. The testlets -- they wouldn't stop. I kept waiting for the multiple choice questions -- they never came! One giant humongous neverending Shaggy Dog Story Case Study. They just kept adding stuff.... and adding stuff.... and adding stuff. I quickly figured out to just jump to the bottom of each new testlet…
-
642-811 UPDATE = PASSED!(811) Next CIT/BSCI ??
Hi guys, i goin to take my switching on this coming friday... feel vry anticipated !! any recommendation and suggestion from all the senior ?? hahaha i have passed BCMSN !!!! with the score of 811
-
Need one quick help
Hello, what is the meaning of Null0 i IP route command ex: ip route 172.16.255.0 255.255.255.0 Null0 ( it should be next hop or interface). Actually I encounter this before but I just forgot what's the use of this Null0.
-
cCVP Transcender
Has anyone used Transcender for study materials for CCVP?...... Used to work for old school MCSE exams. They have two products. One for QOS and another one.
-
ccvp track
Can someone recommmend exam order and also study materials such as books or kits........I do have access to a lab with call manager with two routers. 2811 and 2800 with switches....... I think it would be nice to find a bunch of problems u coudl work on or labs that are related to the exams..............i also have a new…
-
Question about MPLS
Hi everyone, I am trying to learn to configure MPLS. My question is does 3600 and 4500 series routers support MPLS ? Thanks, Bhushan
-
Passed BCMSN
That was the toughest one yet! Onward and upward to the bcran & cit...b4 the new year ;)
-
Multipoint FR
Thaught it might be better to start a new thread on this one Has anyone used multipoint in a live network or is it true what Yankee says that its pretty non existent? If its true i've been learning alot of useless info. If multipoint interfaces are not used is there any point to use FRTS, as class based shaping will do the…
-
Propagating a default route in eigrp
I just wondering about the different methods to propagate a default route using eigrp. Lets say i have my gateway router to the internet with the external port ip address 200.0.10.1/30, far side 200.0.0.2 So i have eigrp enabled 1) i could create a static route, ip route 0.0.0.0 0.0.0.0 200.0.10.2 router eigrp 1 no auto…
-
IP Summarization
Hi, Please advise, I have netowrk 172.16.0.0/16 172.17.0.0/16 172.18.0.0/16 172.19.0.0/16 Could these network summarized as 172.16.0.0/14 ? I'm going to do a manual summarization on RIPv2 interface. TQVM in advance.
-
CISCO about Networking Academy CCNP updates
http://www.cisco.com/web/learning/netacad/landing/CCNPupdate.html
-
HELP OSPF NBMA
Hello, can someone send me sample configuration of OSPF NBMA -ip ospf network Broadcast -ip ospf network non-broadcast -ip ospf network point-to-multipoint -ip ospf network point-to-point I am confuse what command to use if with neighbor or with neighbor priority or cost. Thanks
-
Anybody see CCNP TV??
i had alot going on yesterday and wasn't able to catch the ccnp tv presentation on the revised program. any info?
-
Eigrp over FR
I have a partial mesh topology. RTA is the hub, RTD and RTF are the spokes. All 3 routers are using multipoint interfaces. RTA ip 100.1.1.1/29 RTD ip 100.1.1.2/29 RTF ip 100.1.1.3/29 My Fr pvc on RTA goes to RTD and RTF on bidir dlci's 100 and 400 respectfully. I have left everything default so the mapping is automatic…
-
IS-IS is very difficult
Last night I started reading about IS-IS and it is really really complicated. Some I can understand like the Level1 ,2 ,1-2. CLNP, NSAP,NET,SNAP, difference between 10586 and RFC1195. The difficult part is the content of the PDU. Do I need to know the TLV or memorize the code on the exam, and I don't know if I am correct…
-
642-055 ARSFE
Whats the deal with this exam? http://www.cisco.com/web/learning/le3/current_exams/642-055.html
-
Networking Academy 5/6 Rocks!
Yeah I know part 5 is BSCI, which I already passed, but I wanted more hands-on. So anyway, the class rocks. There are only 3 of us in it. Each of us get a rack which includes 6 2811 routers, 2 3550's, 1 3560, 2 2950s, 3 2600 routers, 3 PIX firewalls and an Adtran 500. We get 8 lab hours per week for 16 weeks :D
-
Off to take BSCI this morning! - update = PASSED
I feel that I am fully prepared, lets hope the Cisco people are not going to throw me a curve ball. Here is the bad news, as soon as I get back from the test, if i pass, time to start studying for BCMSN! Ill report as soon as return! Update *** Scored a 989! I was surprised as there were a couple that threw me for a…
-
Getting in Gear for CCNP pre 2007 Change
Hello to All, I am going to try to get the CCNP before the year is out/the change happens. I have a friend who has his CCIE (Voice) who told me if someone was really focused, they could get their NP in 4 months by taking a test a month. So, all I've been listning to is the theme from "Rocky" all week. Has anyone tried this…
-
551 Done. CCSP now!
Got high 900. The sim was screwed up. I put in the correct commands but they kept coming back with ? Oh well! Now it's time to get some sleep at night instead of studying!!!
-
What will happen if I have 2 ABR on my area 0
I just want to know which path will select if 2 ABR exists in same destination. I didn't try yet on my home lab but can you tell me something about this scenario. Thanks
-
Question for the experts
I have created a lab set up. I have Router1, Router2, and Router3, connected via a Frame Relay cloud. Router1 is my hub. 2 and 3 are the spokes. I can successfully ping from R1 to both of R2 and R3 serial interfaces and vice versa. I can not ping R3 from R2 and can not ping R2 from R3. Below is the config from R2 and R3 -…
-
Frame Relay Question
I have a lab set up with 3 routers, over a frame relay cloud. I enabled loopback interfaces on all 3 routers and turn on rip version 2. Nothing passes over the frame to send the updates. I run a debug and I see everything being fowarded to the loopback interfaces which is to say it goes no where. I have broadcast enabled…
-
Dynamips - newbie question
I believe this will be a no brainer but I am new to dynamips. I was using boson and decided it was crap for what I was after. I got everything installed with dynagen and replaced the exe with the latest dynamips release but when i launch the simple lab 1 i get the error below: *** Error: Could not connect to server:…
-
CCNP Update rumors are true
Well Certification Magazine has an article on the rumors here. www.certmag.com/articles/templates/cmag_nl_execbriefs_content.asp?articleid=2251&zoneid=60 www.cisco.com/go/ccnp
-
Can anyone recommend BSCI lab book/resources?
Hello All - I'm looking for a comprehensive lab manual to supplement the Cisco Press BSCI book. Does anyone know of a book where you're given actual lab tasks (with corresponding answers) that you can perform on your own equipment? Thanks all!
-
MPLS
In a recent post in the CCDA - CCDP forum keenon wrote the following: Im trying my best to understand the concept of MPLS. I understand why it was developed and why it was needed but I cant seem to nail the theory behind it all. Does it work on the same concept of dlci's, vc's and other such things, but at layer 3? On a…
-
Nailed the IPS exam!
Wow, I even blew one of the sims!!! Totally new format! Had places where you click a button to simulate and attack. Very cool. Got a 95x score. SND here I come!
-
CCNP TV debut
CCNP TV debuts it’s first broadcast August 30, 2006 CCNP TV presents its first broadcast, bringing you information on the CCNP Program and Wireless in the CCNP environment. Register now to reserve your space. Date: Wednesday, August 30, 2006 Time: 11 a.m. Eastern Time/8 a.m. Pacific Time, and 16:00 GMT Title: CCNP Program…
-
Disabling debug output
When the console is being overrun with a debug is there a way to disable the debug or you must do a reboot? I was playing with hsrp, i set the timer to msec 15 45, as you can imagine lots of hellos arrive, when i try to type undebug all i get no response as the console is too busy, any solution apart from reboot? Also i…
-
One To Go
What a day, woke 6am for review, exam at 10am,arrived at test centre 9am. Asked if i could start earlier,they said "no problem" until major problem, they cant access the vue server to downlaod the exam. As the test center girls english wasnt too good i spent the next 30mins on the phone to an aussie guy trying to diagnose…
-
Passed BCMSN!!!
:D Finally I can take a short break. Pass BCMSN today with a score of 875. Now I'm 1/2 way to the CCNP. I intend to take BCRAN next, and top it off with a little bit of CIT. Any pointers on what you other folks are using to study for the BCRAN exam?
-
Difference between 3524 and 3550
Im thinking of purchasing a 3524 with 1 Gigabit uplink for $200 but I noticed that a 3550 cost about 800 bucks extra. Is there a difference between these two switches, and is it sufficient for the CCNP study if I do go with the 3524. Thanks
-
Go for CCNP or wait?
Hello everyone, I passed my CCNA this last weekend, Question now is: I want to go for the CCSP and CCNP. Naturally, one would go for the CCNP first, however with these new exams out, I would rather study for the newer material. I just have to wait for the books to come out. So what do I do in the mean time? Study for the…
-
DHCP server question
I configured my router as a DHCP server and I want other routers to learn the IP address automatically, for example routerA request a IP address to routerDHCP server. Is this possible?
-
Query about IGP to EGP Redistribution
Hi everyone, Can anyone tell how would you advertise IGP routes into an EGP: by redistributing routes from IGP to EGP or via static network statements? and explain it to me. Thanks
-
Help please FD and RD
Hello ppl, just want to ask for your help I am totally confused about Feassible Distance and Reported Distance. I tried this on a home lab and forgot the rules and I don't want to go back again to search. Okay I understand the Successor thing and a feassible successor. If for example my Successor failed and I have a FS…
-
the route question.
above is my lab. the following is the "sh ip route" result on middle2520. the last part would be all configurations for each device in the lab. the lab works fine. my question is about the route. see I already define a P-to-P from middle2520 to c2620, why the routes(on middle2520) to my vlans must go through bottom2520,…
-
New cisco recert policy
Cisco Announces Updated Policy That Provides New Options for Professional Level Re-Certification Effective 8/18/2006, individuals who hold an active CCNP, CCDP, CCIP, CCSP, or CCVP will re-certify their professional level certifications when they pass any Cisco professional level certification exam. Certification holders…
-
Using a 2600 as a frame relay switch
Is there any way to get 3 or more serial ports in a 2600 to use as a frame relay switch? I keep reading conflicting info. Eg, I have read that if you use both smart serial ports on a WIC-2t, you shouldn't use any other serial ports either in the other WIC slot or on a NM. I have also read that the 2600 doesn't support…
-
switch or not to switch
i met someone recently while i was working looking to get rid of a few 5500s they have 10/100 cards sup 3 and some have atm mods .. i'm thinking on getting 1 or 2 .. any thoughts.. i would like to mess with the atm
-
Installing new 877 router
Hi Guys I am in the process of replacing a Cisco 837 router with a 877 model. My 837 has two IP's on the one Ethernet0 interface. 192.168.0.1 and 10.0.0.254 as a secondary IP. I can not see how I can add a secondary IP to the FastEthernet0/vlan1 port on my new 877 router? Any suggestions Thanks
-
command question
hi everybody i have the next problem when i perform a telnet on a 7200 router and i write a wrong ip address the router yields this: Trying 129.56.81.111 ... that's not the problem, the problem is when i want to interrupt this process i perform ctrl+z, or ctrl+c, or crtl+break and i can't stop it after 30 secs which is a…
-
2950 Switches to become outdated
Hi! Im thinking of starting my CCNP but will my old hardware used for the CCNA work for the CCNP exams or do I need to purchase new switches? I currently have 2 2950 12 port switches a 2924XL and a 1924. Will this survive through the CCNP cert.
-
4000series Upgrades...
Whats the deal with the 4000 series switches. They come with a version of the CatOS default, but can be upgraded to run IOS, correct? On the BCMSN is knowing all of the "set etc..." type commands for the CatOS required, or do I just need to know the regular IOS commands? Thanks
-
Multicasting/QoS
Hey guys been using 2 sources to study for the BCMSN: CCNP Complete & Cisco Press...I'm having some mental snags on the multicasting & QoS sections. Everything else seems to fall right into place. Can anyone refer me to a concise summary, perhaps online, that would give me the basics before I continue on and retry the…
-
point-to-point? broadcast?
I'm doing frame-relay lab. Have 2 subinterfaces set as point-to-point. but "sh frame-realy pvc" displays something i don't understand. here it is. c2620#sh frame-relay pvc PVC Statistics for interface Serial0/0 (Frame Relay DTE) Active Inactive Deleted Static Local 2 0 0 0 Switched 0 0 0 0 Unused 0 0 0 0 DLCI = 150, DLCI…
-
CCNP course change
http://tools.cisco.com/E-Learning-IT/LPCM/LpcmLLController?action=CourseDesc&COURSE_ID=4953 http://tools.cisco.com/E-Learning-IT/LPCM/LpcmLLController?action=CourseDesc&COURSE_ID=4954
-
Need HELP installing Dynagen or Dynamips on Linux
Hello everybody, I am currently using dynamips on windows XP and I have 2 more laptops and want to install Dynamips/dynagen. I am using Redhat Linux , can someone help me how to install it on linux machine. Thanks
-
CallManager Express - what am I missing?
I'm trying to install CallManager Express onto a Cisco 1760 just to play around with an hopefully learn something from. I have the latest voice IOS for this router and the latest CallManager Express for this router. I loaded the IOS image and then started reading through the installation doco for CallManager Express. In…
-
Knocked another one out
i have kicked butt today on the BSCI scoring 967 i felt that i had did pretty good on the test... but not that good alot of questions seems to be direct, read most of them twice ..including the usual stuff on cisco related test STUDY GROUP NOW WORKING ON BCRAN... maybe we can turn out CCNPs within a few more months tx, j
-
GOT overlapping message
Guy, I am configuring my router but when I assign an address with it's classfull network it gives em overlapping with fastherethenet 0/0 my assign ip address in fa0/0 192.168.10.1 /24 and for my fa1/0 192.168.10 /24 but it's giving me overlapping msg.
-
Preparing for BCMSN
This is my first post, new member here. Scheduled my BCMSN for August 25. Wanted to schedule it for the 18th but I am weak in the QoS, Redundancy, and securing portions. So I figured I could cram those portions in two weeks as well as brushing up on the other portions and see how well I do.
-
Need help with my CCNP Lab
Hi all, I was wondering if at all I can use only Cisco 3600 routers for the CCNP course. I know most of the equipment that is listed is all 2500, 2600 Seriers routers. The reason that I am asking is because my work can provide me with as many Cisco 3600 routers that I need. Because of some contract support work that we do.…
-
Need help on VLSM
Please help me solve this sample lab correct me if I am wrong with my solution. Given network is 192.168.24.0/22 or mask of 252 Subtract 256 – 252 = gives me block size of 4 These arethe Subnets 0, 4, 8, 12, 16, 20 up to 252, 256 that ISP distribute. 192.168.4.0 192.168.8.0 192.168.20.0 Up to 192.168.252.0 ISP provide me…