-
CiscoID is pending!!! badly need help!!!
hi, I am going to take my CCNA certification this September and I was emailed by pearson vue for a promotion code for a discount but everytime I input the code during scheduling the test on their site, a pop up message says, this candidate is not available for a discount. /? I also noticed that my Cisco ID: ID Pending has…
-
Ccent
I am going to study hard to pass it within next month. I have no choice will quit my job if I have to currently in a position as a helpdesk support person. I really feel down at my age I should be doing a higher position cause of my social anxiety issue I been stuck. I am thinking of finishing the CCNA and applying for a…
-
Practice labs in packet tracer
Does anyone know where I can find some good troubleshooting labs? I've looked around in a few forums but not had much luck at the moment. I know there are a few on this website which I have looked at but I was wondering if anyone had any files etc? Sorry if this has already been posted. I did have a look through the first…
-
2911 and CCP
I just acquired a 2911 from a friend. When I access the device via http I just get a basic page. Isn't CCP suppose to provide more options than what is in pic?
-
ICND2 in 5 weeks or start the new track?
Hello all! I've been out of the cert game for a bit since I started working so I never got around to finishing ICND2. I just found out today my track is ending. I blew by ICND1 two years ago using TrainSignal, Cisco Netacademy, and the Wendell Odom books. Basically breathed and slept Cisco for 3 months while unemployed.…
-
Where do we use "ip default-network 0.0.0.0"?
I'm familiar with using "ip route 0.0.0.0 0.0.0.0 s0/0/0" to forward all unknown ip traffic to a default route, but where and when do we use "ip default-network 0.0.0.0"? Is it different from "ip route 0.0.0.0 0.0.0.0 s0/0/0" at all?
-
CCNA obtained!
Just passed my CCNA on Monday with a 945. Took 5 weeks of self study (same as CCENT) with the resources provided by WGU: Odom, Pearson Lab Simulator, Learnkey videos, & Cisco practice exams. The Odom book really does have everything you need to know for the exam, coupled with Lab Simulator for CLI practice. Now time to…
-
Passed ICND2 Yesterday. (re-certified)
Yup, I passed the ICND2 yesterday with a score of 846. I was surprised I passed since when I sat for the exam I had a head cold plus Red Bull withdrawal shakes. Both my hands were actually shaking when I reached for the start button on the exam. My current CCNA was set to expire on August 31, 2013 aka in nine days.... The…
-
Question on learning the new CCENT material
I have a slight demand at my job to know Cisco. The demand isn't high enough to justify purchasing hardware, software, and loads of different books to learn the material though. I have the new Wendell Odom 100-101 book for the CCENT, but I'd like to keep the additional needs down to just some free software like GNS3. Is it…
-
Static routing question
I've been doing packet tracer assignments and I came across packet tracert lab 1.3.5. Where you need to assign static routes from network 192.168.1.0 to 192.168.4.0 and another static route from 192.168.4.0 to 192.168.1.0. The whole point is to have PC 1 on the 192.168.1.0 network to ping PC2 on the 192.168.4.0 network.…
-
Parser View vs.Custom Privilege Level
I've been reading back through the OCG creating notes and I have a question. Why would you pick pick a Parser View over a custom privilege level and vice versa?
-
After September 30th, what if...? issue
What if I take and pass the ICND I tess this month, but either fail the ICND 2 test or am not ready to take it before September 30th? Now it's August and the new CCNA tests are here. Will the new 200-101 go with the 640-822, or will I have to retake the first test as the new one?
-
For CCENT, should I memorize raw # of hosts/networks per class?
I know that understanding/memorizing the octet range, valid network numbers and total number for a class (2^7, 2^14, etc) are important for the exams. My question is, should I memorize long numbers like 2,097,152 (total number of networks for Class C) and 16,777,214 (total number of hosts for class A network)? I'm curious…
-
Here's my collection of study materials, which is the best to go with first?
eBooks:* CCNA Exploration Companion Guide - Network Fundamentals * CCNA Exploration Course Booklet - Routing Protocols and Concepts v4.0 * CCNA Exploration Course Booklet - LAN Switching and Wireless v 4.0 * CCNA Exploration Companion Guide - Accessing the WAN * Todd Lammle CCNA 640-802 (7th Edition) * Oreilly Network…
-
I cant see the section for this cisco route
Anyone have taken CCNA data centre? if so has anyone had any luck with it? also has to helped you? if you havent, would it be something you considered doing once you got routing and switching?
-
Cisco SMB Solutions for Engineers 650-196?
Has anyone ever taken the Cisco SMB Solutions for Engineers 650-196 or know someone who has? I've been asked by my employer to study for and pass this exam. I've never heard of it before and I can't even find a book on it. The only thing I've found for study materials is practice questions, which isn't exactly how I like…
-
Question regarding certificates to obtain before Cisco
If you have your A+ and Network+ certification, should you go for the CCENT, or straight into CCNA? Also, should you obtain the Security+ certification if you're going the Cisco route?
-
ICND 1 vs ICND 2 topics
I have been trying really hard in revision for the CCNA, I'm looking to take it in parts but am not sure which topics are covered in each exam since there are changes and I have been learning from books that cover all the topics without distinction. The following topics are those that I have covered in books, please can…
-
Router not recognizing USB stick.
Good morning! I just began setting up my CCNP/CCNA-V lab and started to upgrade the IOS versions on them. I was initially going to just install the IOS via Flash drive but I soon discovered that only 2 of my 4 1841's are recognizing my flash drive. I really don't want to think that the usb port is simply bad because that…
-
ACL help
I configured a simple lab of two computers a switch and a router. The ip addresses are 192.168.0.1 and .4 for the PCS .250 / .254 for switch and router respectively. I want to deny a PING from the .4 to the .1. If someone can explain what I am doing wrong with my access-list I'd Really appreciate it because as of right now…
-
CCNA failed twice...3rd attempt need some advice
Good evening Fellows! I just need some advice...I failed twice the composite 640-802 with my scores below: Describe how a network works Last 38% / Today 63% Switch and VLAN Last 57%/ Today 71% IP Addressing Last 67%/ Today 50% Conf Routers and tshoot Last 69%/ Today 54% WLAN Last 100%/ Today 100% Identify sec threats Last…
-
My new CCENT book is available! New ICND2 book out in Sept
Amazon.com: CCENT Study Guide: Exam 100-101 (ICND1) eBook: Todd Lammle: Kindle Store Right now it is available via Kindle, but the print version will be out in less than 2 weeks. This book is probably the most intense CCNA book I have ever written, and is the largest to date! It's important you don't get fooled by the name…
-
Phone!!!
yes, for those that are confused, so was i... Just watching the CBT Nuggets video, ICND2: Switch STP: Enhancements to STP, and at 10:39 in jeremy cioara shouts PHONE!!! - Must have forgot to remove it? Anybody else find this funny or am i sad? :P
-
What's the current state of WAN for companies?
I want to know what is the current state of WAN connectivities at big companies? The Cisco NetAcad material talks about leased lines, ISDN, Frame Relay, and ATM. Besides them, there is Cable and DSL connection to the Internet that home users like me are familiar with. The Cisco NetAcad material says X.25 is old and almost…
-
CLI online simulator
I work Night shift and would love to be able to practice the commands during my downtime at work. I believe I saw somewhere before, of a website that allows you to practice the commands without having to download any of the simulators (which I have on my computers). Does anyone of a website with this feature for CCNA?…
-
What events change VTP revision number?
Each time add or delete a vlan, the revision number increases by 1. When rename the VTP domain name, the revision number is reset to 0. Other than these two events, anything else changes VTP revision numbers? I seem to read somewhere that naming a VLAN also increases VTP revision number. I tried it on my 2950. It does not…
-
How to Download Ringtones and Desktops
I recently purchased a Cisco 7960 IP Phone and after about 4-6 hours managed to get it to work. Packet Tracer didn't require installing any files on the Router when I did it on there. But, while I did get it to download the firmware and assign a number to the phone and created some call legs between that router and my…
-
Ccna
Hey Guys, Will I be able to get my CCNA before 31st of september? How many hours of study do I have to put in every day please advise.
-
CDP commands
Hi What can be the right ans for the following questions- Which Cisco IOS command displays the frequency at which packets are sent? show cdp entry show cdp traffic show cdp interface show cdp neighbors 9. What information is included in the output of the command show cdp interface? remote port ID remote device ID…
-
Interface loopback
Hellow friends Hope all of you will be fine..i have 1 question about interface loopback ..what is this and what is use of it and how can we configure it . Thanks a lot
-
Lab and ISO question
I am thinking to build a lab for the CCNA, but I am unsure about the IOS version. I have read Roguetadhg's thread and he said IOS 12.4 is a must. Is a MUST is because the IOS is something that cannot be upgradable? Thanks
-
ICND2 (640-816) Pass!
Passed the ICND2 this morning with a 960, woot woot! So I now officially hold the CCNA. Next up, CEHv8!
-
Passed ICND2!
Hello all, Like so many others, I have browsed the forums for info, tips and inspiration without registering or posting. I passed the ICND2 yesterday with a 944 and I can honestly say that I couldn't have done it without TE. SO I took the CCNA exam for the first time in 1999. Failed by 6 points. If I had known better, I…
-
Keepalive Interface on a switch, possible?
Afternoon, I know how to do this on a router's interface but wanted to know if it's possible to do this on a switch interface? Got a home lab setup but don't have more than a laptop and I need to ping a machine in a different lan to the laptop. Thanks in advance.
-
Can someone help me to troubleshoot Pakcet Tracer wireless access
I'm doing Cisco NetAcademy PT Activity 7.3.2 Configuring wireless LAN Access. I went through all the steps. The Packet Tracer status says it's 100% complete. But the wireless router just doesn't talk to the network. Please delete the '.doc' from the file name to run it in Packet Tracer. TIA. Attachment not found.
-
Stumped on a subnetting question...
So I was asked at an interview Given 192.168.2.56/20, what is the network, broadcast, first usable, and last usable? I was able to answer that part. Network: 192.168.0.0 Broadcast: 192.168.15.254 1st Usable: 192.168.0.1 Last Usable: 192.168.15.254 Then they asked me what was the subnet mask if that IP required 4 subnets…
-
CCNA Exploration Course & Networking Academy Students....
I'm in the Cisco Net Academy, I completed level 2 (Routing Protocols & Concepts) and about to start the level 3 course (LAN Switching & Wireless), then start level 4 (Accessing the WAN) in about 8 weeks. I was off to a rocky start with the routing, but once I really grasped subnetting, all the labs became way easier. I…
-
ICND1 questions
Hi I got this questions from cisco website- A)What are two major benefits of adding a bridge to a network? (Choose two) 1)isolating potential network problems to specific segments 2)increasing the speed of a network 3) extending a LAN to cover greater distances by joining multiple segments 4) creating fewer collision domains…
-
INTRO 640-821 + ICND2 640-816 = CCNA?
Hi Guys, Wonder if anyone can help me. Last September I passed the INTRO 640-821 exam. This was back when the CCNA was split into two parts, CCNA1&2 and CCNA3&4. The INTRO 640-821 exam represented CCNA1&2. Now that this has been replaced with ICND 1 and 2, what i need to know is whether my passed INTRO exam will count as…
-
book
Hi Any suggestions for some good books for ccna hands-on? Warm Regards
-
Dilema CCNA or ICND2
Hello! Rite, I'm thinking should I take the ICND2 old (50 questions) or should I just take the (old) CCNA exam? and split it 50/50 25 questions ICND1 25 questions ICND2 together.I currently passed ICND1 in July so it's still fresh.My thought is that I'll know half the test at least if taken in full "CCNA". If I just take…
-
New to home lab setup
I am looking to set up a home lab and I am not willing to purchase from a "kit" store because of the markup. This puts me at a disadvantage since purchasing network hardware is totally new to me and I want to make sure I get what I want. After some research, I still am confused on certain things. First of all, I am…
-
Inter-Vlan Routing
Ok so I made a simple lab to assess my understanding of inter-vlan routing. I use PT so its not that advanced. The problem I am having is the Vlans can not communicate with each other yet they can communicate with the router and the router can ping them. It's driving me insane because I've looked through all my configs and…
-
Jabber
Hello, Has anyone installed and tested Jabber on the UC500 series without any issues? I've been reading on the Cisco forums and there seems to be some limitations. Also I'm just wondering whether Android phones are also supported?
-
Passed ICND2 640-816
Well it's been just about 2 months since I passed ICND1 (took 4 tries in all) and I've nailed ICND2 first time with a score of 958/1000. A wide variety of topics were covered so make sure to cover everything for the exam. I used: Official Cert Guide by Wendell Odom CBT Nuggets Chris Bryant Boson practice exams…
-
Passed ICND2 (old test) last night
It was actually harder than I thought. I think I spent literally like 25 minutes on one of the lab sims wracking my brain for the correct commands. Still, it was a fun test. Good luck to everyone else trying to get it done before the old test gets retired!
-
Inter-VLAN Routing Problem
I've spent a few days on these labs and I've redone them and they wont work. Here's the configs R1 Router#sh run Building configuration... Current configuration : 1334 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router !…
-
Anyone get to play with the Cisco Nexus 1000V's yet?
I dont get the luxury to mess with the Nexus 1000V's in a lab or prod at the current data center I work at. We only use Nexus 7009, 7018, 5596UP, and FEX 2K's. I have been looking at the Nexus 1000V's data sheets and "at a glance" and they look freaking sweet! Looks like they have tailored to VMware product suite and the…
-
Spanning Tree Speculation
According to my studies I've come to the following conclusions: When root cost is used to determine the root port or the designated port, it seems that only the outbound interface towards the root switch is factored. For example, if you look at the attached diagram, it appears that only SW2's Gi0/2 port and SW3's Gi0/1 are…
-
Question About My Home Lab
Will be attempting to take the CCNA before winter. I am trying to hookup a 2621XM to my cable modem. My ISP has given me a static IP but I am unable to ping out. I am not quite sure what I am doing wrong. The IP address on Fa0/0 is the static IP which my ISP gave me. Any help would be greatly appreciated. Thanks! Building…
-
I took the 640-816 today and I passed!!!
The material was easier for me than the CCENT however it took me a lot longer than expected. As a result with 10 mins left and 11 problems to go I was faced with an Simulation problem and I knew if I completed it ( I knew how) I wouldn't have enough time to finish the test and I got teary eyed ( and I don't cry!). But I…
-
Failed to eliminate ICND 2
Hello All, Took the ICND 2 today and failed w/ a 790.... Was nervous going in and knew that I'd bomb some parts and its exactly what happened...bombed the 2 sections that I "thought" I knew well. Serves me right , because I actually skipped those chapters when I was reading. Breakdown: VLANs and inter-switch comms53% IP…
-
Passed ICND1!
Got a 917. I was impressed with my category breakdowns until I saw the WAN configuration at 40%. That's one area that I don't deal with it so I'm not taking it too hard. Thank you all for your help. It was greatly appreciated!
-
Good test center experience in NYC?
Wow! Just learned it costs $300 to take the CCNA exam. Anyway, I found the following test centers around 34th Street in New York City. Do any of you know which one gives a good test-taking experience? Does it matter? [TH="width: 1%"][/TH] [TH][/TH] [TH="width: 30%"]Test Center[/TH] [TH]Information[/TH] [TH="align:…
-
CUCM and voice questions
Hi Guys / Girls, I wonder if you can help me out, I have a few queries: * Do you need CCME and a Voice router to run CUCM. I pointed our phones to the tftp 150 of our CUCM server today, which has got me thinking if CCME needs to be on the router? * We have a UC520 box. How can I change soft keys and voicemail etc with…
-
ASA Bootcamps
In my job I run Ironport and firewalls. I've learned quite a bit about the former but need some help on the latter (only cisco cert I have is CCENT). I have an an opportunity to request budgeted funds for a training course or two... does anyone have any recommendations for a Cisco firewall bootcamp, or learning course? So…
-
STP BPDU Hellos
In my ICND2 study book I quote: 1. The root creates and sends a Hello BPDU, with a cost of 0, out all its working interfaces (those in Forwarding State). 2. The nonroot switches receive the Hello on their root ports. After changing the Hello to list their own bridge ID as the sender's BID, and listing that switch's root…
-
AAA config missing something
Hi All, I am just doing a practice lab ( dont worry about passwords and IPs below). Im using Packet Tracer because computer is struggling with GNS again. Can someone take a quick look at my config and tell me what im missing or atleast point me where to look. Ive been staring at it for about 40 mins, cant see why this AAA…
-
CCDA / CCDE Prepration
Hi Team , I am Rajesh and has a total experience of 9 + years in networks . Most of my experience is in Planning and design of Telco network . So I was thinking to have some certifications on Design part . I am starting from CCDA and expecting CCDE by next year . So please recommend me how to prepare for the same. Also…
-
Passed CCDP
I finally pulled my finger out and sat the ARCH exam last thursday. Thankfully i passed. For those interested i studied solely from the Arch exam guide and the Cisco Design zone when things werent being picked up from the book. The material covered in ARCH is wayyyyy more interesting than the DA. However, the exam style…
-
On the first chapter of ICND2 Odom book, am i too late?
Afternoon, i've got my lab set up and have started doing some VLAN testing/work. I'm currently on the first chapter of this book but im not sure if i'll finish before the 30th September and do the ICND2 exam. Not sure if i'm doing the right thing here, do i just carry on or do i wait for the new ICND2 book n exam? Anyone…
-
NAT / PAT Question
Hi all. I'm a long time forum lurker. Thanks to many of your threads, I passed my ICND1 last month with flying colors and am off to crush the ICND2 early next week. I've been studying hard and have a firm grasp on most of the topics. I totally understand static & overload (PAT). I do however, have an dumb question about…
-
Passed ICND2!...
Well, I am glad I didn't reschedule, I manned up and took the exam earlier today. Back in January, I decided that my goal would be to have the CCENT by June, and CCNA by September. I'm also a full-time student so this would be along side my school studies. I knew it was going to be a lot of work but it would be worth it. I…
-
2 weeks left before CCENT exam
So I have been studying hard the last month for CCENT 100-101 with the idea of writing by end of August. Decided today on test day which will be 28 August same day as my birthday. So I got 2 weeks left, any advice from you guys?
-
Connecting GNS3 to Virtual Hosts Question...
Hey guys/gals. I've been running GNS3 on my laptop for a while now, but never have figured out how to add more than one VMWare Virtual host. I'm using a loopback adapter to connect my host to my laptop's ethernet connection, which connects to my virtual GNS3 routers. I want to use more than one host. Is there a way to…
-
ICND2 (640-816) Scheduled
So, I scheduled my ICND2 for this coming Saturday 8-17-2013. I may be rushing, but in the past 8 weeks I've passed 4 exams (LX0-101, LX0-102, PW0-105, and ITIL-F 11'). I just feel like I'm hot right now and don't want to lose steam!!! I've labbed it up over the last couple of months, and feel really comfortable with my IOS…
-
WMM and Cisco Phone
I am bit new to using voice on wireless. Should wmm ever be disabled? Reading through Cisco doc Configure 802.11n on the WLC I found this: "Note: Do not enable WMM mode if Cisco 7920 phones are used on your network. You cannot enable both WMM mode and client-controlled CAC mode on the same WLAN. When an AP-controlled CAC…
-
Serial link and frame relay question
I have two routers connected via a serial cable, and for the life of me I cannot get the link to work with Frame relay. I wonder if you folks can maybe give me a hint as to what I am missing. here is my set up: Router 1 is a 2610XM with a 4A/S serial module.interface Serial1/0 description : DCE/DTE to r2620 ip address…
-
Frame relay with four routers
Following on from the two router scenario, I've attempted three routers connected to a frame relay router via an 8A/S NM. The output for the connected serial ports is as follows on the frame relay router: FrameRelay# ! interface Serial1/0 no ip address encapsulation frame-relay no keepalive clockrate 64000 frame-relay…
-
ICND1 and the new one!
Can I take the old exam and after passing before Sept. 30 only have to take the new second exam for CCNA cert?
-
Passed ICND1!!! whoo whoo
After joining the "I failed the ICND1 club" last week, I retook the test today and PASSED with an 862. Last time I took the test I was very weak on the switching and WAN questions because I simply skimmed over the material to spend more time on other topics. Well after my fail, I studied hard for a full week and got all…
-
Passed my ICND2
Another great achievement, this time I completed the CCNA. :D From May to August, I passed Network+, ICND1 and ICND2. I have been thinking what direction to take from now, should i continue with Cisco or do Microsoft Server certification I am worried a bit, Cisco is yet to send me the congratulations email with the…
-
Stuck with CCENT/CCNA specifially cabling
Hi, guys Currently, I am working on my CCENT/CCNA. But I am stuck on cabling specifically straight-through, crossover, and rollover cables, specifically pins numbers and positions and their connection to PC's <servers>, Routers, switches, hubs. My sources: Wendell Odom Official Cert Guide ICND1 100-101 Cisco website: cisco…
-
127.0.0.1
On a PC, we ping 127.0.0.1 to make sure the PC's IP stack is installed correctly or not. I found I can also ping 127.0.0.2 or 127.254.255.255. They all work. The one IP address that I cannot ping is 127.255.255.255. Does pinging these addresses do the same thing? Is there a difference among these IP addresses? What's its…
-
Have ICND2 scheduled for tomorrow... just not sure...
Less than 24 hours, so I can't reschedule. Problem is I just want it so bad and am not good at exams like this. Passed ICND1 back in April, didn't think I even passed that one. Was amazed when I saw I did... almost felt like a fraud lol... so now I go into ICND2. Studied every single day since ICND1. Countless hours and…
-
Where are VTP info stored?
I entered the following vtp commands, but I don't see them on running-config and I don't see the file vlan.dat created in flash:. Where is this information stored? S1(config)#vtp mode server Device mode already VTP SERVER. S1(config)#vtp domain Lab5 Changing VTP domain name from NULL to Lab5 S1(config)#vtp password cisco…
-
Last minute questions
I have the ICND1 exam scheduled for Wednesday, but had some last minute questions. 1. The first one is syntax. On the Boson exams the command to configure an interface command is "interface s0/0" but in the NetSim by Boson they use "interface serial 0/0/0". Which is correct? I'm assuming that I should do the format listed…
-
STP Convergence
Hello folks, I'm new here and am looking forward to using this forum. So, I've been studying STP and I'm a bit puzzled. The whole purpose of STP is to prevent loops that cause broadcast storms, but what makes STP's BPDUs special and able to compete with the flooded traffic to block the loop? This is how I think the…
-
info just not going in
So I'm self studying for the ICND1 using the lammale book. I'm reading a chapter a day then the following day before I read tje next chapter I take the quiz on the previous chapter. I'm only on chapter ³ but what's becoming evident is I'm not really absorbing the information despite readig chapter 3 on WANS 3 times I still…
-
Can't ssh to SW1
I setup a small network in PT and I can't ssh to SW1 or ping it. Username is kyle, password is k1. Index of /Other/PT
-
Is it only me or WTF is wrong with the official CCNA Voice Cert Guide.
Is it only me or WTF is wrong with the official CCNA Voice Cert Guide. It does not cover any CUCM config , presence etc. at all. In fact its pretty much a 'beginners guide to CCME and Unity Express'. Yet the exam has tons of basic CUCM admin questions. Not a big deal for me personally but anybody going into CCNA Voice…
-
How to study commands?
I wanted to ask a few questions about ICND1 (the new one, not the old one). 1. What types of commands do you need to know, particularly the important ones? 2. How exactly do you practice those commands? I know you use some sort of packet tracer or GSN3, but am I just supposed to build random networks and test random…
-
Are these Contiguous Networks?
Hi Friends A problem from the Pearson exam(CD accompanied with the Odom book )which i post here- The above problem shows some subnets . Do these subnets constitute what is called a contiguous network? Thanks in advance.
-
Do you find CBT Nuggets off topic and over simplified?
My friend just signed up for the monthly membership for CBT nuggets, and he had me watch it. I honestly found that the content was over-simplified, and the narrator goes really off-topic many times. Has anyone else noticed it or is it just me? I was thinking of buying it because of all the great reviews I read here, but I…
-
ACL's and fragmented packets
Hi, I've just read a throwaway line in the OCG that says that a disadvantage of static packet filtering is Can anyone expand on that and say why please? Nick.
-
Remembering config register #'s?
How do you guys remember them?
-
MacNobody's ICND1 100-101 Study Log
I have tried going for CCNA before but I never actually put much effort into it. I recently finished a BS in IS Security degree (I'm 36, I couldn't care less about going to "graduation" so that's why I "finished" instead of "graduated" :D ) and now I have much more time to dedicate to this. I knew there was a change coming…
-
ccent lab time?
Hi, Just wondering how much lab time ye guys put in roughly for this one? I bought netsim so guna go through all of those. Thanks
-
I have access to five 7960s - is this sufficient?
I will be doing CCNA Voice next and looking ahead to what hardware I will need to gather up. I have several 7960 phones available, are there any "preferred" models?
-
CCNA lab
Quick post, looking at setting up a small lab which I guess will grow in time. Tried sims but I prefer to be hands on. How does the following look or sound? 1 x 1760 router (says no serial interface) 2 x 2950-24 switches 1 x 1721 router would anybody go with this or should I rethink? I know a lot of people say sims are…
-
Resources for security in Cisco
HI guys I wanna get familiar with security in Cisco devices .Except CCNA security materials which resources I can use ?Any book,website..?
-
Well ICND2 (old) scheduled for Sept 2nd
Looking to pass it on the first go if not i think ill give myself time to try again before the deadline
-
Will studying for the 640-822 hurt in taking the 100-101?
I'm comparing the exam objectives for both and while they are there is a difference, I am wondering if someone who fully understands the material from the 640-822 exam can pass the 100-101 without having to purchase new material?
-
Todd Lammle 6th edition ccna book
If I read through the CCNA 6th edition book by Todd Lammle as a primary source of studying for the CCNA wouId I be missing out on a significant amount of info for the exam or will I be still good to pass the exam?
-
ICND2 Notes?
Hey guys, I saw somebody post a great set of notes here not that long ago - it included a fairly long (20 pages or so) document about all the ICND2 topics plus a list of show commands. I saved it but have since reformatted - I'm having a tough time finding the notes again - can anybody point me in the right direction?…
-
ICND2 (old) scheduled for Aug 24th
Scheduled my ICND2 for Aug 24th - Wish me luck :)
-
CCNA passed
I just passed the icnd 2 today. I am happy I passed it, but i feel there is still a lot for me to learn. Does anyone else feel this way after the ccna? I know I have learned a lot in the pass few months, but I still think there is a lot ccna stuff I need to cover.
-
Extended Vlans Packet tracer ?
Ok, so I put the switch in transparent mode. When I begin to create the vlan, I only get the standard vlan range. I'm using packet tracer, can extended vlans be configured in PT ?
-
Passed 938/1000 on Aug 2
Passed CCNA Security 640-554 with score 938/1000 on Aug 2, 2013. The exam is not as hard as CCNA. You need to be very familiar with CCP, ASDM GUI. Self learning, material used Official Certificate Guide CCNA Security 640-554 By Keith Barker CCNA Security Lab 1.1 manual CBT Nuggets 640-554 by Keith Barker Boson ExSim-Max…
-
ICND 2 on Aug 15th...book question
Hello All, I scheduled my ICND 2 exam for August 15th. I've been studying since last month and am currently wrapping up the NAT chapter. The thing is I've been studying w/ WO's 2nd Edition as I don't have a copy of the 3rd. Money is tight, so I haven't bought any books. I have a pdf copy of the 3rd Edition but it only has…