-
getting past the Cisco IOS authentication?
The 2501 routers I bought finally came in the mail yesterday and when I console into them they are require a user name and password. Do I have to flash them to override the password? if so how do that and which .bin would I use with the 2501?
-
Pearson Test with Odoms CCENT book
Are the Pearson Exam simulators that come on the DVD with Odoms CCENT book, similar to the testing environment in the way the questions / simulators are presented? I hear people talking about Boson exams that come with Odoms book. Does this come with one of the other Odom books?
-
EIGRP wildcard mask
I'm just trying to wrap my head around eigrp, and all it's greatness. If I have statement as such R1 router eigrp 100 network 10.0.0.0 network 192.168.1.0 no auto-summary R2 router eigrp 100 network 10.0.0.0 network 192.168.1.0 no auto-summary What would wildcard mask do for me if I were to use it in my config? Isn't the…
-
PDU unable to send :(
Hello fellows out there! i've got a bit of a problem... and its getting on my nerves..:O My objective is to be able to send a PDU from PC3 to PC2 *through HQ*. So it must go though HQ to reach PC2. I've done the static route (exit interface) for B3 to reach HQ and a static route (exit interface) for HQ to reach B2. After…
-
odom's book
i have been told cisco is my next requirement at work. Browsing the sites it looks like this is the latest book by Odom CCNA 640-802 Official Cert Library, Updated (3rd Edition)' by Wendell Odom Is this broken down for the 2 CCENT exams/ I think this will be my easier route. Also, browsing some of the threads and getting…
-
Passed ICND1.....825....I'll take it
After nights and free time(wife and 2 kids) of studying,I manned up and grabbed the bull by the horns.....I passed my ICND1 today!!! I can't explain the feeling knowing that I was able to teach myself enough to actually comprehend enough of the test to get over that hump.All ppl out there thinking about…
-
Passed ICND1 today
Just passed ICND1 today but not by all that much. Didn't do as well as I hoped for but I still passed and I'll take it. I think I was to afraid of the time clock and having my simulations sprung on me at the end of the test with no time to do them. I finished with about 15 minutes to spare. I think if maybe I had slowed…
-
do i need to know about sdm for ccent
how much do i need to know about sdm for the ccent exam? are there any questions on the exam using sdm wanted to know as i havent paid much attention to this when reading books and watching videos thanks in advance
-
Does SDM work with GNS3?
Does anyone know if SDM works with GNS3? I have tried but get an error about IO. It works all the way to the very end before starting. IOS version 12.4 on 2621XM.
-
Doing CCENT this coming Friday - Scoring 60 percent in Transcender am I ready.
Doing CCENT this coming Friday - Scoring 60 percent in Transcender am I ready. I mean I understand the 60 percent I get very well but is the transcender harder than the real thing, I also took the practice test on this site and scored like 44 percent. Am I ready can somoene quiz me in ccent like ask practice stuff that a…
-
cannot add subscriber CUCM
So I have a demo image of cucm 8.5, i installed it as cucm publisher on Vmware workstation works great. Now i want to add another vitual machine with unity connection, but it wont pass "first node access configuration". It will reply "is <cucm> the correct first node for this node?" Basic setup: NTP server on GNS3,…
-
Passed the ICND2!
Hello! I just passed the ICND2 with a 944! I am so happy to be done with all of the CCNA material. The Cisco Press CCNP books have been sitting on my desk for too long! I'm moving right into the CCNP Route today while all of the previous exam's material is still fresh in my mind. The second edition ICND2 book from Cisco…
-
CCNA Lab choise
Greetings to everyone I am planning to purchase a ccna lab from ebay, just to start reading and spend some time in network learning, an maybe someday I will plan to take the exams. After reading a little bit about lab components, I finally made 2 possible choices: A) Cisco 3640/3620 Multi Plattfrom - Ethernet Frame Relay…
-
What kind of memory/software does stuff from Cables and Kits come with?
Yes, it's premade, and I'm fine with that. Maybe I'm paying a little more for convenience sake, but I take my car through a car wash, prefer takeout over cooking my own food, and don't feel like scouring ebay over however long it will take to find all the components I want at a decent price. I just want to know, is it good…
-
What is backbone router?
Please can any one explain what is backbone router. I don't want to google it.
-
Does 881W need 3 Antennas to Function (WLAN)?
Hey guys I believe I have the right configs done on this router but the wireless isn't functioning at all. I don't see it broadcasting my SSID name. I have zero physical antennas attached to it as it was given to me and they misplaced them. Do I absolutely need them for the router to perform wireless functions, or do they…
-
CCNA Journey
Ok Folks! CCNA scheduled for 3/9 - I will let ya'll know..... <fingers crossed>
-
Icnd2 fail
Urghhh just failed icnd2. Only by one question I reckon. I just ran out of time and had to rush the end. I had 5mins left, three questions to go an I was hit with a sim! I don't feel as bad as I thought I would but I'm going to reschedule for 2 weeks. The only pressure I feel now is what if I fail again.
-
Passed ICND2 with a score of 930!!! WOOHOOO!!!
Not sure if this constitutes a whole new thread but I just got home from taking ICND2 passing with a score of 930!!! WOOHOOO!!! For this exam, you MUST know how to subnet quickly and you MUST know all of the material. I was really tested on this one and I'd say it's pretty tough. Finally :)
-
CCNA Voice Passed!
I passed the CCNA Voice a few days ago!! That also gives me credit to finish out the A.A.S. in Networking. I used the lab at school, CBT Nuggets, the INE videos that are free right now, Cisco press Official Cert Guide.
-
Magic Jack to FXO
I have the original Magic Jack. To the router, I'm thinking if I plug that into the FXO port it will think it's connected the PSTN. Is there anything I'm missing?
-
Greetings & Salutations. First time posting on TE...
Hello all, I've been a long time observer of the threads here on TE and finally decided to make my first post. A little about myself, I'm a newly minted CCNA, which I studied for 10 years and finally grew the balls to attempt. For the past four years, I have worked in a NOC for a large Telecommunications company based in…
-
Is it possible to prepare for the CCNA in a month?
I'm 3/4 through the Net Acad! Do you think its possible to spend only a month doing practice exams and so on? Currently half way through LAN Switching and Wireless CCNA3 Exploration! Many Thanks
-
Need some help on DHCP or NAT
I’m trying to decide if I should look into using DHCP or NAT for my networking project. I have two 1721 routers connected by serial. I have 1 PC connected to each router through a crossover cable. I will have one router connected to the internet. I believe I will have that router doing all the DHCP or NAT. As for the…
-
RSTP Backup Link
Evening / Morning / Afternoon all, Just finished watching one the CBT Nugget Videos on Spanning Tree. A lot of you have probably seen it also. Jeremy demonstrates RSTP in action by shutting down a root port during a Ping between PCs. The backup port the came up instantly and none of the pings were dropped at all. Is this…
-
Trying to understand the question
The Headquater has given IP address range 192.168.0.0/27 for the network behind our router, then you have to: 3.1 enable interface Fa0/0 and set IP address/Subnet Mask to be the last IP of this subnet that has 10 host as members. 3.2 enable interface Fa0/1 and set IP address/Subnet Mask to be the last IP of this subnet…
-
ACL help
Ok guys I am getting very frustrated here. I have a quick question on my ACL. First let me start off with what I am doing. I have created a vlan on a layer 3 switch that will be a guest network that will need no services other then facing the internet. This is taken care of. I want this vlan to be separated from the other…
-
Taking ICND2 in ~3 hours
With the day finally here, I had planned to go over some practice test questions (boson) and as I have been doing them this morning, I've started to get really nervous and feel like I'm having an anxiety attack or something! Funny, I wasn't at all nervous until today came and I feel that doing these practice questions…
-
Does PPP "advertise" the /32 host route?
Couldn't find a better word than advertise so forgive me if it's inaccurate but while playing with PPP(authentication and enabling) I noticed some odd behavior. No routing protocol was enabled, yet the router at the other end of the point to point link had an entry in its routing table for the distant interface, a /32…
-
Starting to learn CCNA Voice
I have started getting equipment to learn CCNA Voice and have a couple of questions. 1. I have no phone lines in my house, only Internet through cable. Do I need a phone line and what to I need. Do I have to get a POTS or maybe use MagicJack. 2. If I don't need a phone line, do I need to get FXS and FXO interfaces?
-
uccx wallboard??? what is it for
what is this for??
-
Free CCNA Voice training
I'm not doing Cisco but someone might find this useful. From Dealnews.com New: Cisco Certified Network Associate online courses for free via streaming INE offers its Cisco Certified Network Associate (CCNA) Voice and Routing & Switching Online Courses for free via streaming. That's $199 off. To see them, you'll need to…
-
Earl! Price Check on a Cisco Switch!
So Ive been putting together a home lab over the past few months. Currently its as follows: 3x2610 1x3550 1x2950 The 2610's were an accident, well they were a result of a piss poor auction listing. Either was I got screwed. A local guy has a 2950 and a 2950T for sale. I want the 2950T so that I can have a poor mans Cisco…
-
connect OSPF to RIP networks ! help me !!
Hi I have a project of how to connect different networks with different protocols together as the following picture explains : but when I completed every thing like addressing and configuring the routers of the different protocols , I had a problem I don't know where in the VLSM network I made a summary for the different…
-
Failed CCNA 640-802
I am now thinking my options, If will retake the 2 route (ICND1 and ICND2 or retake 1 route test(CCNA Composite Exam). Although my study is on and off for the past 3months because I am busy at work. Is ICND1 more on subnetting ? I know my subnettings skills but my weak area is about ACL's ,NAT. Don't have much time for…
-
ICND 2 scheduled for April 21st
I just scheduled ICND 2 for April 21st. I have some more prep to do but I wanted to put the test on the calendar. I experienced early success on my CCNA journey passing ICND 1 on my first attempt. However, I have not experienced the same success on my previous attempts at ICND 2. However, I recently took a job where I work…
-
Hardware questions *help!*
Hello, I'm new to CCNA and begun setting up a lab in my office at work.. Right now I have 1 Cisco 3550 & 2950 switch and now i'm looking to get some routers. I've been scanning these forums and read few articles that the 2501's are good to start but need ram upgrades and IOS upgrades to be any good this true? or they still…
-
Finally figured out why I couldn't telnet into my 2950
Been trying to do a IOS upgrade on my 2 2950s. Switch 1 and Switch 2. Everytime I would try to telnet into the first one it would time out. Then I realized I forgot to connect the ethernet cable into the switch. DUH Thought I was connected to it because I had an ethernet cable already plugged into it that I forgot was…
-
Need some help with these....
can someone help me with these questions? how to find out frame relay dlci assigned for the other end? show frame-relay map? what the heck is stp proposal - agreement sequence? does the exam mean the root election? does stp and rstp have the same? yes? which vlan range can be addedd modified and removed? i know now that…
-
Passed ICND1!
Hi everyone, first time poster, long time lurker. Finally buckled down and took my ICND1 today, passed with an 850. Not a great score, but it was passing and I know why I didn't do better. I was coming down to the wire on my 50% voucher that I got from doing the Cisco Academy at the local community college, and really…
-
Whooo! Passed CCNA Sec today
Passed today with a reasonable score of 900 (which I'm more than happy with). Must say, the exam was alot easier that I expected it to be! Onto CEH next!!
-
Question from Odoms book
Hi, Reading Odoms ICND1 book and one of the questions is... Which of the following protocols are examples of tcp/ip network access layer protocols...choose 2 A) Ethernet B) http C) IP D) UDP E) SMTP F) TCP G) PPP The answers are a and g. I thought Network access layer would have been IP at least no? Does A and G seem…
-
Hyperterminal not executing after hitting enter.
I have searched all over the place for an answer for this. I saw something on this while looking for another problem with hyperterminal last night but when I ran into this problem I couldn't find the information again. So after kinda getting my lab going last night I decided to fool around with one of 1760 routers a little…
-
Dynamips question
Is there anyway to copy a config from dynamips? I want to copy a config that I have made so I can post it online, but ctrl c/v doesnt work, and i cant right click in the console window. anyone have any suggestions?
-
Study Methods
Hello TE, I want to know what are your guys study methods pertaining to to ICND1 or anything else? I haven't found my niche yet for my studying style but I believe it will come. Thanks.
-
CCNA2 : Packet Tracer issue (7.6.1.3) please help!
Im wondering if someone can please help me. Im working on CCNA2 (Routing) Packet Tracer Challenge 7.6.1.3 and I'm having problems completing it. The topology is configured properly (confirmed by PT) HOWEVER I keep on getting connectivity test failed for PC2 to Webserver (209.165.202.130). When I run the connectivity…
-
Good article for those considering going for CCNA Certification
For anyone considering going for a CCNA Certification: The 10 best IT certifications: 2012 | TechRepublic
-
CCNA Voice 640-461 certification help
Hi, I will be appearing for my ccna voice 640-461 exam on 18th March 12, please let me know is there are any simulation in exam? Thanks in Advance! Regards, Anil
-
Terminal Server Error
-
Cisco Network Academy voucher question
I'm about to receive a voucher discount for completing cisco network academy. Does anyone know if the voucher can be used for the CCENT or is it only for the CCNA?
-
basic settings and implementation of EIGRP - 1
i have started to post again. I will go deeper and deeper (as much as i know). I have tried to show everything in a clear way and support them by pictures and comments IP Routing from scratch. EIGRP implementation-1 (includes basic settings and tweaks) « studentCodes
-
2950-24 switch and trunking
Does anyone know if the 2950-24 switch with ios 12.1 supports trunking? When i connect a crossover cable to both fa0/1 ports i get no lights before doing anything. I have followed instructions on cisco's site for the 2950 model but vlan 1 and the ports never come up. If i do switchport mode trunk on both switches I get no…
-
Communications Manager Server
Hello all, I tried to install a copy of CUCM on a virtual machine earlier and it failed. I'm thinking that since I'm running 32-bit windows with only 2GB of RAM is why it actually failed. I've been thinking about getting a server, which is 64 bit... Just wondering if anyone has any recommendations on what server to…
-
Failed ICND2 yesterday
Hi guys, normally lurk rather than post on here but just wanted to share my failure, I was absolutely gutted to miss the pass mark by 7 points. I took too much time on the questions and then didn't have enough time to answer the last 2 questions that were sims. Anyway going to try again in 2 weeks. Good luck everyone
-
packet tracer extended ACL with Telnet
Hi Guys, I have a simple set up of a router and two pc's.I've tried a standard ACL to allow a host to the destination and the telnet works fine. I have now tried to be more specific and I have added the extended ACL to the vty lines? But the connection is still refused. If I run a simulation the Packet is set on the router…
-
What cards to use in Cisco Routers in a hame lab?
I'm building a home lab to do Cisco training with at my house. What cards are good to load into Cisco routers? Are WIC-1DSU-T1V2 and WIC-1DSU-T1 good cards to use?
-
help for virtual lab
hi sirs i turn to you for many questions and i wonder : i would like a help and some hands help too i've to manage a big network : Gwan > voice > switch > lan All materiel : Routers : 2800 series Switch : 3750 , 4500 series i'm searching to do a virtuel lab on my machine for switches and routers could you hep THX
-
putty or tera term connection managers
Hi, What is your connection manager of choice for either putty or teraterm? I am currently using SuperPutty, I like it so far as it lets you save sessions on the right side and have multiple connections open in one window with tabs. I have my devices connected to the console server, and I telnet to the console server to…
-
Not passing the practice test
I saw a lot of feedback here about Boson Practice test more difficult than the actual exam, I am using the Boson Exam Sim 640-802. Is there a chance that somebody here took the test and pass by not getting the passing score from this practice test ? I just want to gauge the difficulty of the exam.
-
Frame-Relay Problem
The problem - R2 and the devices on the R2 network cannot ping R1 or R3 - R1 and R3 can ping each other just fine, R1 / R3 can successfully send a packet to R2 but cannot receive them as the packet stops at the R2 router upon sending the ping request back. ((Btw R3 is using S 2/0 not S 3/0 - That was a typo)) Configs…
-
Question about subnetting
Below is the sample subnet; IP Address. . . . . . . . . . . . : 172.18.243.144 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 172.18.240.1 the resident subnet is 172.18.240.0 the first host ip address is 172.18.240.1 the last host ip address is 172.18.243.254 the broadcast address is…
-
Advice on CCNA materiel
Hi guys 1- Is trainsignal video's a good materiel to prepare for CCNA ? 2- For router simulations i've the GNS 3 with some cisco iso 3- For switch simulator i've only packet tracer , could you please advice me on a good switch simulator ? i'm in an impossible mission so i need to master queckly and easily all YK
-
CCNA Exploration 2 Chapter 7 Packet Tracer Skills Integration Challenge Help
I'm currently doing the Chapter 7 Packet Tracer Skills Integration Challenge but when I click the Check Results button it says that my RIP Passive Interfaces are incorrect. It's the same for B1, B2, B3, and HQ. FastEthernet 0/0 FastEthernet 0/1 I already did B1(config)#router rip B1(config-router)#passive-interface…
-
point of the EIGRP wildcard
Hey guys, Just configured a quick EIGRP in my home lab without the wildcard option. I included no-auto in my config and everything worked just fine. Obviously I would think you want to use the wildcard option if you have a more specific subnet perhaps? Such as a /19 or a /28 but the routing table on my config didn't really…
-
Is there really no maximum limit of routers in GNS3?
Googled this and it would seem that there isn't but... Seems like when my topology gets to 9 ~ 10 routers, some of them act as if they are other devices in the topology. Example. Say I have router a and b. If I console in to router b, it brings up the session for router a and I end up configuring router a. It's a real pain…
-
Passed ICND1 ... 950!!
I passed my exam this morning with a 950! I received a 0 for the WAN category. I had 30 minutes remaining when I finished. Here is how I passed . (With my recommended order) 1. CBT Nuggets - Jeremy is the man!! 2. Lammle Book - My favorite 3. Odom - More detail 4. Boson Exam Prep (Amazing) After going through steps 1,2,…
-
Standard ACL - Fixing a misconfigured ACL
I am working on an end-of-chapter review problem from my "Accessing the WAN" book. I believe they made an error but I need a second pair of eyes as it may be me who is mistaken. The question: "Refer to the figure and the following configuration. ACL 10, configured on R1, is designed to deny the host at 192.168.10.10 access…
-
2950 Cisco swicth output -- Spanning-tree---
Hello, I am currently working through some labs, and at the moment I am going through the Spanning-tree section. I have a question in the regards to the output that I am getting on my 2950 switch. When I type: #show spanning-tree The table at the bottom that shows the interface status does not show the "Role" section that…
-
Configuring Frame Relay ?
Hi everyone, I'm working on the Frame Relay Lab provided by packettracernetwork.com and I seem to be misunderstanding a concept. The understanding I had was that DLCI numbers were locally relevant and when setting up point-to-point connections, that I would just provide the local DLCI number in the configuration. So, New…
-
Just Joined The CCNA Club :D
What a ride these last eight months have been. I took the ICND1 exam a month and a half ago after 5 months of on and off studying and passed. With the impending move to San Francisco, I have since the ICND1, been in absolute study mode. Hours every day. Weekends consisting of only studying. My goal was to nail this…
-
Cheap 640-721 CCNA Wireless Certification Kit
Guys, here's all the hardware you need listed right here: eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices For $1400 this is all your's. Otherwise, the highest bidder wins. This is all the equipment suggested in the introduction of the CCNA Wireless Certification Guide. The…
-
Frame-Relay / LMI question
If there's a problem with LMI, such as when you run the command "show frame-relay lmi" and you find an error, where should you begin to seek the solution?
-
A switch in software?
I've been reading here a bit on what people have used to build their labs and I've come to understand a few things. It appears that many agree that a GNS3 simulation will get one about 60% of what they need to understand the switching for the CCNA tests. A single hardware switch will get a person about 80% of the way.…
-
What am I doing wrong with this zone firewall setup
Hi guys for collague I have to complete this question ]Configure the number1 router to act as a zone-based firewall. Configure the router to protect the network occupied by number1-PC from the network occupied by number2-PC, but allow the networking represented by Loopback0 to be accessible by the network occupied by…
-
ICND1 / 640-822 How many simulator questions are on the real exam?
Approximately, how many simulator questions did you receive on the 640-822? What was the topic of the majority of the simulator questions? Do not violate Cisco's exam disclosure policies. The purpose is really for concentration of study material.
-
adsl query
I've got a question that I hope some of you guys have configured at home before. I've got my ADSL line coming in and connected to my ISP router. I'm wondering, can I plug my ISP router in to a Fast Ethernet port on my Cisco lab routers and then create a default route to get out on the internet? How would you normally…
-
2509-RJ - What cable
Hi, The Above router which has the 8 RJ45 A Synch Ports. To connect my devices to it (I'll be using it as an access server) do I just use a standard crossover cable from the 2509 asynch port to my devices console port? Thanks
-
Virtual Machines used for testing connectivity in CCNA Labbing??
This may sound like a stupid question but I want to know if it's possible for virtual machines to be setup on different networks of a CCNA test lab so as to test connectivity between networks (i.e. pinging). If it is possible then how can I achieve this?
-
2950 switch finds default gateway without being configured?
Quick question; I erased the config file on my switch, it is plugged into my consumer router. When i first access the switch, there is no internet access. When I issue the no shutdown vlan1 cmd, I can access the internet through my laptop plugged into the switch. Now this is all without setting up the default gateway. I…
-
6to4, teredo and 4to6
HI, Could someone just confirm this for me: 6to4 tunnel is so that IPv6 hosts can communicate over an IPv4 network - creating a tunnel to the other IPv6 host? 4to 6 tunnel is the reverse of the above? What is a teredo tunnel? - something about dual stack (which allows both IPv4 and IPv6 to run on one host)....
-
I see a lot of people talking about Boson exams but what about cisco academy test?
I'm currently going through the Cisco Academy and I'm wondering how similar the actual Cisco certification test compares to the academy test. I understand that each test from the academy is based on a single chapter, except for our final. But will the questions be similar, etc?
-
Material for CCNA:Voice
My only question is: does anyone know of any changes that are happening in the near future for this exam? I'm thinking about buying a Cisco Press book for this, I didn't want to buy it and then the topics change.
-
Ccent - Tuesday
Hi guys, Booked my ICND1 for Tuesday after a month and a half of study. My study plan was: Watched CBT 2x Watched TrainSignal 2x Read Odom book 2x, 2nd time doing notes on every page Spent 1 whole day on subnetting Spent 1 whole day on configuration and show commands Spent whole day today on Boson exam sim (bought today,…
-
Problems with pinging*
Hey friends out there, i've encounter a weirdo problem. I've done all my static route on all of the routers but i still cant ping from Each router to another. What could be the problem ? PRACTICE.pkt Help would be appreciated! Thanks!
-
Routing private addresses between different sites?
Hello, I'm hoping to get a little clarification on this since it's not quite clear how this works. Let's say I have three separate office sites, and I want employees from each site to be able to connect to any of the servers in the other sites. So in that case, I have to set up my IP addressing to never overlap, otherwise…
-
Suggested changes for my home lab?
I have 3 x 2600 series routers with WIC-2Ts, 3 x 2950 switches and a 3550 switch. I have this for my CCNA lab. Can you recommend any changes or additions if I was going to go for my CCNP? I am debating going for the CCNP after I get my CCNA but would like to go ahead and buy whatever I need now instead of waiting for after…
-
Passed ICND2: Finally CCNA!
Wow, just got back from the Testing Center. Scored an 846. I must say that the exam was difficult, at least to me like three times more difficult than ICND 1. Also, I kinda got demotivated early in the exam because i realized that i had made a mistake in a simulation after clicking next. Arggghh! Anyway a pass is a pass.…
-
New Home Beginner Lab
Ok, so I am in school for Networking and Adminstration so I am taking the Cisco CCNA classes and building a lab at home to be able to conduct all the labs here rather than at school (almost 2 hours away one way, and I work full time) as this will provide me with the time to actually work on the equipment and learn. I…
-
Lab is taking shape.... and why I think this is a better choice vs. a simulator/gns3
Just thought I'd share my initial experience with my home lab build in progress and why I think it's better vs. just using something like Packet Tracer or GNS3. Here's the topology so far: 2511 router that is mainly going to be a console router, but will most likely do frame relay functions as well 2621 router with 2…
-
Just getting started - looking for PT labs
Hello, all, and thanks to those responsible for running this site. Lots of useful info. I've been studying Net+ and CCNA materials for the last several months, and I'm looking for labs to work through on Packet Tracer 5.3.3. Anyone know any good places to find them? I've been to packettracernetwork.com, and found the ranet…
-
Boson Exams
Hi All, I no these have been mentioned a fair bit recently but wanted to ask are they really worth the cash? Downloaded the demo today and looks good can you break the exams into catergories? Eg OSPF,ACL's and STP? Alos how often do people do practice exams? I have my exam in 10 days and starting to paniac as I dont think…
-
Signed up for ICND2. The count down begins!
It's amazing what one does when properly motivated. After hearing of a fellow co-worker possibly going to the NOC (simply because one of his professors works there), I decided to finally schedule my ICND2 exam. I was supposed to be done with CCNA last year but I got this job on the helpdesk and frankly am ready to move on.…
-
inter-vlan routing
hi everyone.. im presently studying ccna and i am using RouterSim Network Visualizer. i encountered a problem when configuring the router for the inter-vlan routing. everything was okay for the "show run" after configuring the fast ethernet subinterfaces. but for the "show ip route" this was the result: Gateway of last…
-
Router on a stick question!!!
Hello, I am currently working on a lab, that is a "Router on a stick set up", I am using a 2x 2950 switches and a 2520 Router to do this, in the workbook it states that the interface on the router is a fastethernet. I am current using an ethernet interface to set up my sub commands by the only this is: When I type:…
-
Cisco firewalls
Hey guys, am I right in thinking that the access-lists that are configured on a firewall are slightly different to the ones configured on a router? I'm not sure where I got this from but I seem to remember something about it being different, as in things coming in and out? Or is this the same as I've doing for a Cisco…
-
Building a lab
After not passing the CCNA, using all sorts of simulators, books, videos, and the very expensive bootcamp I took , I came to the conclusion that I need the equipment on hand, to play with, whenever I want to. I scoped out a few CCNA Lab packages on Ebay. Can anyone recommend some sort of a rolling rack? I am going to put…
-
Studying for CCENT - Study Suggestions?
I hear Transcender and Boson both have good practice exams and sims, what do you guys prefer and why? Thank you for any advice.
-
Practice Password Recovery on Packet Tracer 5.1
Anyone every practice password recovery using Packet Tracer? Is the break sequence used to get into rommon1 the same as it would be on an actual router? Thanks in advance....
-
Debug in Production Environment
Hi All, Everytime I read about Debug commands, there always seems to be some sort of warning..."Do Not Use In Production / Careful when using in Production"....you know the ones I mean! Maybe this is aimed at those working in the field. Are there certain rules of thumb to follow when using Debug in a production…
-
Passed CCENT today
Hey all-- Passed CCENT this morning, so I wanted to stop by and thank everyone for the wealth of information and support here. Some notables: Score: 874 Resources used: Cisco Press by Odom, packet tracer, boson exam environment, CBT Nuggets In all honesty I'm disappointed in my score. I think I was thrown off because this…